References
- David, L. G., "Swirl Flows in Combustion: A Reviews," AIAA Journal, Vol. 15, No. 8, 1977, pp. 1063-1078. https://doi.org/10.2514/3.60756
- Liu, Y., Sun, X., Sethi, V., Nalianda, D., Li, Y. G., and Wang, L., "Review of Modern Low Emissions Combustion Technologies for Aero Gas Turbine Engines," Progress in Aerospace Sciences 94 2017, pp.12-45. https://doi.org/10.1016/j.paerosci.2017.08.001
- Schmidt, D. P., Nouar, I, Senecal, P. K., Rutland, C. J., Martin, J. K., Reitz, R. D., and Hoffman, J. A., "Pressure-Swirl Atomization in the Near Field," SAE Technical papers, March 1999.
- Senecal, P. K., Schmidt, D. P., Nouar, I., Rutland, C. J., Reitz, R. D., and Corradini, M. L., "Modeling High-speed Viscous Liquid Sheet Atomization," International Journal of Multiphase Flow, Vol. 25, 1999, pp.1073-1097. https://doi.org/10.1016/S0301-9322(99)00057-9
- Stiesch, G., "Modeling Engine Spray and Combustion Processes," Heat and Mass Transfer.
- O'Rourke, P. J., and Amsden, A. A., "The TAB Method for Numerical Calculation of Spray Droplet Breakup," SAE Technical papers, 1987.
- Park, J. H., Hwang, S. S., and Yoon, Y. B., "Aerodynamically Progressed Taylor Analogy Breakup (APTAB) Model for Accurate Prediction of Spray Droplet Deformation and Breakup," Journal of ILASS-Korea, Vol. 5, No. 2, 2000, pp.53-60.
- Shim, Y. S., Choi, G. M., and Kim, D. J., "Development and Validation of a new Hybrid Break-up Model for the modeling of Hollow-cone Fuel Spray," Proceeding of the Institution of Mech., Part D: J. Automobile Engineering, Vol. 222, No. 2, 2008, pp.275-284. https://doi.org/10.1243/09544070JAUTO421
- Yoo, K. H., Kim, J. C., and Sumg, H. G., "Effects of Cooling Flow on the Flow Structure and Acoustic Oscillation in a Swirl-stabilzed Combustor. Part I: Flow Characteristics," Journal of Visualization, Vol. 16, 2013, pp.287-295. https://doi.org/10.1007/s12650-013-0177-y
- Yoo, Y. L., Han, D. H., Hong, J. S., and Sung, H. G., "A Large Eddy Simulation of the Breakup and Atomization of a Liquid Jet into a Cross Turbulent Flow at Various Spray Conditions," International Journal of Heat and Mass Transfer, Vol. 112, 2017, pp.97-112. https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.064
- Kim, L., Hong, J. S., Jeong, W. C., Yoo, K. H., Kim, J. C., and Sung, H. G., "Turbulent Combustion Characteristics of a Swirl Injector in a Gas Turbine Annular Combustor Using LES and Level-set Flamelet," Journal of Korean Society of Propulsion Engineers, Vol. 18, No. 2, pp.1-9. https://doi.org/10.6108/KSPE.2014.18.2.001
- Kim, J. C., Jung, W. C., Hong, J. S., and Sung H. G., "The Effects of Turbulent Burning Velocity Models in a Swirl-Stabilized Lean Premixed Combustor," International Journal of Turbo & Jet-Engines, Vol. 35, No. 4, pp.365-372. https://doi.org/10.1515/tjj-2016-0053
- Germano, M., Piomelli, U., Moin, P., and Cabot, W. H., "A Dynamic Sub-scale Eddy Viscosity Model," Physics of Fluids, Vol. 3, No. 7, 1991, pp.1760-1765. https://doi.org/10.1063/1.857955
- Heo, J. Y., Hong, J. S., and Sung, H. G., "Effect of Dynamics SGS Model in a Kerosene-LOx Swirl Injector under Supercritical Condition," International Journal of Aeronautical and Space Science, Vol. 16, No. 2, pp.254-263. https://doi.org/10.5139/IJASS.2015.16.2.254
- Abramzon, B., and Sirignano, W. A., "Droplet Vaporization Model for Spray Combustion Calculations," International Journal of Heat Mass Transfer, Vol. 32, No. 9, 1989, pp.1605-1618. https://doi.org/10.1016/0017-9310(89)90043-4
- Cai, J., Jeng, S. M., and Tacina, R., "The Structure of a Swirl-Stabilized Reacting Spray Issued from an Axial Swirler," AIAA 2005-1424.
- Patel, N., Kirtas, M., Sankaran, V., and Menon, S., "Simulation of Spray Combustion in a Lean-direct Injection Combustor," Proceeding of the Combustion Institude, Vol. 31, No. 2, 2007, pp. 2327-2334. https://doi.org/10.1016/j.proci.2006.07.232
- Apte, S. V., Mahesh, K., Moin, P., and Oefelein, J. C., "Large-eddy Simulation of Swirling Particle-laden Flows in a Coaxial-jet Combustor," International Journal of Multiphase Flow, Vol. 29, No. 8, 2003. pp.1311-1331. https://doi.org/10.1016/S0301-9322(03)00104-6