DOI QR코드

DOI QR Code

Investigation of the bending behavior of 3D glass fabric-reinforced composite panels as slabs in buildings

  • Sabet, S.A. (Department of Civil Engineering, Islamic Azad University) ;
  • Nazari, Sh. (Department of Textile Engineering, Islamic Azad University) ;
  • Akhbari, M. (Department of Textile Engineering, Islamic Azad University) ;
  • Kolahchi, R. (Department of Civil Engineering, Islamic Azad University)
  • 투고 : 2019.01.08
  • 심사 : 2019.02.20
  • 발행 : 2019.03.25

초록

Construction industry is one of the largest markets for composite materials. Composite materials are mostly utilized as surface coatings or concrete reinforcements, and they can hardly be found as a load bearing member in buildings. The three-dimensional composite structures with considerable bending, compressive and shear strengths are capable to be used as construction load bearing members. However, these composites cannot compete with other materials due to higher manufacturing costs. If the cost issue is resolved or their excellent performance is taken into consideration to overcome disadvantages related to economic-competitive challenges, these 3D composites can significantly reduce the construction time and result in lighter and safer buildings. Sandwich composite panels reinforced with 3D woven glass fabrics are amongst composites with highest bending strength. The current study investigates the possibility of utilizing these composite materials to construct ceilings and their application as slabs. One-to-one scale experimental loading of these composite panels shows a remarkable bending strength. Simulation results using ABAQUS software, also indicate that theoretical predictions of bending behavior of these panels are in good agreement with the observed experimental results.

키워드

참고문헌

  1. Amer, I., Salman, D., Wissam, X. and Qusay, A. (2015), "Behavior and Strength of Bearing Wall Strengthening by CFRP", Int. J. Eng. Res. Technol., 4, 122-127.
  2. Belalpour Dastjerdi, P. and Ahmadi, M. (2018), "Characterizing the damage mechanisms in mode II delamination in Glass/epoxy composite using acoustic emission", Earthq. Eng., 67, 545-553.
  3. Bompard, B. (1991), "US patent", 5, 21-28.
  4. Carvelli, V., Gramellini, G., Lomov, S.V., Bogdanovich, E., Mungalov, D.D. and Verpoest, I. (2010), "Fatigue behavior of non-crimp 3D orthogonal weave and multi -layer plain weave E-glass reinforced composites", Compos. Sci. Technol., 70, 2068-2076. https://doi.org/10.1016/j.compscitech.2010.08.002
  5. Hamed, E. (2017), "Load-carrying capacity of composite precast concrete sandwich panels with diagonal fiber-reinforcedpolymer bar connectors", PCI J., 62, 34-44.
  6. Hao, W. and Chen, X. (2018), "Seismic Behavior of Glass Fiber-Reinforced Polymer Wall Panels", Compos. Struct., 203, 300-309. https://doi.org/10.1016/j.compstruct.2018.07.034
  7. Judawisastra, H., Ivens, J. and Verpoest, I. (1998), "The fatigue behaviour and damage development of 3D woven sandwich composites", Compos. Struct., 43, 35-45. https://doi.org/10.1016/S0263-8223(98)00093-2
  8. Kistaiah, N., Udaya Kiran, C. and Ramachandra Reddy, G. (2014), "Mechanical characterization of hybrid composites: A review", J. Reinfor. Plas. Compos., 33, 1364-1372. https://doi.org/10.1177/0731684413513050
  9. Mallick, P.K. (2007), "Fiber-reinforced composites: Materials, manufacturing, and design", CRC Press., 22, 581-582.
  10. Naughton, B., Panhuizen, P. and Vermeulen, A.C. (1985), "The elastic properties of chopped strand mat and woven roving in grlaminae", J. Reinfor. Plast. Compos., 42, 195-204.
  11. Niu, M.C.Y. (1992), Composite Air Frame Structures, Conmilit Press Ltd.
  12. Peled, A., Zhu, D. and Barzin, M. (2012), "Impact behavior of 3D fabric reinforced cementitious composites", RILEM Bookseries, 2, 543-550. https://doi.org/10.1007/978-94-007-2436-5_66
  13. Pourabbas Bilondi, M., Marandi, S.M. and Ghasemi, F. (2018), "Effect of recycled Glass powder on asphalt concrete modification", Earthq. Eng., 59, 373-385.
  14. Shokrieh, M.M. (2013), Proceeding book, the first composite Conference.