DOI QR코드

DOI QR Code

Utilization of Kota stone slurry powder and accelerators in concrete

  • Devi, Kiran (Civil Engineering Department, National Institute of Technology) ;
  • Saini, Babita (Civil Engineering Department, National Institute of Technology) ;
  • Aggarwal, Paratibha (Civil Engineering Department, National Institute of Technology)
  • 투고 : 2018.06.30
  • 심사 : 2019.03.05
  • 발행 : 2019.03.25

초록

Recent advances in the concrete technology are aiding in minimizing the use of conventional materials by substituting by-products of various industries and energy sources. A large amount of stone waste i.e., dust and slurry form both are being originated during natural stone processing and causing deadily effects on the environment. The disposal problem of stone waste can be resolved effectively by using waste in construction industries. In present work, Kota stone slurry powder, as a substitution of cement was used along with accelerators namely calcium nitrate and triethanolamine as additives, to study their impact on various properties of the concrete mixtures. Kota stone slurry powder (7.5%), calcium nitrate (1%) and triethanolamine (0.05%) were used separately as well in combination in different concrete mixtures. Mechanical Strength, modulus of elasticity and electrical resistivity of concrete specimens of different mix proportions under water curing were studied experimentally. The durability properties in terms of strength and electrical resistivity against sulphate and chloride solution attack at various curing ages were also studied experimentally. Results showed that accelerators and Kota stone slurry powder separately enhanced the mechanical strength and electrical resistivity; but, their combination decreased strength at all curing ages. The durability of concrete specimens was also affected under the exposure to chemical attack too. Kota stone slurry powder found to be the most effective material among all materials. Material characterization was also done to study the microstructural properties.

키워드

참고문헌

  1. Aggoun, S., Cheikh-Zouaoui, M., Chikh, N. and Duval, R. (2006), "Effect of some admixtures on the setting time and strength evolution of cement paste at early ages", Constr. Build. Mater., 22(2), 106-110. https://doi.org/10.1016/j.conbuildmat.2006.05.043
  2. Al-Akhras, N.M., Ababneh, A. and Alaraji, W.A. (2010), "Using burnt stone slurry in mortar mixes", Constr. Build. Mater., 24, 2658-2663. https://doi.org/10.1016/j.conbuildmat.2010.04.058
  3. Ali, S.I., Kumar, R. and Yadav, M.K. (2018), "An experimental investigation on concrete containing ground granulated blast furnace slag and Kota stone powder slurry", Int. Res. J. Eng. Technol., 5(4), 2382-2384.
  4. Almeida, N., Branco, F. and Santos, J.R. (2007a), "Recycling of stone slurry in industrial activities: Application to concrete mixtures", Build. Environ., 42(2), 810-819. https://doi.org/10.1016/j.buildenv.2005.09.018
  5. Almeida, N., Branco, F., de Brito, J. and Santos, J.R. (2007b), "High-performance concrete with recycled stone slurry", Cement Concrete Res., 37(2), 210-220. https://doi.org/10.1016/j.cemconres.2006.11.003
  6. Alnahhal, M.F., Alengaram, U.J., Jumaat, M.Z., Alsubari, B., Alqedra, M.A. and Mo, K.H. (2018), "Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and nontraditional supplementary cementitious materials", Constr. Build. Mater., 163, 482-495. https://doi.org/10.1016/j.conbuildmat.2017.12.106
  7. Alyamac, K.E. and Aydin, A.B. (2015), "Concrete properties containing fine aggregate marble powder", KSCE J. Civil Eng., 19(7), 2208-2216. https://doi.org/10.1007/s12205-015-0327-y
  8. Ashish, D.K. (2018), "Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth", J. Build. Eng., 15, 236-242. https://doi.org/10.1016/j.jobe.2017.11.024
  9. Ashish, D.K., Verma, S.K., Kumar, R. and Sharma, N. (2016), "Properties of concrete incorporating sand and cement with waste marble powder", Adv. Concrete Constr., 4(2), 145-160. https://doi.org/10.12989/acc.2016.4.2.145
  10. ASTM C1012/C1012M-12 (2012), Standard Test Method for Length Change of Hydraulic-cement Mortars Exposed to a Sulphate Solution, ASTM International, West Conshohocken, U.S.A
  11. Broomfield, J.P. (2007), Corrosion of Steel in Concrete, 2nd edition, Taylor & Francis, New York.
  12. Chikh, N., Cheikh-Zouaoui, M., Aggoun, S. and Duval, R. (2008), "Effects of calcium nitrate and triisopropanolamine on the setting and strength evolution of Portland cement pastes", Mater. Struct., 41(1), 31-36. https://doi.org/10.1617/s11527-006-9215-8
  13. Chouhan, H.S., Kalla, P., Nagar, R. and Gautam, P.K. (2018), "Partial replacement of cement by Kota stone slurry in mortar", Recent Trend. Civil Eng. Technol., 7(3), 8-13.
  14. Devi, K., Acharya, K.G. and Saini, B. (2019b), "Significance of stone slurry powder in normal and high strength concrete", Springer Nature Switzerland AG 2019, Ludhiana, India, November.
  15. Devi, K., Saini, B. and Aggarwal, P. (2018), "Effect of accelerators with waste material on the properties of cement paste and mortar", Comput. Concrete, 22, 153-159. https://doi.org/10.12989/CAC.2018.22.2.153
  16. Devi, K., Saini, B. and Aggarwal, P. (2019a), "Combined use of accelerators and stone slurry powder in cement mortar", Springer Nature Switzerland AG 2019, Ludhiana, India, November.
  17. El-Hassan, H. and Ismail, N. (2017), "Effect of process parameters on the performance of fly ash/GGBS blended geopolymer composites", J. Sustain. Cement Bas. Mater., 7(2), 122-140. https://doi.org/10.1080/21650373.2017.1411296
  18. Ergun, A. (2011), "Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete", Constr. Build. Mater., 25, 806-812. https://doi.org/10.1016/j.conbuildmat.2010.07.002
  19. Gok, S.G. and Kilinc, K. (2015), "Effect of calcium nitrate, triethanolamine and triisopropanolamine on compressive strength of mortars", J. Eng. Sci., 1, 12-19.
  20. Gulsan, M.E., Mohammedameen, A., Sahmaran, M., Nis, A., Alzeebaree, R. and Cevik, A. (2018), "Effects of sulphuric acid on mechanical and durability properties of ECC confined by FRP fabrics", Adv. Concrete Constr., 6(2), 199-220. https://doi.org/10.12989/ACC.2018.6.2.199
  21. Han, J., Wang, K., Shi, J. and Wang, Y. (2015), "Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics", Constr. Build. Mater., 93, 457-462. https://doi.org/10.1016/j.conbuildmat.2015.06.018
  22. Heren, Z. and Olmez, H., (1996), "The influence of ethanolamines on the hydration and mechanical properties of portland cement", Cement Concrete Res., 26(5), 701-705. https://doi.org/10.1016/S0008-8846(96)85007-1
  23. Huang, H., Shen, X. and Zheng, J. (2010), "Modeling, analysis of interaction effects of several chemical additives on the strength development of silicate cement", Constr. Build. Mater., 24, 1937-1943. https://doi.org/10.1016/j.conbuildmat.2010.04.007
  24. Hussain, A. (2015), "Kota stone slurry problem and possible solutions".
  25. IS 10262 (2009), Concrete Mix Proportioning -Guidelines, Bureau of Indian Standard, New Delhi, India.
  26. IS 1199 (1959), Methods of sampling and Analysis of Concrete, Bureau of Indian Standard, New Delhi, India.
  27. IS 13311 (1992) (Part-1), Non-destructive testing of concrete-Methods of test, Bureau of Indian Standard, New Delhi, India.
  28. IS 383 (1963), Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standard, New Delhi, India.
  29. IS 516 (1959), Methods of Tests for Strength of Concrete, Bureau of Indian Standard, New Delhi, India.
  30. IS 8112 (1989), Specification for 43-grade ordinary Portland cement, Bureau of Indian Standard, New Delhi, India.
  31. Jain, A. and Majumder, R. (2016), "Strength, Permeability and Carbonation properties of Concrete containing Kota Stone Slurry", SSRG Int. J. Civil Eng., 3(6), 1-8. https://doi.org/10.14445/23488352/IJCE-V3I6P101
  32. Joshaghani, A., Moeini, M.A. and Balapour, M. (2017a), "Evaluation of incorporating metakaolin to evaluate durability and mechanical properties of concrete", Adv. Concrete Constr., 5(3), 241-255. https://doi.org/10.12989/acc.2017.5.3.241
  33. Joshaghani, A., Moeini, M.A., Balapour, M. and Moazenian, A. (2017b), "Effects of supplementary cementitious materials on mechanical and durability properties of high-performance nonshrinking grout (HPNSG)", J. Sustain. Cement Bas. Mater., 7, 38-56. https://doi.org/10.1080/21650373.2017.1372318
  34. Kabeer, K.S., Ahmed, V. and Ashok, K. (2018), "Utilization of marble powder as fine aggregate in mortar mixes", Constr. Build. Mater., 165, 321-332. https://doi.org/10.1016/j.conbuildmat.2018.01.061
  35. Khodabakhshian, A., de Brito, J., Ghalehnovi, M. and Shamsabadi, E.A. (2018), "Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder", Constr. Build. Mater., 169, 237-251. https://doi.org/10.1016/j.conbuildmat.2018.02.192
  36. Kong, X.M., Lu Z.B., Liu, H. and Wang, D.M. (2013), "Influence of triethanolamine on the hydration and the strength development of cementitious systems", Mag. Concrete Res., 65(18), 1101-1109. https://doi.org/10.1680/macr.13.00015
  37. Kumar, R., Lakhani, R. and Tomar, P. (2017), "A simple novel mix design method and properties assessment of foamed concretes with limestone slurry waste", J. Clean. Prod., 171, 1650-1663. https://doi.org/10.1016/j.jclepro.2017.10.073
  38. Manca, P.P., Orru, G. and Desogus, P. (2015), "Recycling of sludge from ornamental stone processing as resource in civil constructions", Int. J. Min. Reclam. Environ., 29(2), 141-155. https://doi.org/10.1080/17480930.2014.959730
  39. Marmol, I., Ballester, P., Cerro, S., Monros, G., Morales, J. and Sanchez, L. (2010), "Use of granite sludge wastes for the production of coloured cement-based mortars", Cement Concrete Compos., 32, 617-622. https://doi.org/10.1016/j.cemconcomp.2010.06.003
  40. Meena, Y.K., Meena, D., Chaudhary, P. and Sharma, A. (2018), "Partial replacement of fine aggregate with Kota stone dust & fly ash in cement mortar", 2nd International Conference on New Frontiers of Engineering, Management, Social Science and Humanities, 96-102.
  41. Mohammed, M.K., Dawson, A.R. and Thom, N.H. (2013), "Production, microstructure and hydration of sustainable selfcompacting concrete with different types of filler", Constr. Build. Mater., 49, 84-92. https://doi.org/10.1016/j.conbuildmat.2013.07.107
  42. Mostofinejad, D., Nosouhian, F. and Nazari-Monfared, H. (2016), "Influence of magnesium sulphate concentration on durability of concrete containing micro-silica, slag and limestone powder using durability index", Constr. Build. Mater., 117, 107-120. https://doi.org/10.1016/j.conbuildmat.2016.04.091
  43. Nas, M. and Kurbetcia, S. (2018), "Durability properties of concrete containing metakaolin", Adv. Concrete Constr., 6(2), 159-175. https://doi.org/10.12989/ACC.2018.6.2.159
  44. Neville, A.M. and Brooks, J.J. (1997), Concrete Technology, 2nd Edition, Longman Publishing Limited, England.
  45. Odd, E.G. (2016), "Durability design and sustainability of new major concrete infrastructure", J. Sustain. Cement Bas. Mater., 5(5), 269-282. https://doi.org/10.1080/21650373.2016.1169231
  46. Opiso, E.M., Sato, T. and Otake, T. (2017), "Microstructural properties of hardened cement paste blended with coal fly ash, sugar mill lime sludge and rice hull ash", Adva. Concrete Constr., 5(3), 289-301. https://doi.org/10.12989/ACC.2017.5.3.289
  47. Paliwal, G. and Maru, S. (2017), "Effect of fly ash and plastic waste on mechanical and durability properties of concrete", Adva. Concrete Constr., 5(6), 575-586. https://doi.org/10.12989/ACC.2017.5.6.575
  48. Parveen, S.D. and Jindal, B.B. (2017), "Experimental study on geopolymer concrete prepared using high-silica RHA incorporating alccofine", Adva. Concrete Constr., 5(4), 345-358. https://doi.org/10.12989/ACC.2017.5.4.345
  49. Pillai, C.S., Santhakumar, A.R., Poonguzhali, A., Pujar, M.G., Kumar, J.A., Preetha, R. and Mudali, U.K. (2016), "Evaluation of microstructural and microchemical aspects of high density concrete exposed to sustained elevated temperature", Constr. Build. Mater., 126, 453-465 https://doi.org/10.1016/j.conbuildmat.2016.09.053
  50. Rakhimova, N.R. and Rakhimov, R.Z. (2014), "A review on alkali-activated slag cements incorporated with supplementary materials", J. Sustain. Cement Bas. Mater., 3(1), 61-74. https://doi.org/10.1080/21650373.2013.876944
  51. Ramachandran, V.S. (1976), "Hydration of cement-Role of Triethanolamine", Cement Concrete Res., 6, 623-632. https://doi.org/10.1016/0008-8846(76)90026-0
  52. Rana, A., Kalla, P. and Csetenyi, L.J. (2015), "Sustainable use of marble slurry in concrete", J. Clean. Prod., 94, 304-311. https://doi.org/10.1016/j.jclepro.2015.01.053
  53. Rana, A., Kalla, P. and Csetenyi, L.J. (2017), "Recycling of dimension limestone industry waste in concrete", Int. J. Min. Reclam. Environ., 31, 231-250. https://doi.org/10.1080/17480930.2016.1138571
  54. Rana, A., Kalla, P., Verma, H.K. and Mohnot. J.K. (2016), "Recycling of dimensional stone waste in concrete: A review", J. Clean. Prod., 135, 312-331. https://doi.org/10.1016/j.jclepro.2016.06.126
  55. Rosskopf, P.A., Linton, F.J. and Peppier, R.B. (1975), "Effect of various accelerating chemical admixtures on setting and strength development of concrete", J. Test. Eval., 3(4), 322-330. https://doi.org/10.1520/JTE10662J
  56. Sadrmomtazi, A., Tahmouresi, B. and Amooie, M. (2017), "Permeability and mechanical properties of binary and ternary cementitious mixtures", Adv. Concrete Constr., 5(5), 423-436. https://doi.org/10.12989/acc.2017.5.5.423
  57. Sharma, S.K., Ransinchung, G.D. and Kumar, P. (2018), "Investigating the use of wollastonite micro fiber in yielding SCC", Adv. Concrete Constr., 6(2), 123-143. https://doi.org/10.12989/ACC.2018.6.2.123
  58. Silva, P. and de Brito, J. (2013), "Electrical resistivity and capillarity of self-compacting concrete with incorporation of fly ash and limestone filler", Adv. Concrete Constr., 1(1), 65-84. https://doi.org/10.12989/acc.2013.1.1.065
  59. Singh, H., Garg, P. and Kaur, I. (2019), Proceedings of the 1st International Conference on Sustainable Waste Management Through Design: IC_SWMD 2018, Vol. 21, Springer.
  60. Singh, M., Srivastava, A. and Bhunia, D. (2017a), "Evaluation of marble slurry incorporated concrete using non destructive methods", Mater. Today: Proc., 4, 9842-9845. https://doi.org/10.1016/j.matpr.2017.06.278
  61. Singh, M., Srivastava, A. and Bhunia, D. (2017b), "An investigation on effect of partial replacement of cement by waste marble slurry", Constr. Build. Mater., 134, 471-488. https://doi.org/10.1016/j.conbuildmat.2016.12.155
  62. Temiz, H. and Kantarci, F. (2014), "Investigation of durability of CEM II B-M mortars and concrete with limestone powder, calcite powder and fly ash", Constr. Build. Mater., 68, 517-524. https://doi.org/10.1016/j.conbuildmat.2014.06.078
  63. Vijayalakshmi M., Sekar A.S.S. and Ganesh Prabhu, G. (2013), "Strength and durability properties of concrete made with granite industry waste", Constr. Build. Mater., 46, 1-7. https://doi.org/10.1016/j.conbuildmat.2013.04.018
  64. Xiao, L., Li, Z. and Wei, X. (2007), "Selection of superplasticizer in concrete mix design by measuring the early electrical resistivities of pastes", Cement Concrete Compos., 29, 350-356. https://doi.org/10.1016/j.cemconcomp.2006.12.015
  65. Yaphary, Y.L., Yu, Z., Lam, R.H.W. and Lau, D. (2017), "Effect of triethanolamine on cement hydration toward initial setting time", Constr. Build. Mater., 141, 94-103. https://doi.org/10.1016/j.conbuildmat.2017.02.072
  66. Zeidan, M., Bassuoni, M.T. and Said, A. (2016), "Physical salt attack on concrete incorporating nano-silica", J. Sustain. Cement Bas. Mater., 6(3), 195-216. https://doi.org/10.1080/21650373.2016.1218802
  67. Zongjin, L. (2011), Advanced Concrete Technology, John Wiley & Sons, Inc, Hoboken, New Jersey.