DOI QR코드

DOI QR Code

Numerical modelling of bottom-hole rock in underbalanced drilling using thermo-poroelastoplasticity model

  • Liu, Weiji (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Zhou, Yunlai (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Zhu, Xiaohua (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Meng, Xiannan (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Liu, Mei (Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University) ;
  • Wahab, Magd Abdel (Division of Computational Mechanics, Ton Duc Thang University)
  • 투고 : 2018.06.22
  • 심사 : 2019.01.25
  • 발행 : 2019.03.10

초록

Stress analysis of bottom-hole rock has to be considered with much care to further understand rock fragmentation mechanism and high penetration rate. This original study establishes a fully coupled simulation model and explores the effects of overburden pressure, horizontal in-situ stresses, drilling mud pressure, pore pressure and temperature on the stress distribution in bottom-hole rock. The research finds that in air drilling, as the well depth increases, the more easily the bottom-hole rock is to be broken. Moreover, the mud pressure has a great effect on the bottom-hole rock. The bigger the mud pressure is, the more difficult to break the bottom-hole rock is. Furthermore, the maximum principal stress of the bottom-hole increases as the mud pressure, well depth and temperature difference increase. The bottom-hole rock can be divided into three main regions according to the stress state, namely a) three directions tensile area, b) two directions compression areas and c) three directions compression area, which are classified as a) easy, b) normal and c) hard, respectively, for the corresponding fragmentation degree of difficulty. The main contribution of this paper is that it presents for the first time a thorough study of the effect of related factors, including stress distribution and temperature, on the bottom-hole rock fracture rather than the well wall, using a thermo-poroelastoplasticity model.

키워드

과제정보

연구 과제 주관 기관 : China Postdoctoral Science Foundation, National Natural Science Foundation of China

참고문헌

  1. Amadi, W.K. and Iyalla, I. (2012), "Application of mechanical specific energy techniques in reducing drilling cost in deepwater development", Proceedings of the SPE Deepwater Drilling and Completions Conference, Galveston, Texas, U.S.A., June.
  2. Aminul, I.M., Skalle, P. and Benjamin, P. (2009b), "Analytical and numerical study of consolidation effect on time delayed borehole stability during underbalanced drilling in shale", Proceedings of the Kuwait International Petroleum Conference and Exhibition, Kuwait City, Kuwait, December.
  3. Aminul, I.M., Skalle, P. and Evgeniy, T. (2009a), "Underbalanced drilling in shale-perspective of factors influences mechanical borehole instability", Proceedings of the International Petroleum Technology Conference.
  4. Azeemuddinet, M., Maya, D.A. and Guzman, E. (2006), "Underbalanced drilling borehole stability evaluation and implementation in depleted reservoirs", Proceedings of the IADCSPE Drilling Conference, Miami, Florida, U.S.A., February.
  5. Bezminabadi, S.N., Ramezanzadeh, A., Jalali, S.M.E., Tokhmechi, B. and Roustaei, A. (2017), "Effect of rock properties on ROP modeling using statistical and intelligent methods: A case study of an oil well in Southwest of Iran", Arch. Min. Sci., 62(1), 131-144. https://doi.org/10.1515/amsc-2017-0010
  6. Bradley, W.B. (1979), "Failure of inclined boreholes", J. Energy Res. Technol., 101(4), 232-239. https://doi.org/10.1115/1.3446925
  7. Chang, D., Li, G., Shen, Z., Huang, Z., Tian, S., Shi, H. and Song, X. (2014), "A study on the effect of bottom-hole differential pressure on the rock stress field", Part A: Recov. Utilizat. Environ. Eff., 36(3), 275-283. https://doi.org/10.1080/15567036.2010.538808
  8. Dias, D. and Grippon, J. (2017), "Numerical modelling of a pilesupported embankment using variable inertia piles", Struct. Eng. Mech., 61(2), 245-253. https://doi.org/10.12989/sem.2017.61.2.245
  9. He, S., Wang, W., Tang, M., Hu, B. and Xue, W. (2014), "Effects of fluid seepage on wellbore stability of horizontal wells drilled underbalanced", J. Nat. Gas Sci. Eng., 21, 338-347. https://doi.org/10.1016/j.jngse.2014.08.016
  10. Li, G., Chang, D., Shen, Z., Huang, Z., Tian, S., Shi, H. and Song, X. (2016), "Study of the bottom-hole rock stress field under water jet impact", Energy Sources, Part A: Recov. Utilizat. Environ. Eff., 38(2), 164-173. https://doi.org/10.1080/15567036.2010.531509
  11. Li, J., Guo, B., Yang, S. and Liu, G. (2014), "The complexity of thermal effect on rock failure in gas-drilling shale-gas wells", J. Nat. Gas Sci. Eng., 21, 255-259. https://doi.org/10.1016/j.jngse.2014.08.011
  12. Li, X.B., Dou, T.W. and Dong, D.R. (2011), "Stress state of bottom hole rocks in underbalanced drilling", Acta Petrolel Sinic., 32, 329-334. https://doi.org/10.1038/aps.2010.209
  13. Liu, W., Qian, X., Li, T., Zhou, Y. and Zhu, X. (2019), "Investigation of the tool-rock interaction using Drucker-Prager failure criterion", J. Petrol. Sci. Eng., 173, 269-278. https://doi.org/10.1016/j.petrol.2018.09.064
  14. Liu, W., Zhu, X. and Jing, J. (2018), "The analysis of ductilebrittle failure mode transition in rock cutting", J. Petrol. Sci. Eng., 163, 311-319. https://doi.org/10.1016/j.petrol.2017.12.067
  15. Lusso, C., Ern, A., Bouchut, F., Mangeney, A., Farin, M. and Roche, O. (2017), "Two-dimensional simulation by regularization of free surface viscoplastic flows with druckerprager yield stress and application to granular collapse", J. Comput. Phys., 333, 387-408. https://doi.org/10.1016/j.jcp.2016.12.036
  16. McLellan, P. and Hawkes, C. (2001), "Borehole stability analysis for underbalanced drilling", J. Can. Petrol. Technol., 4031-4038.
  17. Nguyen, V.P., Lian, H., Rabczuk, T. and Bordas, S. (2017), "Modelling hydraulic fractures in porous media using flow cohesive interface elements", Eng. Geol., 225, 68-82. https://doi.org/10.1016/j.enggeo.2017.04.010
  18. Qiu, K.B., Gherryo, Y. and Marsden, R. (2008), "Underbalanced drilling of a horizontal well in depleted reservoir: A wellborestability perspective", Proceedings of the SPE Middle East Oil and Gas Show and Conference, Manama, Bahrain, March.
  19. Rabczuk, T. and Ren, H.A. (2017), "A peridynamics formulation for quasi-static fracture and contact in rock", Eng. Geol., 225, 42-48. https://doi.org/10.1016/j.enggeo.2017.05.001
  20. Roshan, H. and Rahman, S.S. (2011), "3D borehole model for evaluation of wellbore instabilities in underbalanced drilling", Proceedings of the SPE EUROPEC/EAGE Annual Conference and Exhibition, Vienna, Austria, May.
  21. Rumzan, I. and Schmitt D.R. (2001), "The influence of well bore fluid pressure on drilling penetration rates and stress dependent strength", Rock Mech. Nat. Inter., 1, 911-917.
  22. Salehi, S. and Hareland, G. (2007), "Wellbore stability analysis in UBD wells of Iranian fields", Proceedings of the 1st EAGE International Petroleum Conference and Exhibition, Shiraz, Iran, May.
  23. Salehi, S., Hareland, G. and Nygaard, R. (2010), "Numerical simulations of wellbore stability in under-balanced-drilling wells", J. Petrol. Sci. Eng., 72, 229-235. https://doi.org/10.1016/j.petrol.2010.03.022
  24. Sarfarazi, V. and Haeri, H. (2018), "Three-dimensional numerical modeling of effect of bedding layer on the tensile failure behavior in hollow disc models using particle flow code (PFC3D)", Struct. Eng. Mech., 68(5), 537-547. https://doi.org/10.12989/sem.2018.68.5.537
  25. Sarfarazi, V., Haeri, H., Shemirani, A.B. and Nezamabadi, M.F. (2018), "A fracture mechanics simulation of the pre-holed concrete Brazilian discs", Struct. Eng. Mech., 66(3), 343-351. https://doi.org/10.12989/SEM.2018.66.3.343
  26. Shirkavand, F., Hareland, G. and Aadnoy, B.S. (2009), "Rock mechanical modelling for a underbalanced drilling rate of oenetration prediction", Proceedings of the 43rd Conference on US Rock Mechanics Symposium and the 4th Conference on USCanada Rock Mechanics Symposium, Sheville, North Carolina, U.S.A., June-July.
  27. Zhang, H., Wan, Z., Wang, C., Ma, Z., Zhang, Y. and Cheng, J. (2017), "A statistical damage constitutive model for geomaterials under plane-strain biaxial stress state", Adv. Math. Phys.
  28. Zhang, H., Gao, D., Salehi, S. and Guo, B. (2013), "Effect of fluid temperature on rock failure in borehole drilling", J. Eng. Mech., 140(1), 82-90. https://doi.org/10.1061/(asce)em.1943-7889.0000648
  29. Zhang, H., Zhang, H., Guo, B. and Gang, M. (2012), "Analytical and numerical modeling reveals the mechanism of rock failure in gas UBD", J. Nat. Gas Sci. Eng., 4, 29-34. https://doi.org/10.1016/j.jngse.2011.09.002
  30. Zhao, H.L., Liu, X., Bao, Y.H. and Yuan, Y. (2017), "Nonlinear simulation of tunnel linings with a simplified numerical modelling", Struct. Eng. Mech., 61(5), 593-603. https://doi.org/10.12989/sem.2017.61.5.593
  31. Zhou, S., Zhuang, X. and Rabczuk, T. (2018b), "A phase-field modeling approach of fracture propagation in poroelastic media", Eng. Geol., 240, 189-203. https://doi.org/10.1016/j.enggeo.2018.04.008
  32. Zhou, S., Zhuang, X., Zhu, H. and Rabczuk, T. (2018a), "Phase field modelling of crack propagation, branching and coalescence in rocks", Theoret. Appl. Fract. Mech., 96, 174-192. https://doi.org/10.1016/j.tafmec.2018.04.011
  33. Zhu, X., Liu, W. and Zheng, H. (2016), "A fully coupled thermoporoelastoplasticity analysis of wellbore stability", Geomech. Eng., 10(4), 437-454. https://doi.org/10.12989/gae.2016.10.4.437
  34. Zhu, X.H., Liu, W.J. and Liu, Q.Y. (2014), "The mechanism and law of wellbore instability due to drill string impact in air drilling", Int. J. Oil Gas Coal Technol., 8(2), 153-181. https://doi.org/10.1504/IJOGCT.2014.064843
  35. Zhuang, X., Huang, R., Liang, C. and Rabczuk, T. (2014), "A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage", Math. Probl. Eng.
  36. Zhuang, Z. (2009), Finite Element Analysis and Application Based on ABAQUS, Tsinghua University Press.