Fig. 1. Underground cavity restoration and reinforcement principle using concrete mat
Fig. 2. Procedure of laboratory test using Concrete mat (Continued)
Fig. 3. Results of earth pressure increment due to loading
Fig. 4. Reduction ratio of earth pressure according to reinforced depth of Concrete mat
Fig. 5. Numerical analysis verification model
Fig. 6. Numerical analysis model verification by comparing laboratory test and numerical analysis
Fig. 7. Numerical analysis results of earth pressure increment due to loading
Fig. 8. Reinforcement effect of Concrete mat by laboratory test and numerical analysis
Fig. 9. Procedure of LFWD test
Fig. 10. Results of LFWD test
Fig. 2. Procedure of laboratory test using Concrete mat
Table 1. Physical properties of soil
Table 2. Materials property
References
- ASTM (1985), Classification of soils for engineering purposes, D2487-83, West Conshohocken, PA.
- Choi, C. Y., Lee, S. H., Bae, J. H. and Park, D. H. (2011), "Evaluation of correlation between strain mudulus (Ev2) and deformation modulus (ELFWD) Using Cyclic Plate loading test and LFWD, Journal of Korean Geosynthetics Society, Vol.10 No.3, pp.33-41. https://doi.org/10.12814/JKGSS.2011.10.3.033
- Han, J. G., Kim, Y. H., You, S. K. and Chung, D. S. (2018), "Filling System Analysis for Cavity in Ground using DEM", Journal of Korea Geosyntetics Society, Vol.17, No.1, pp.119-126.
- Han, J. G., Ryu, Y. S., Kim, D., Park, J. J. and Hong, G. (2017), "A Study on Expansion and Strength characteristics of material for Emergency Restoration in Ground Cavity", Journal of Korean Geosyntetics society, Vol.16, No.2, pp.131-138.
- Hunt, R. E. (1986), Geotechnical engineering analysis and evaluation, McGraw Hill-Ryerson, 729p.
- Kang, H., Kim, K., Kim, J., Park, J. (2017), "Evaluation of strength characteristics according to expansion amount of ground reinforced expanded polyol", Journal of the Korea Society of Disaster information, Vol.13, no.1 pp.35-42. https://doi.org/10.15683/kosdi.2017.03.31.35
- Kim, J. B., You, S. K., Han, J. G., Hong, G. G. and Park, J. B. (2017), "A Study on Simulation of Cavity and Relaxation Zone Using Laboratory Model Test and Discrete Element Method", Journal of Geosynthetics Society, Vol.16, No.2, pp.11-21.
- Kim, Y., Kim, H., Kim, Y., You, S. K. and Han, J. G. (2017), "Experimental Study for Confirmation of Relaxation Zone in the Underground Cavity Expansion", Journal of Geosynthetics Society, Vol.16, No.4, pp.231-240.
- KS F 2444 (2018), Standard test method for plate bearing test on shallow foundation.
- Lee, K., Choi, B. H., Park J. and Kim, D. (2018), "Numerical Analysis and Laboratory Experiment of Rapid Restoration of Underground Cavity Using Expansive Material without Excavation", Journal of Korean Geosynthetics Society, Vol.17, No.1, pp.55-64. https://doi.org/10.12814/JKGSS.2018.17.1.055
- Lee, K., Kim, D. and Park, J. J. (2017), "Study on Management System of Ground Sinking Based on Underground Cavity Grade", Journal of Geosynthetics Society, Vol.16, No.2, pp.23-33.
- Lee, S. Y., Yoon, H. H., Son, M., Kong, J. Y. and Jung, H. S. (2018), "Controlled Low strength Material for Emergency Restoration Using Bottom Ash and Gypsum", Journal of Korean Goesynthetics Society, Vol.17, No.2, pp.19-31.
- Park, J. J., Kim, J. H., Kim, K. S., Kim, D. and Hong, G. (2018), "Evaluation on Behavior Characteristics of a Pocketable Expansion Material for Ground Cavity Based on Wheel Tracking Test Results", Journal of Geosynthetics Society, Vol.17, No.1, pp.75-83.
- You, S. K., Kim, J. B., Han, J. G., Hong, G. G., Youn, J. M. and Lee, k. I. (2017), "A Study on Simulation of Cavity and Relaxation Zone using Finite Element Method", Journal of Geosynthetics Society, Vol.16, No.4, pp.67-74.
- Yu, N. J., Choi, J. H. and Lee, K. I. (2017), "Fundamental Study on the Development of Filling Materials for Trenchless Emergency Restoration of Ground Cavity", Journal of Korean Geosynthetics Society, Vol.16, No.2, pp.97-107. https://doi.org/10.12814/jkgss.2017.16.2.097