Fig. 1. Illustration of a PCR chip using chip resistor heater. 그림 1. 칩 저항 히터와 결합된 PCR 칩 개략도
Fig. 2. Illustration of the portable real-time microchip PCR system using chip resistors. 그림 2. 칩 저항을 이용하는 휴대형 실시간 마이크로칩 PCR 시스템 구성도.
Fig. 3. Simulation result using one chip resistor, two resistors with the distance of 1 mm, 2 mm and 3 mm, respectively. 그림 3. 저항 히터별 디자인 시뮬레이션 (a-b : 칩 저항 1 개 사용 시 온도 분포, c-d : 1 mm 간격을 갖는 칩 저항 2개 사용 시 온도 분포, e-f : 2 mm 간격을 갖는 칩 저항 2개 사용 시 온도 분포, g-h : 3 mm 간격을 갖는 칩 저항 2개 사용 시 온도 분포)
Fig. 5. Temperature sensor location for heater performance evaluation 그림 5. 히터 성능 평가를 위한 온도센서 위치
Fig. 6. (a-d) Thermocycler housing design for a cooling fan and PCR chip, (e-f) Picture of fabricated the thermocycler housing. 그림 6. Thermocycler 하우징 디자인 및 3D 프린터로 제작된 하우징(a-d : 측면, 정면, 상단, 전체 조감도, e : 하우징 사진, f : 덮개 사진)
Fig. 4. (a) Fabrication process of a heater using chip resistors for a PCR chip (b) Fabricated chip resistor heaters. 그림 4. (a) 칩 저항을 사용한 PCR 칩 히터 제작 과정 (b) 제작된 히터
Fig. 7. (a) Picture of thermocycling test setup (b-e) Thermocycling measurement result with different chip resistor heater structures. 그림 7. (a) 서모사이클링 테스트 셋업 사진 (b-e) 저항 개수 (N)와 저항 간격(D)에 따른 서모사이클 실험 결과 (b : N=1. c : N=2, D=1 mm. d : N=2, D=2 mm. e : N=2, D=3 mm)
References
- Burkhard Malorny, Panayotis T. Tassios, Peter Radstrom, Nigel Cook, Martin Wagner, Jeffrey Hoorfar, "Standardization of diagnostic PCR for the detection of foodborne pathogens," International Journal of Food Microbiology, 83, 39-48, 2003. DOI: 10.1016/S0168-1605(02)00322-7
- T. Pogfai, K. Wong-ek, S. Mongpraneet, A. Wisitsoraat "Low Cost and Portable PCR Thermoelectric Cycle," International Journal of Applied Biomedical Engineering, 1 41-45, 2008.
- H. Tsung-Min, L. Ching-Hsing, L Gwo-Bin, L. Chia-Sheng, H Fu-Chun, "A Micromachined Low-power-consumption protable PCR System," Journal of Medical and Biological Engineering, 26, 43-49, 2005.
- Roberto A. Mendoza-Gallegos, Amelia Rios, and Jose L. Garcia-Cordero, "An Affordable and Portable Thermocycler for Real-Time PCR Made of 3D-Printed Parts and Off-the-Shelf Electronics," Anal. Anal. Chem. 90(9), 5563−5568, 2018. DOI: 10.1021/acs.analchem.7b04843
- C. D. Ahrberg, B. Robert llic, A. Manz and P. Neuzil, "Handheld real-time PCR device," Lab Chip, 16, 586-592, 2016. DOI: 10.1039/c5lc01415h
- G Mulberry, K. A. White, M. Vaidya, K. Sugaya, B. N. Kim, "3D printing and milling a real-time PCR device for infectious disease diagnostics," PLOS ONE, 12(6), e0179133, 2017. DOI: 10.1371/journal.pone.0179133
- H. Tachibana, M. Saito, K. Tsuji, K. Yamanaka, L. Quynh Hoa, E. Tamiya, "Self-propelled continuousflow PCR in capillary-driven microfluidic device : Microfluidic behavior and DNA amplification," Sensors and Actuators B 206, 303-310, 2015. DOI: 10.1016/j.snb.2014.09.004
- KJ. Astrom, Tore Hagglund, PID Controllers: Theory, Design, and Tuning, Second Edition, International Society of Automation, 1995.