한국섬유공학회지 (Textile Science and Engineering)

  • 제56권1호
  • /
  • Pages.8-14
  • /
  • 2019
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

롤러 공정으로 제조된 3D 프린팅 레이스/보일 복합직물의 인장강도 및 강연도 특성

Tensile Properties and Stiffnesses of 3D-printed Lace/Voile Composite Fabrics Manufactured by Various Roller Processes

  • 이선희 (동아대학교 패션디자인학과)
  • Lee, Sunhee (Department of Fashion Design, Dong-A University)
  • 투고 : 2018.12.01
  • 심사 : 2019.01.29
  • 발행 : 2019.02.28
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study was to develop lace-style 3D printed textiles using thermoplastic polyurethane filaments for 3D printing by fused deposition modeling. Composite voile textiles with lace motifs of different sizes were produced by various roller press processes. The textiles were characterized according to their tensile behaviors, tensile characteristics, and stiffnesses. The analysis of tensile characteristics revealed that the 3dLaceM1 textile with a big pattern had a maximum load of 13.2 kgf and an elongation of 274.3%. Moreover, as the size of the lace motif decreased, the maximum load value tended to decrease, while the elongation value tended to increase. The composite 3D-printed lace/voile textile (3dLaceM1/voile), which was produced by a roller press, had a maximum load of 35.4 kgf and an elongation of 383.9%. The initial modulus of 3dLaceM1/voile was $20.56kgf/mm^2$, which was more than six times that of the 3D-printed lace textile that was produced by the roller press process. The stiffness of the 3D-printed lace textile tended to decrease with the size of the lace motif. In addition, the 3D-printed lace that was produced with the roller press process exhibited more flexible characteristics. Furthermore, the stiffness of the composite 3D-printed lace/voile textile was higher than that of the conventional 3D-printed lace textile. Thus, the tensile characteristics and stiffnesses of textiles could be customized for specific uses through process control of the 3D-printed lace.

키워드

참고문헌

  1. R. Melnikova, A. Ehrmann, and K. Finsterbusch, "3D Printing of Textile-based Structures by Fused Deposition Modelling (FDM) with Different Polymer Materials", Mater. Sci. Eng., 2014, 62, 1-6. https://doi.org/10.1016/0025-5416(84)90260-X
  2. L. Sabantina, F. Kinzel, A. Ehrmann, and K. Finsterbusch, "Combining 3D Printed Forms with Textile Structures - Mechanical and Geometrical Properties of Multi-material Systems", Mater. Sci. Eng., 2015, 87, 1-5. https://doi.org/10.1016/j.mser.2014.10.001
  3. E. Pei, J. Shen, and J. Watling, "Direct 3D printing of Polymers onto Textiles: Experimental Studies and Applications", Rapid Prototyping J., 2015, 21, 556-571. https://doi.org/10.1108/RPJ-09-2014-0126
  4. S. H. Lee, "Morphology and Properties of Textiles Manufactured by 3-Dimensional Printing Based on Fused Deposition Modeling", Text. Sci. Eng., 2015, 52, 272-279. https://doi.org/10.12772/TSE.2015.52.272
  5. G. Choi and S. Kim, "Adaptive Modeling Method for 3-D Printing with Various Polymer Materials", Fiber. Polym., 2016, 17, 977-983. https://doi.org/10.1007/s12221-016-6225-1
  6. R. H. Sanatgar, C. Campagne, and V. Nierstrasz, "Investigation of the Adhesion Properties of Direct 3D Printing of Polymers and Nanocomposites on Textiles: Effect of FDM Printing Process Parameters", Appl. Surface Sci., 2017, 403, 551-563. https://doi.org/10.1016/j.apsusc.2017.01.112
  7. A. Narula, C. M. Pastore, D. Schmelzeisen, S. E. Basri, J. Schenk, and S. Shajoo, "Effect of Knit and Print Parameters on Peel Strength of Hybrid 3-D Printed Textiles", J. Text. Fibrous Mater., 2018, 1, 1-10.
  8. S. Lee, "Evaluation of Mechanical Properties and Washability of 3D Printed Lace/Voil Composite Fabrics Manufactured by FDM 3D Printing Technology", Fashion & Text. Res. J., 2018, 20, 353-359. https://doi.org/10.5805/SFTI.2018.20.3.353