DOI QR코드

DOI QR Code

Effect of high temperature on the bond performance between steel bars and recycled aggregate concrete

  • Yan, Lan-Lan (Faculty of Science, East China University of Technology) ;
  • Liang, Jiong-Feng (Faculty of Civil & Architecture Engineering, East China University of Technology) ;
  • Zhao, Yan-gang (Department of Architecture, Kanagawa University)
  • 투고 : 2018.08.17
  • 심사 : 2019.03.05
  • 발행 : 2019.03.25

초록

The use of recycled aggregate concrete for the purpose of environmental and resource conservation has gained increasing interest in construction engineering. Nevertheless, few studies have reported on the bonding performance of the bars in recycled aggregate concrete after exposed to high temperatures. In this paper, 72 pull-out specimens and 36 cubic specimens with different recycled coarse aggregate content (i.e., 0%, 50%,100%) were cast to evaluate the bond behavior between recycled aggregate concrete and steel bar after various temperatures ($20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$). The results show that the recycled aggregate concrete pull-out specimens exhibited similar bond stress-slip curves at both ambient and high temperature. The bond strength declined gradually with the increase of the temperature. On the basis of a regression analysis of the experimental data, a revised bond strength mode and peak slip ratios relationship model were proposed to predict the post-heating bond-slip behavior between recycled aggregate concrete and steel bar.

키워드

과제정보

연구 과제 주관 기관 : Chinese National Natural Science Foundation

참고문헌

  1. ACI Committee 318, Building Code for Structural Concrete (318R-2008) and Commentary (318R-2008) (2008), American Concrete Institute, Farmington Hills, MI.
  2. Al-Jahdali, F.A, Wafa, F.F. and Shihata, S.A. (1994), "Development length for straight deformed bars in highstrength concrete", ACI S.P., 149, 507-522.
  3. AS3600, Australian Standard for Concrete Structures (1994), North Sydney, Australia.
  4. Breccolotti, M. and Materazzi, A.L. (2013), "Structural reliability of bonding between steel rebars and recycled aggregate concrete", Constr. Build. Mater., 47, 927-934. https://doi.org/10.1016/j.conbuildmat.2013.05.017
  5. Bui, N.K., Satomi, T. and Takahashi, H. (2018), "Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature", Constr. Build. Mater., 184, 361-373. https://doi.org/10.1016/j.conbuildmat.2018.06.237
  6. Chapman, R.A. and Shah, S.P. (1987), "Early-age bond strength in reinforced concrete", ACI Mater. J., 84(6), 501-510.
  7. Chen, G.M., He, Y.H., Yang, H., Chen, J.F. and Guo, Y.C. (2014), "Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures", Constr. Build. Mater., 111(15), 363-378.
  8. CSA CAN3-A23.3, Design of Concrete Structures (2004), Canadian Standards Association, Rexdale, Ontario, Canada.
  9. Dan, S., Chaudhary, M. and Barai, S.V. (2018), "Punching shear behavior of recycled aggregate concrete", Comput Concrete, 21(3), 321-333. https://doi.org/10.12989/CAC.2018.21.3.321
  10. Edwards, A.D. and Yannopoulos, P.J. (1997), "Local bond-stress to slip relationships for hot rolled deformed bars and mid steel plain bars", ACI J., 76(3), 405-419.
  11. European Committee for Standardization, Eurocode 2 (EC2) (2004), Design of Concrete Structures.
  12. Fib (CEB-FIP) (2012), Model Code 2010-Final draft, Vol.1, Fib Bulletin No. 65, International Federa-tion for Structural Concrete (fib), Lausanne, Switzerland.
  13. Kemp, E.L. (1986), "Bond in reinforced concrete: Behavior and design criteria", ACI J., 83(7), 50-57.
  14. Kim, S.W. and Yun, H.D. (2014), "Evaluation of the bond behavior of steel reinforcing bars in recycled fine aggregate concrete", Cement Concrete Compos., 46, 8-18. https://doi.org/10.1016/j.cemconcomp.2013.10.013
  15. Laneyrie, C., Beaucour, A.L., Green, M.F., Hebert, R.L., Ledesert, B. and Noumowe, A. (2016), "Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures", Constr. Build. Mater., 111(15), 363-378.
  16. Liang, J.F., Wang, E., Zhou, X. and Le, Q.L. (2018), "Influence of high temperature on mechanical properties of concrete containing recycled fine aggregate", Comput. Concrete, 21(1), 87-94. https://doi.org/10.12989/CAC.2018.21.1.087
  17. Liang, J.F., Yang, Z.P., Yi, P.H. and Wang, J.B. (2017), "Stressstrain relationship for recycled aggregate concrete after exposure to elevated temperatures", Comput. Concrete., 19(6), 609-615.
  18. NZS3101 (2006), New Zealand Concrete Structures Standards.
  19. Orangun, C.O, Jirsa, I.O. and Breen, J.E. (1977), "A reevaluation of test data on development length and splices", ACI J., 74(3), 114-122.
  20. Shang, H.S., Cui, F.K., Zhang, P., Zhao, T.J. and Ren, G.S. (2017), "Bond behavior of steel bar embedded in recycled coarse aggregate concrete under lateral compression load", Constr. Build. Mater., 150, 529-537. https://doi.org/10.1016/j.conbuildmat.2017.05.060
  21. Shatarat, N.K., Katkhuda, H.N., Hyari, K.H. and Asi, I. (2018), "Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete", Struct. Eng. Mech., 67(3), 283-290. https://doi.org/10.12989/SEM.2018.67.3.283
  22. Standard Methods for Testing of Concrete Structures (GB50152) (1992), Chinese Building Construction Publishing Press, Beijing. (in Chinese)
  23. Thomas, J., Thaickavil, N.N. and Wilson, P.M. (2018), "Strength and durability of concrete containing recycled concrete aggregates", J. Build. Eng., 19, 349-365. https://doi.org/10.1016/j.jobe.2018.05.007
  24. Xuan, D.X., Zhan, B.J. and Poon, C.S. (2016), "Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates", Cement Concrete Compos., 65, 67-74. https://doi.org/10.1016/j.cemconcomp.2015.10.018
  25. Yang, H.F., Qin, Y.H., Liao, Y. and Chen, W. (2016), "Shear behavior of recycled aggregate concrete after exposure to high temperatures", Constr. Build. Mater., 106, 374-381. https://doi.org/10.1016/j.conbuildmat.2015.12.103
  26. Zhao, Y.X., Zeng, W.L. and Zhang, H.R. (2017), "Properties of recycled aggregate concrete with different water control methods", Constr. Build. Mater., 151, 539-546.

피인용 문헌

  1. Residual Properties and Axial Bearing Capacity of Steel Reinforced Recycled Aggregate Concrete Column Exposed to Elevated Temperatures vol.7, 2019, https://doi.org/10.3389/fmats.2020.00187
  2. Flexural strength of concrete-galvalume composite beam under elevated temperatures vol.27, pp.1, 2019, https://doi.org/10.12989/cac.2021.27.1.013