Smart Structures and Systems

  • 제23권4호
  • /
  • Pages.337-345
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic behavior of a seven century historical monument reinforced by shape memory alloy wires

  • Hamdaoui, Karim (Department of Civil Engineering, Faculty of technology, University of Tlemcen) ;
  • Benadla, Zahira (Department of Civil Engineering, Faculty of technology, University of Tlemcen) ;
  • Chitaoui, Houssameddine (Department of Civil Engineering, Faculty of technology, University of Tlemcen) ;
  • Benallal, Mohammed Elamine (Department of Civil Engineering, Faculty of technology, University of Tlemcen)
  • 투고 : 2018.05.14
  • 심사 : 2019.01.26
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

This work resumes a research that proposes the use of the technique based on the dissipation energy of the shape memory alloy (SMA) ties. It focuses principally on the assessment of the effectiveness of the use of these smart materials on displacements, accelerations and the stresses of the minaret of the great mosque of Ajloun in Jordan. The 3-D finite element model of the minaret is performed by the ANSYS software. First of all, the proposed model is calibrated and validated according to the experimental results gathered from ambient vibration testing results. Then, a nonlinear transient analysis is considered, when the El-Centro earthquake is used as the input signal. Different simulating cases concerning the location, number and type of SMA devices are proposed in order to see their influence on the seismic response of the minaret. Hence, the results confirm the effectiveness of the proposed SMA device.

키워드

참고문헌

  1. AlSaleh, R., Casciati, F., Al-Attar, A. and El-Habbal, I. (2011), "Experimental validation of a shape memory alloy retrofitting application", J.Vib. Control, 18(1), 28-41.
  2. ANSYS computer software (2003), ANSYS Inc., www.ansys.com.
  3. Azariani, H.R., Esfahani, M.R. and Shariatmadar, H. (2018), "Behavior of exterior concrete beam-column joints reinforced with Shape Memory Alloy (SMA) bars", Steel Compos. Struct., 28(1), 83-98. https://doi.org/10.12989/SCS.2018.28.1.083
  4. Bani-Hani, K.A., Zibdeh, H.S. and Hamdaoui, K. (2008), "Health monitoring of a historical monument in Jordan based on ambient vibration test", Smart Struct. Syst., 4(2), 195-208. https://doi.org/10.12989/sss.2008.4.2.195
  5. Ben Jaber, M., Trojette, M.A. and Najar, F. (2015), "A finite element analysis of a new design of a biomimetic shape memory alloy artificial muscle", Smart Struct. Syst., 16(3), 479-496. https://doi.org/10.12989/sss.2015.16.3.479
  6. Casciati, S. and Hamdaoui, K. (2008), "Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures", Smart Struct. Syst., 4(2), 153-169. https://doi.org/10.12989/sss.2008.4.2.153
  7. Chrysostomou, C.Z., Stassis, A., Demetriou, T. and Hamdaoui, K. (2008), "Application of shape memory alloy prestressing devices on an ancient aqueduct", Smart Struct. Syst., .4(2), 261-278. https://doi.org/10.12989/sss.2008.4.2.261
  8. Contreras, M.T., Pasala, D.T.R. and Nagarajaiah, S. (2014), "Adaptive length SMA pendulum smart tuned mass damper performance in the presence of real time primary system stiffness change", Smart Struct. Syst., 13(2), 219-233. https://doi.org/10.12989/sss.2014.13.2.219
  9. Ghawanma, Y.H. (1986), "Ancient Islamic Mosques in Ajloun", Jordan Center Studies Publications, Al-Yarmouk University, Irbid, Jordan.(In Arabic).
  10. Hamdaoui, K. (2006), "Historical monument health monitoring based on ambient vibrations"; M.Sc. Thesis, Jordan University of Science and Technology, Jordan.
  11. Hamdaoui, K. and Benadla, Z. (2014), "Dynamic analysis of a historical monument: retrofit using shape memory alloy wires", Smart Struct. Syst., 13(3), 375-388. https://doi.org/10.12989/sss.2014.13.3.375
  12. Heresi, P., Herrera, R.A. and Moroni, M.O. (2014), "Testing and modelling of shape memory alloy plates for energy dissipaters", Smart Struct. Syst., 14(5), 883-900. https://doi.org/10.12989/sss.2014.14.5.883
  13. Mehrabi, R. and Karamooz-Ravari, M.R. (2015), "Simulation of superelastic SMA helical springs", Smart Struct. Syst., 16(1), 183-194. https://doi.org/10.12989/sss.2015.16.1.183
  14. Ozbulut, O.E. and Silwal, B. (2016), "Performance assessment of buildings isolated with S-FBI system under near-fault earthquakes", Smart Struct. Syst., 17(5), 709-724. https://doi.org/10.12989/sss.2016.17.5.709
  15. Preciado, A., Ramirez-Gaytan, A., Gutierrez, N., Vargas, D., Falcon, J.M. and Ochoa, J. (2018), "Nonlinear earthquake capacity of slender old masonry structures prestressed with steel, FRP and NiTi SMA tendons", Steel Compos. Struct., 26(2), 213-266. https://doi.org/10.12989/SCS.2018.26.2.213
  16. Qiu, C., Zhang, Y., Qi, J. and Li, H. (2018), "Seismic behavior of properly designed CBFs equipped with NiTi SMA braces", Smart Struct. Syst., 21(4), 479-491. https://doi.org/10.12989/SSS.2018.21.4.479
  17. Torra, V., Carreras, G., Casciati, S. and Terriault, P. (2014), "On the NiTi wires in dampers for stayed cables", Smart Struct. Syst., 13(3), 353-374. https://doi.org/10.12989/sss.2014.13.3.353
  18. Zhou, X. and You, Z. (2015), "Theoretical analysis of superelastic SMA helical structures subjected to axial and torsional loads", Smart Struct. Syst., 15(5), 1271-1291. https://doi.org/10.12989/sss.2015.15.5.1271