DOI QR코드

DOI QR Code

Direct analysis of steel frames with asymmetrical semi-rigid joints

  • Chan, Jake L.Y. (Department of Civil Engineering, The University of Hong Kong) ;
  • Lo, S.H. (Department of Civil Engineering, The University of Hong Kong)
  • 투고 : 2018.07.28
  • 심사 : 2018.09.07
  • 발행 : 2019.04.10

초록

Semi-rigid joints have been widely studied in literature in recent decades because they affect greatly the structural response of frames. In literature, the behavior of semi-rigid joints is commonly assumed to be identical under positive and negative moments which are obviously incorrect in many cases where joint details such as bolt arrangement or placement of haunch are vertically asymmetrical. This paper evaluates two common types of steel frames with asymmetrical beam-to-column joints by Direct Analysis allowing for plasticity. A refined design method of steel frames using a proposed simple forth order curved-quartic element with an integrated joint model allowing for asymmetrical geometric joint properties is presented. Furthermore, the ultimate behavior of six types of asymmetrical end-plate connections under positive and negative moment is examined by the Finite Element Method (FEM). The FEM results are further applied to the proposed design method with the curved-quartic element for Direct Analysis of two types of steel frames under dominant gravity or wind load. The ultimate frame behavior under the two different scenarios are examined with respect to their failure modes and considerably different structural performances of the frames were observed when compared with the identical frames designed with the traditional method where symmetrical joints characteristics were assumed. The finding of this research contributes to the design of steel frames as their asymmetrical beam-to-column joints lead to different frame behavior when under positive and negative moment and this aspect should be incorporated in the design and analysis of steel frames. This consideration of asymmetrical joint behavior is recommended to be highlighted in future design codes.

키워드

참고문헌

  1. ABAQUS Standard User's Manual (2014), Version 6.14, Hibbitt, Karlsson & Sorensen, Inc., RI, USA.
  2. AISC (2010), Specification for structural steel buildings; American Institute of Steel Construction, Chicago, IL, USA.
  3. Bai, L., Jiang, F. and Wang Z. (2016), "Effects of semi-rigid joints on reliability of steel frames under three-states", J. Huazhong Univ. Sci. Technol. (Nature Science Edition), 44(1).
  4. Bell, W.G., Chesson, E.J. and Munse, W.H. (1958), Static Tests of Standard Riveted and Bolted Beam-to-Column Joints, University of Illinois, Engineering Experiment Station, Urban, IL, USA.
  5. Chen, W.F. and Kishi, N. (1989), "Semi rigid steel beam-tocolumn connections: Data base and modeling", J. Struct. Eng., 115(1), 105-119. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:1(105)
  6. Daryan, A.S., Sadri, M., Saberi, H., Saberi, V. and Moghadas, A.B. (2012), "Behaviour of semi-rigid joints and semi-rigid frames", Struct. Des. Tall Special Build., 23(3), 210-238. https://doi.org/10.1002/tal.1032
  7. Davison, J.B., Kirby, P.A. and Nethercot, D.A. (1987), "Rotational stiffness characteristics of steel beam-to-column connections", J. Constr. Steel Res., 8, 17-54. https://doi.org/10.1016/0143-974X(87)90052-6
  8. Eurocode 3 (2005), Design of Steel Structure. Part 1.8: Design of Joints; European Committee for Standardization: Brussels, Belgium.
  9. Johnson, N.D. and Walpole, W.R. (1981), "Bolted End Plate Beam to Column Connections Under Earthquake Type Loading", Research Report 81-7; Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  10. Kim, S.E., Kim, M.K. and Chen, W.F. (2000), "Improved refined plastic hinge analysis accounting for strain reversal", Eng. Struct., 22(1), 15-25. DOI: 10.1016/S0141-0296(98)00079-0
  11. Kwak, H.G. and Kim, S.P. (2002), "Nonlinear analysis of RC beams based on moment-curvature relation", Comput. Struct., 80, 615-628. https://doi.org/10.1016/S0045-7949(02)00030-5
  12. Li, Z.S., Li, X.M., Zheng, X.W. and Zhang, K. (2014), "Experimental study and numerical investigation on hysteretic behaviour of T-stub semi-rigid beam-to-column joints", J. Build. Struct., 35(7), 61-68.
  13. Liew, J.Y., White, D.W. and Chen, W.F. (1993), "Second-Order Refined Plastic-Hinge Analysis for Frame Design. Part 1", J. Struct. Eng., 119(11).
  14. Liu, S.W., Bai, R. and Chan, S.L. (2016a), "Dynamic time-history elastic analysis of steel frames using one element per member", Struct. J., 8(2), 300-309. https://doi.org/10.1016/j.istruc.2016.05.006
  15. Liu, J., Peng, P. and Liu, D.L. (2016b), "Neural Network Model of Moment-rotation Relation in Semi-rigid Beam-column Joints Considering Floor Stiffness", J. Architect. Civil Eng., 33(1).
  16. Meek, J.L. and Tan, H.S. (1984), "Geometrically nonlinear analysis of space frames by an incremental-iterative technique", Comput. Methods Appl. Mech. Eng., 47, 261-282. https://doi.org/10.1016/0045-7825(84)90079-3
  17. Moore, D.B., Nethercot, D.A. and Kirby, P.A. (1993), "Testing steel frames at full scale", Struct. Engr., 71, 418-427.
  18. Nassani, D.E., Chikho, A.H. and Akgonen, A.I. (2017), "Semirigidity of cap plate and extended end plate connections", Steel Compos. Struct., Int. J., 23(5), 493-499. https://doi.org/10.12989/scs.2017.23.5.493
  19. Nguyen, P.C. and Kim, S.E. (2016), "Advanced analysis for planar steel frames with semi-rigid connections using plastic-zone method", Steel Compos. Struct., Int. J., 21(5), 1121-1144. https://doi.org/10.12989/scs.2016.21.5.1121
  20. Ostrander, J.R. (1970), "An Experimental Investigation of End-Plate Joints", Master's Thesis; University of Saskatchewan, Saskatoon, SK, Candada.
  21. Rafiee, A., Talatahari, S. and Hadidi, A. (2013), "Optimum design of steel frames with semi-rigid connections using Big Bang-Big Crunch method", Steel Compos. Struct., Int. J., 14(5), 431-451. https://doi.org/10.12989/scs.2013.14.5.431
  22. Rathbun, J.C. (1936), "Elastic properties of riveted connections", Transact. Am. Soc. Civil Engr., 101(1), 524-563. https://doi.org/10.1061/TACEAT.0004766
  23. Sagiroglu, M. and Aydin, A.C. (2013), "Design and Analysis of Steel Space Frame with Semi-Rigid Beam-to-Column Joints Using Stiffness Method", Proceedings of the 10th Pacific Structural Steel Conference, Singapore.
  24. Sagiroglu, M., Aydin, A.C. and Cuneyt, A. (2015), "Design and analysis of non-linear space frames with semi-rigid connections", Steel Compos. Struct., Int. J., 18(6), 1405-1421. https://doi.org/10.12989/scs.2015.18.6.1405
  25. SCI P358 (2011), Joints in Steel Construction: Simple Joints to Eurocode 3: 2014 Re-print ed. Ascot, UK: The Steel Construction Institute & The British Constructional Steelwork Association Limited.
  26. Sommer, W.H. (1969), "Behaviour of welded header plate joints", Master's Thesis; University of Toronto, ON, Canada.
  27. Valipour, H.R. and Bradford, M.A. (2013), "Nonlinear $P-{\Delta}$ analysis of steel frames with semi-rigid connections", Steel Compos. Struct., Int. J., 14(1), 1-20. https://doi.org/10.12989/scs.2013.14.1.001
  28. Vogel, U. (1985), "Calibrating frames", Stahlbau, 54, 295-301.
  29. Wilson, W.M. and Moore, H.F. (1917), "Tests to determine the rigidity of riveted joints of steel structures", Bulletin No. 104; Engineering Experiment Station, University of Illinois, Urbana, IL, USA.
  30. Young, C.R. and Jackson, K.B. (2011), "The relative rigidity of welded and riveted connections", Can. J. Res., 11(1), 62-100. https://doi.org/10.1139/cjr34-078
  31. Yu, C.H., Liew, J.Y., Shanmugam, N.E. and Ng, Y.H. (1998), "Collapse behaviour of sway frames with end-plate connections", J. Constr. Steel Res., 48(2-3), 61-214. https://doi.org/10.1016/S0143-974X(98)90193-6

피인용 문헌

  1. Seismic-resistant slim-floor beam-to-column joints: experimental and numerical investigations vol.37, pp.3, 2020, https://doi.org/10.12989/scs.2020.37.3.307