DOI QR코드

DOI QR Code

Evaluation of performance and seismic parameters of eccentrically braced frames equipped with dual vertical links

  • Mohsenian, Vahid (Department of Civil Engineering, University of Science and Culture) ;
  • Nikkhoo, Ali (Department of Civil Engineering, University of Science and Culture)
  • 투고 : 2018.06.14
  • 심사 : 2019.01.28
  • 발행 : 2019.03.25

초록

Investigations on seismic performance of eccentrically braced frames equipped with dual vertical links have received little attention. Therefore, the main goal of this paper is to describe design steps for such frames and evaluate nonlinear performance of this system according to the reliability analysis. In this study, four and eight story frame structures are analyzed and the response modification factors for different intensity and damage levels are derived in a matrix form based on a new approach. According to the obtained results, the system has high ductility and acceptable seismic performance. Moreover, it is concluded that using response modification factor equal to 8 in the design of system provides desirable seismic reliability under the design and maximum probable hazard levels. Due to desirable performance and significant advantages of the dual vertical links, this system can be used as a main lateral load bearing system, in addition to its application for rehabilitation of damaged structures.

키워드

참고문헌

  1. ABAQUS (2014), Version 6.14, ABAQUS User's Manual, SIMULIA World Headquarters, U.S.A.
  2. Ang, A.H.S. and Tang, W.H. (2007), Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering, 2nd Edition, Wiley, University of Michigan, U.S.A.
  3. ASCE/SEI Standard 41-13 (2014), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  4. ATC (1995a), Structural Response Modification Factors, ATC-19 Report, Applied Technology Council, Redwood City, California, U.S.A.
  5. ATC (1996), Seismic Evaluation of Concrete Buildings, Vol. 1, ATC-40, Applied Technology Council, Redwood, California, U.S.A.
  6. Baradaran, M.R., Hamzezarghani, F., RastegariGhiri, M. and Mirsanjari, Z. (2015), "The effect of vertical shear-link in improving the seismic performance of structures with eccentrically bracing systems", Int. J. Civil Environ. Eng., 9(8), 1078-1082.
  7. Bathaei, A. and Zahrai, S.M. (2017), "Investigation of the effects of vertical link beam length on steel structures residual displacement", Modar. Civil Eng. J., 17(3), 47-60.
  8. Beheshti-Aval, S.B., Mohsenian, V. and SadeghKouhestani, H. (2018), "Seismic performance-based assessment of tunnel form buildings subjected to near- and far-fault ground motions", Asian J. Civil Eng., 19(1), 79-92. https://doi.org/10.1007/s42107-018-0009-4
  9. Bertro, V.V. (1989), "Evaluation of response reduction factors recommended by ATC and SEAOC", Proceedings of the 3rd U.S. National Conference on Earthquake Engineering, South Carolina, U.S.A.
  10. Bouwkamp, J., Vetr, M.G. and Ghamari, A. (2016), "An analytical model for inelastic cyclic response of eccentrically braced frame with vertical shear link (V-EBF)", Case Stud. Struct. Eng., 6, 31-44. https://doi.org/10.1016/j.csse.2016.05.002
  11. Cimellaro, G.P., Reinhorn, A.M., Bruneau, M. and Rutenberg, A. (2006), Multi-Dimensional Fragility of Structures: Formulation and Evaluation, Multidisciplinary Center for Earthquake Engineering Research, MCEER-06-0002.
  12. Computers and Structures, Inc. (CSI) (2015), Structural and Earthquake Engineering Software, ETABS, Extended Three Dimensional Analysis of Building Systems Nonlinear, Version 15.2.2, Berkeley, California, U.S.A.
  13. Computers and Structures, Inc. (CSI) (2016), Structural and Earthquake Engineering Software, PERFORM-3D Nonlinear Analysis and Performance Assessment for 3-D Structures, Version 6.0.0, Berkeley, California, U.S.A.
  14. Duan, L. and Su, M. (2017), "Seismic testing of high-strength steel eccentrically braced frames with a vertical link", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 170(11), 874-882. https://doi.org/10.1680/jstbu.16.00100
  15. Fajfar, P. (2000), "A nonlinear analysis method for performance based seismic design", Earthq. Spectr., 116(3), 573-592. https://doi.org/10.1193/1.1586128
  16. Fanaie, N. and AfsarDizaj, E. (2014) "Response modification factor of the frames braced with reduced yielding segment BRB", Struct. Eng. Mech., 50(1), 1-17. https://doi.org/10.12989/sem.2014.50.1.001
  17. Hancock, J., Watson-Lampre, J., Abrahamson, N.A., Bommer, J.J., Markatis, A., McCoy, E. and Mendis, R. (2006) "An improved method of matching response spectra of recorded earthquake ground motion using wavelets", J. Earthq. Eng., 10(spec01), 67-89. https://doi.org/10.1080/13632460609350629
  18. Institute of National Building Regulations (2008), Design and Construction of Steel Structures, Topic 10, Ministry of Roads & Urban Development, Iran.
  19. Lia, S.P. and Biggs, J.M. (1980), "Inelastic response spectra for seismic building design", J. Struct. Div., 106(ST6), 1295-1310. https://doi.org/10.1061/JSDEAG.0005449
  20. Lian, M. and Su, M. (2017), "Seismic performance of highstrength steel fabricated eccentrically braced frame with vertical shear link", J. Constr. Steel Res., 137, 262-285. https://doi.org/10.1016/j.jcsr.2017.06.022
  21. Massah, S.R. and Dorvar, H. (2014), "Design and analysis of eccentrically braced steel frames with vertical links using shape memory alloys", Smart Mater. Struct., 23(11), 115015. https://doi.org/10.1088/0964-1726/23/11/115015
  22. Miranda, E. (1991), "Seismic evaluation & upgrading of existing buildings", Ph.D. Dissertation, University of California, Berkeley, U.S.A.
  23. Moghaddam, H. and KaramiMohammadi, R. (2001), "Ductility reduction factor of MDOF shear-building structures", J. Struct. Eng., 5(3), 425-440.
  24. Mohsenian, V. and Mortezaei, A. (2018a), "Evaluation of seismic reliability and multi level response reduction factor (R factor) for eccentric braced frames with vertical links", Earthq. Struct., 14(6), 537-549. https://doi.org/10.12989/EAS.2018.14.6.537
  25. Mohsenian, V. and Mortezaei, A. (2018b), "A new energyabsorbing system for seismic retrofitting of frame structures with slender braces", Bullet. Earthq. Eng., Accepted.
  26. Mwafy, A.M. and Elnashai, A.S. (2002), "Calibration of force reduction factors of RC buildings", J. Earthq. Eng., 6(2), 239-273. https://doi.org/10.1080/13632460209350416
  27. PEER Ground Motion Database, Pacific Earthquake Engineering Research Center.
  28. Permanent Committee for Revising the Standard 2800 (2014), Iranian Code of Practice for Seismic Resistant Design of Buildings, 4th Edition, Building and Housing Research Center, Tehran, Iran.
  29. Rahnavard, R., Hassanipour, A., Suleiman, M. and Mokhtati, A. (2017), "Evaluation on eccentrically braced frame with single and double shear panels", J. Build. Eng., 10, 13-25. https://doi.org/10.1016/j.jobe.2017.01.006
  30. Daryan, S.A., Bahrampoor, H., Ziaei, M., Golafshar, A. and Assareh, M.A. (2008), "Seismic behavior of vertical shear links made of easy-going steel", Am. J. Eng. Appl. Sci., 1(4), 368-377. https://doi.org/10.3844/ajeassp.2008.368.377
  31. Sabouri-Ghomi, S. and Saadati, B. (2014), "Numerical modeling of links behavior in eccentric bracings with dual vertical links", Numer. Meth. Civil Eng., 1(1), 14-20.
  32. Santa-Ana, P.A. (2004), "Estimation of strength reduction factors for elastoplastic structures: Modification factors", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, May.
  33. Seki, M., Katsumata, H., Uchida, H. and Takeda, T. (1988), "Study on earthquake response of two-storied steel frame with Y-shaped braces", Proceedings 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  34. Shayanfar, M., Rezaeian, A. and Taherkhani, S. (2008), "Assessment of the seismic behavior of eccentrically braced frame with double vertical link (DV-EBF)", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  35. Shayanfar, M.A., Barkhordari, M.A. and Rezaeian, A.R. (2011), "Experimental study of cyclic behavior of composite vertical link in eccentrically braced frames", Steel Compos. Struct., 12(1), 13-29. https://doi.org/10.12989/scs.2012.12.1.013
  36. Shome, N. and Cornell, C.A. (1999), Probabilistic Seismic Demand Analysis of Nonlinear Structures, Reliability of Marine Structures Report No: RMS-35, Civil and Environmental Engineering, Stanford University, U.S.A.
  37. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  38. Vetr, M.G., Ghamari, A. and Bouwkamp, J. (2017), "Investigating the nonlinear behavior of eccentrically braced frame with vertical shear links (V-EBF)", J. Build. Eng., 10, 47-59. https://doi.org/10.1016/j.jobe.2017.02.002
  39. Whittaker, A., Hart, G. and Rojahn, C. (1999) "Seismic response modification factors", J. Struct. Eng., 125(4), 438-444. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(438)
  40. Zahrai, S.M. and Mahroozadeh, Y. (2010), "Experimental study of using vertical link beam to improve seismic performance of steel buildings", J. Civil Survey. Eng., 44(3), 379-393.
  41. Zahrai, S.M. and MoslehiTabar, A. (2013), "Analytical study on cyclic behavior of chevron braced frames with shear panel system considering post-yield deformation", Can. J. Civil Eng., 40(7), 633-643. https://doi.org/10.1139/cjce-2012-0430
  42. Zahrai, S.M. and Parsa, A. (2015), "Effect of flange width of vertical link beam on cyclic behavior of chevron braced Steel frames", J. Seismol. Earthq. Eng., 17(4), 281-292.
  43. Zareian, F., Krawinkler, H., Ibarra, L. and Lignos, D. (2010), "Basic concepts and performance measures in prediction of collapse of buildings under earthquake ground motions", Struct. Des. Tall Spec. Build., 19(1-2), 167-181. https://doi.org/10.1002/tal.546