Earthquakes and Structures

  • 제16권3호
  • /
  • Pages.253-263
  • /
  • 2019
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh

  • 투고 : 2018.10.24
  • 심사 : 2019.01.04
  • 발행 : 2019.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The efficacy of a galvanized steel wire mesh (GSWM) as an alternative material for the rehabilitation of RC beam-column connections damaged due to reversed cyclic loading was investigated. The repair mainly uses epoxy resin infused under pressure into the damaged zone and then confined using three types of locally available GSWM mesh. The mesh types used herein are (a) Weave type square mesh with 2mm grid opening (GWSM-1) (b) Twisted wire mesh with hexagonal opening of 15 mm (GSWM-2) and (c) welded wire mesh with square opening of 25 mm (GSWM-3). A reduced scale RC beam-column connection detailed as per ductile detailing codes of Indian Standard was considered for the experimental investigation. The rehabilitated specimens were also subjected to similar cyclic displacement. Important parameters related to seismic capacity such as strength, stiffness degradation, energy dissipation, and ductility were evaluated. The rehabilitated connections exhibited equal or better performance and hence the adopted rehabilitation strategies could be considered as satisfactory. Confinement of damaged region using GSWM-1 significantly enhanced the seismic capacity of the connections.

키워드

참고문헌

  1. ACI 318-08 (2008), Building Code Requirements for Structural Concrete and Commentary.
  2. ACI 352R-02 (2002), Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, Farmington Hills, American Concrete Institute, MI.
  3. ACI Com. 546 (1996), Concrete Repair Guide, Farmington Hills, ACI.
  4. Alsayed, S.H., Al-Salloum, Y.A., Almusallam, T.H. and Siddiqui, N.A. (2010), "Seismic response of FRP-upgraded exterior RC beam-column joints", J. Compos. Constr., ASCE, 14(2), 195-208. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000067
  5. Applied Technology Council (1998), FEMA 308: Repair of Earthquake Damaged Concrete and Masonry Wall Buildings, Washington D.C., FEMA.
  6. Ascione, F., Lamberti, M., Razaqpur, A.G. and Spadea, S. (2017), "Strength and stiffness of adhesively bonded GFRP beamcolumn moment resisting connections", Compos. Struct., 60, 1248-1257.
  7. Bansal, P.P., Kumar, M. and Dar, M.A. (2016), "Retrofitting of exterior RC beam-column joints using ferrocement jackets", Earthq. Struct., 10(2), 313-328. https://doi.org/10.12989/eas.2016.10.2.313
  8. Bentayeb, F., Tahar, K.A. and Chateauneuf, A. (2008), "New technique for reinforcement of concrete columns confined by embedded composite grid", Constr. Buld. Mater., 22, 1624-1633. https://doi.org/10.1016/j.conbuildmat.2007.06.015
  9. Chidambaram, R.S. and Agarwal, P. (2014), "The confining effect of geo-grid on the mechanical properties of concrete specimens with steel fiber under compression and flexure", Constr. Build. Mater., 71, 628-637. https://doi.org/10.1016/j.conbuildmat.2014.08.059
  10. Choi, J.H. (2008), "Seismic retrofit of reinforced concrete circular columns using stainless steel wire mesh composite", Can. J. Civil Eng., 35(2), 140-147. https://doi.org/10.1139/L07-079
  11. Corazao, M. and Durrani, A.J. (1989), "Repair and strengthening of beam-to-column connections subjected to earthquake loading", Technical Report NCEER-89-0013, National Center for Earthquake Engineering Research, State University of New York at Buffalo, N.Y.
  12. Engindeniz, M., Kahn, L.F. and Zureick, A. (2005), "Repair and strengthening of reinforced concrete beam- column joints: State of the art", ACI Struct. J., 102(2), 187-197.
  13. Esfahani, M.R., Kianoush, M.R. and Tajari, A.R. (2007), "Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets", Eng. Struct., 29(10), 2428-2444. https://doi.org/10.1016/j.engstruct.2006.12.008
  14. Eslami, A. and Ronagh, H.R. (2014), "Experimental investigation of an appropriate anchorage system for flange-bonded carbon fiber-reinforced polymers in retrofitted RC beam-column joints", J. Compos. Constr., 18(4), 1-11.
  15. Federal Emergency Management Agency (FEMA-308) (1998), Repair of Earthquake Damaged Concrete and Masonry Wall Buildings, 24-42.
  16. Filiatrault, A. and Lebrun, I. (1996), "Seismic rehabilitation of reinforced concrete joints by epoxy pressure injection technique", Spec. Publ., 160, 73-92.
  17. Ghobarah, A. and Said, A. (2002), "Shear strengthening of beamcolumn joints", Eng. Struct., 24(7), 881-888. https://doi.org/10.1016/S0141-0296(02)00026-3
  18. Ghobarah, A., Aziz, A. and Biddah, T.S. (1997), "Rehabilitation of reinforced concrete frame connections using corrugated steel jacketing", ACI Struct. J., 4(3), 283-294.
  19. Hadi, M.N.S. and Tran, T.M. (2016), "Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites", Mater. Struct., 49(1-2), 467-485. https://doi.org/10.1617/s11527-014-0511-4
  20. IS 10262 (2009), "Guidelines for concrete mix design proportioning (CED 2: Cement and Concrete)", Bureau of Indian Standard New Delhi.
  21. IS 13311: Part 1(1992), Non-destructive Testing of Concrete: Part 1 Ultrasonic Pulse Velocity, Bureau of Indian Standard, New Delhi.
  22. IS 13920 (2016), Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces-Code of Practice, Bureau of Indian Standard, New Delhi.
  23. IS 1608 (1995), Mechanical Testing of Metals-Tensile Testing, Bureau of Indian Standard, New Delhi.
  24. IS 432 1 (1982), Specification for Mild Steel and Medium Tensile Steel Bars and Hard-drawn Steel Wire for Concrete Reinforcement: Part I Mild Steel and Medium Tensile Steel Bars, Bureau of Indian Standard, New Delhi.
  25. IS 456 (2000), Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standard, New Delhi.
  26. Kakaletsis, D.J., David, K.N. and Karayannis, C.G. (2011), "Effectiveness of some conventional seismic retrofitting techniques for bare and infilled R/C frame", J. Struct. Eng. Mech., 39(4), 499-520. https://doi.org/10.12989/sem.2011.39.4.499
  27. Karayannis, C.G. and Sirkelis, G.M. (2002), "Effectiveness of RC beam-column connection strengthening using Carbon-FRP Jackets", 12th European Conference on Earthquake Engineering, London, Paper No. 546.
  28. Karayannis, C.G. and Sirkelis, G.M. (2008), "Strengthening and rehabilitation of RC beam-column joints using C-FRP jacketing and epoxy resin injection", J. Earthq. Eng. Struct. Dyn., 37, 769-790. https://doi.org/10.1002/eqe.785
  29. Karayannis, C.G., Chalioris, C.E. and Sideris, K.K. (1998), "Effectiveness of RC beam-column connection repair using epoxy resin injections", J. Earthq. Eng., 2(2), 217-240. https://doi.org/10.1080/13632469809350320
  30. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of exterior RC beam-column joints using thin RC jackets-An experimental study", Earthq. Eng. Struct. Dyn., 37, 727-746. https://doi.org/10.1002/eqe.783
  31. Kumar, V. and Patel, P.V. (2016), "Strengthening of axially loaded circular concrete columns using stainless steel wire mesh (SSWM)-Experimental investigations", Constr. Build. Mater., 124, 186-198. https://doi.org/10.1016/j.conbuildmat.2016.06.109
  32. Li, B., Lam, E.S., Wu, B. and Wang, Y. (2015), "Seismic behavior of reinforced concrete exterior beam-column joints strengthened by ferrocement composites", Earthq. Struct., 9(1), 233-256. https://doi.org/10.12989/eas.2015.9.1.233
  33. Marthong, C., Dutta, A. and Deb, S.K. (2013), "Seismic rehabilitation of RC exterior beam-column connections using epoxy resin injection", J. Earthq. Eng., 17(3), 378-398. https://doi.org/10.1080/13632469.2012.738284
  34. Mosallam, A.S. (2000), "Strength and ductility of reinforced concrete moment frame connections strengthened with quasi-Isotropic laminates", Compos. Part B-Eng., 31(6-7), 481-497. https://doi.org/10.1016/S1359-8368(99)00068-2
  35. Mukherjee, A. and Joshi, M. (2005), "FRPC reinforced concrete beam-column joints under cyclic excitation", Compos. Struct., 70, 185-199. https://doi.org/10.1016/j.compstruct.2004.08.022
  36. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures from Theory to Practice, John willey & sons, inc.
  37. Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  38. Patel, P.V., Raiyani, S.D. and Shah, P.J. (2018), "Torsional strengthening of RC beams using stainless steel wire mesh - Experimental and numerical study", Struct. Eng. Mech., 67(4), 391-401. https://doi.org/10.12989/sem.2018.67.4.391
  39. Saleh, H.A., Al-Salloum, A.Y., Almusallam, T.H. and Nadeem, A.S. (2010), "Seismic response of FRP-upgraded exterior beamcolumn joints", J. Compos. Constr., ASCE, 14(2), 195-208. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000067
  40. Shannag, M.J. and Alhassan, M.A. (2005), "Seismic upgrade of interior beam-column sub-assemblages with high performance fiber reinforced concrete jackets", ACI Struct. J., 102(1), 131-138.
  41. Silva, M.F.A. and Haach, V.G. (2016), "Parametrical study of the behavior of exterior unreinforced concrete beam-column joints through numerical modeling", Comput. Concrete, 18(2), 215-233. https://doi.org/10.12989/cac.2016.18.2.215
  42. Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002), FRPStrengthened RC Structures, John Wiley & Sons, Ltd.
  43. Tsai, A. (1992), "Effective repair with resin for bond failure of RC members", Proceedings of the 10th World Conference of Earthquake Engineering, 5211-5216.
  44. Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets and RCjackets in post-earthquake and pre-earthquake retrofitting of beam-column sub-assemblages", Eng. Struct., 30, 777-793. https://doi.org/10.1016/j.engstruct.2007.05.008
  45. Tsonos, A.G. (2010), "Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing", Eng. Struct., 32, 726-740. https://doi.org/10.1016/j.engstruct.2009.12.001
  46. Tsonos, A.G. (2014), "An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method", Struct. Monit. Mainten., 1(3), 323-338. https://doi.org/10.12989/SMM.2014.1.3.323
  47. Tsonos, A.G. and Papanikolaou, K.V. (2003), "Post-earthquake repair and strengthening of RC beam column connections (theoretical & experimental investigation)", Bull. NZ Soc. Earthq. Eng., 36(2), 73-79.
  48. Vidjeapriya, R. and Jaya, K.P. (2013), "Experimental study on two simple mechanical precast beam-column connections under reverse cyclic loading", J. Perform. Constr. Facil., 27(4), 402-414. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000324
  49. William, M.S. and Sexsmith, R.G. (1995), "Seismic damage indices for concrete structures: a state-of-the-art review", Earthq. Spectra, 11(2), 319-349. https://doi.org/10.1193/1.1585817

피인용 문헌

  1. Behaviour of RC beam-column joint with varying location of construction joints in the column vol.20, pp.1, 2021, https://doi.org/10.12989/eas.2021.20.1.029
  2. Behaviour of RC beam-column joint with varying location of construction joints in the column vol.20, pp.1, 2021, https://doi.org/10.12989/eas.2021.20.1.029
  3. Behaviour of repaired RC beam-column joints using welded wire mesh and jacketed with polymer modified mortar vol.21, pp.1, 2019, https://doi.org/10.12989/eas.2021.21.1.079