DOI QR코드

DOI QR Code

Local buckling of rectangular steel tubes filled with concrete

  • Kanishchev, Ruslan (Department of Steel and Timber Structures, Institute of Structural Engineering, Civil Engineering Faculty, Technical University of Kosice) ;
  • Kvocak, Vincent (Department of Steel and Timber Structures, Institute of Structural Engineering, Civil Engineering Faculty, Technical University of Kosice)
  • 투고 : 2018.07.21
  • 심사 : 2019.03.30
  • 발행 : 2019.04.25

초록

This scientific paper provides a theoretical, numerical and experimental analysis of local stability of axially compressed columns made of thin-walled rectangular concrete-filled steel tubes (CFSTs), with the consideration of initial geometric imperfections. The work presented introduces the theory of elastic critical stresses in local buckling of rectangular wall members under uniform compression. Moreover, a numerical calculation method for the determination of the critical stress coefficient is presented, using a differential equation for a slender wall with a variety of boundary conditions. For comparison of the results of the numerical analysis with those collected by experiments, a new model is created to study the behaviour of the composite members in question by means of the ABAQUS computational-graphical software whose principles are based on the finite element method (FEM). In modelling the analysed members, the actual boundary and loading conditions and real material properties are taken into account, obtained from the experiments and material tests on these members. Finally, the results of experiments on such members are analysed and then compared with the numerical values. In conclusion, several recommendations for the design of axially compressed composite columns made of rectangular concrete-filled thin-walled steel tubes are suggested as a result of this comparison.

키워드

참고문헌

  1. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., Int. J., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  2. Aslani, F., Uy, B., Wang, Z. and Patel, V. (2016), "Confinement Models for High-Strength Short Square and Rectangular Concrete-Filled Steel Tubular Columns", Steel Compos. Struct., Int. J., 22(5), 937-974. https://doi.org/10.12989/scs.2016.22.5.937
  3. Baltay, P. and Gjelsvik, A. (1990), "Coefficient of Friction for Steel on Concrete at High Normal Stress", J. Mater. Civil Eng., ASCE, 2, 46-49. https://doi.org/10.1061/(ASCE)0899-1561(1990)2:1(46)
  4. Bryan, G.H. (1891), "On the stability of a Plane Plate under Trusts in Its Own Plane, with Applications to the "Buckling" of the Sides of a Ship", Proceedings of the London Mathem. Soc., 22, 54-67.
  5. Chen, Z., Liu, X. and Zhou, W. (2018), "Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures", Steel Compos. Struct., Int. J., 27(4), 509-523.
  6. Ding, F., Fang, C., Bai, Y. and Gong, Y. (2014), "Mechanical Performance of Stirrup-Confined Concrete-Filled Steel Tubular Stub Columns under Axial Loading", J. Constr. Steel Res., 98, 146-157. https://doi.org/10.1016/j.jcsr.2014.03.005
  7. Ding, F., Wen, B., Liu, X. and Wang, H. (2017), "Composite Action of Notched Circular CFT Stub Columns under Axial Compression", Steel Compos. Struct., Int. J., 24(3), 309-322.
  8. Ellobody, E. and Young, B. (2006), "Non-Linear Analysis of Concrete-Filled Steel SHS and RHS Columns", Thin-Wall. Struct., 44, 919-930. https://doi.org/10.1016/j.tws.2006.07.005
  9. EN 10219-1 (2006), Cold-formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels, Part 1: Technical Delivery Conditions, European Committee for Standardization; Brussels, Belgium.
  10. EN 10219-2 (2006), Cold-formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels, Part 2: Technical Delivery Conditions, European Committee for Standardization; Brussels, Belgium.
  11. EN 12390-1 (2000), Testing Hardened Concrete - Part 1: Shape, Dimensions and Other Requirements for Specimens and Models, European Committee for Standardization; Brussels, Belgium.
  12. EN 12390-2 (2000), Testing Hardened Concrete - Part 2: Making and Curing Specimens for Strength Tests, European Committee for Standardization; Brussels, Belgium.
  13. EN 1990 (2011), Eurocode: Basis of Structural Design, European Committee for Standardization; Brussels, Belgium.
  14. EN 1992-1-1, Eurocode 2 (2004): Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  15. EN 1993-1-1, Eurocode 3 (2005): Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  16. EN 1993-1-3, Eurocode 3 (2006): Design of Concrete Structures - Part 1-3: General Rules - Supplementary Rules for Cold-Formed Members and Sheeting, European Committee for Standardization; Brussels, Belgium.
  17. EN 1993-1-5, Eurocode 3 (2006): Design of Concrete Structures - Part 1-5: Plated Structural Elements, European Committee for Standardization; Brussels, Belgium.
  18. EN 1994-1-1, Eurocode 4 (2004): Design of Composite Steel and Concrete structures - Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  19. Evirgen, B. and Tuncan, A. (2014), "Determination of Frictional Behaviour between Concrete and Steel Tube Interaction", 7th Edition of the International European Conference on Steel and Composite Structures, EUROSTEEL 2014, Naples, Italy, September.
  20. Hu, H.-T., Huang, C.-S., Wu, M.-H. and Wu, Y.-M. (2003), "Non-Linear Analysis of Axially Loaded Concrete-Filled Tube Columns with Confinement Effect", J. Struct. Eng., ASCE, 129, 1322-1329. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
  21. Huang, Y., Long, Y. and Cai, J. (2008), "Ultimate Strength of Rectangular Concrete-Filled Steel Tubular (CFT) Stub Columns under Axial Compression", Steel Compos. Struct., Int. J., 8(2), 115-128. https://doi.org/10.12989/scs.2008.8.2.115
  22. ISO 6892-1 (2016) Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature, The International Organization for Standardization; Geneva, Switzerlamd.
  23. Kanishchev, R.A. (2016), "Analysis of Local Stability of Rectangular Tubes Filled with Concrete", Mag. Civil Eng., 64(4), 59-68. https://doi.org/10.5862/MCE.64.6
  24. Kanishchev, R. and Kvocak, V. (2015a), "Effects of Stability on the Resistance of Composite Concrete-Filled Rectangular Steel Pipes According to World Standards", IABSE Conference: Elegance in Structures, Nara, Japan, May.
  25. Kanishchev, R. and Kvocak, V. (2015b), "Interaction of Steel and Concrete Elements in Rectangular Concrete-Filled Hollow Sections", Proceedings of the 7th International Scientific Conference on Civil and Environmental Engineering - Young Scientist 2015, Kosice, Slovakia, April.
  26. Lee, S. (2007), "Capacity and the Moment-Curvature Relationship of High-Strength Concrete-Filled Steel Tube Columns under Eccentric Loads", Steel Compos. Struct., Int. J., 7(2), 135-160. https://doi.org/10.12989/scs.2007.7.2.135
  27. Lin, S.Q., Zhao, Y.G. and He, L.S. (2018), "Stress paths of confined concrete in axially loaded circular concrete-filled steel tube stub columns", Eng. Struct., 173, 1019-1028. https://doi.org/10.1016/j.engstruct.2018.06.112
  28. Liu, D., Gho, W.M. and Yuan, J. (2003), "Ultimate Capacity of High-Strength Rectangular Concrete-Filled Steel Hollow Section Stub Columns", Constr. Steel Res., 59(12), 1499-1515. https://doi.org/10.1016/S0143-974X(03)00106-8
  29. Lu, Z.-H., Zhao, Y.-G., Yu, Z.-W. and Chen, C. (2015), "Reliability-based assessment of American and European specifications for square CFT stub columns", Steel Compos. Struct., Int. J., 19(4), 811-827. https://doi.org/10.12989/scs.2015.19.4.811
  30. Mouli, M. and Khelafi, H. (2007), "Strength of Short Composite Rectangular Hollow Section Columns Filled with Lightweight Aggregate Concrete", Eng. Struct., 29, 1791-1797. https://doi.org/10.1016/j.engstruct.2006.10.003
  31. Patel, V.I., Liang, Q.Q. and Hadi, M. (2012), "Inelastic Stability Analysis of High-Strength Rectangular Concrete-Filled Steel Tubular Slender Beam-Columns", Interact. Multiscale Mech., 5(2), 91-104. https://doi.org/10.12989/imm.2012.5.2.091
  32. Qu, X., Chen, Z., Nethercot, D.A., Gardner, L. and Theofanous, M. (2015), "Push-out tests and bond strength of rectangular CFST columns", Steel Compos. Struct., Int. J., 19(1), 21-41. https://doi.org/10.12989/scs.2015.19.1.021
  33. Rabbat, B.G. and Russell, H.G. (1985), "Friction Coefficients of Steel on Concrete or Grout", J. Struct. Eng., ASCE, 111, 505-515. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:3(505)
  34. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of Centrally Loaded Concrete-Filled Steel-Tube Short Columns", Struct. Eng., ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  35. SIMULIA (2013), Abaqus 6.13. Analysis Users Guide, Volume I", Dassault Systems, RI, USA.
  36. Storozhenko, L.I., Ermolenko, D.A. and Demchenko, O.V. (2014), "Rabota pod Nagruzkoi Szhatych Trubobetonnych Elementov s Usilennymi Jadrami", [The Work under Load of Compressed Concrete Pipe Elements with Reinforced Cores], Eff. of Resource Energy of Techn. in the Constr. Industry of Region, 4, 288-292.
  37. Timoshenko, S.P. (1971), Ustoychivost Sterzhney, Plastin i Obolochek [Stability of Rods, Plates and Shells], Nauka, Moskva, USSR.
  38. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-Hill Book Company, New York, NY, USA.
  39. Uy, B. (2008), "Stability and Ductility of High-Performance Steel Sections with Concrete Infill", J. Constr. Steel Res., 64, 748-754. https://doi.org/10.1016/j.jcsr.2008.01.036
  40. Yang, Y. and Han L. (2009), "Experiments on Rectangular Concrete-Filled Steel Tubes Loaded Axially on a Partially Stressed Cross-Sectional Area", J. Constr. Steel Res., 65, 1617-1630. https://doi.org/10.1016/j.jcsr.2009.04.004
  41. Zhao, Y.G., Lin, S.Q., Lu, Z.H., Saito, T. and He, L.S. (2018), "Loading paths of confined concrete in circular concrete loaded CFT stub columns subjected to axial compression", Eng. Struct., 156, 21-31. https://doi.org/10.1016/j.engstruct.2017.11.010

피인용 문헌

  1. Strength prediction of corrosion reinforced concrete columns strengthened with concrete filled steel tube under axial compression vol.37, pp.4, 2020, https://doi.org/10.12989/scs.2020.37.4.481
  2. Axial impact behavior of confined concrete filled square steel tubes using fiber reinforced polymer vol.38, pp.2, 2019, https://doi.org/10.12989/scs.2021.38.2.165
  3. Analysis of Carrying Capacities of Connections with Different Bolt End Distances vol.21, pp.3, 2021, https://doi.org/10.1007/s13296-021-00481-2