DOI QR코드

DOI QR Code

Snap back testing of unbonded post-tensioned concrete wall systems

  • Twigden, Kimberley M. (Aurecon) ;
  • Henry, Richard S. (Department of Civil and Environmental Engineering, University of Auckland)
  • 투고 : 2018.04.28
  • 심사 : 2019.01.16
  • 발행 : 2019.02.25

초록

Unbonded Post-Tensioned (UPT) precast concrete systems have been shown to provide excellent seismic resistance. In order to improve understanding of the dynamic response of UPT systems, a series of snap back tests on four UPT systems was undertaken consisting of one Single Rocking Wall (SRW) and three Precast Wall with End Columns (PreWEC) systems. The snap back tests provided both a static pushover and a nonlinear free vibration response of a system. As expected the SRW exhibited an approximate bi-linear inertia force-drift response during the free vibration decay and the PreWEC walls showed an inertia force-drift response with increased strength and energy dissipation due to the addition of steel O-connectors. All walls exhibited negligible residual drifts regardless of the number of O-connectors or the post-tensioning force. When PreWEC systems of the same strength were compared the inclusion of further energy dissipating O-connectors was found to decrease the measured peak wall acceleration. Both the local and global wall parameters measured at pseudo-static and dynamic loading rates showed similar behaviour, which demonstrates that the dynamic behaviour of UPT walls is well represented by pseudo-static tests. The SRW was found to have Equivalent Viscous Damping (EVD) between 0.9-3.8% and the three PreWEC walls were found to have maximum EVD of between 14.7-25.8%.

키워드

과제정보

연구 과제 주관 기관 : University of Auckland Engineering

참고문헌

  1. Aaleti, S. and Sritharan, S. (2009), "A simplified analysis method for characterizing unbonded post-tensioned precast wall systems", Eng. Struct., 31(12), 2966-2975. https://doi.org/10.1016/j.engstruct.2009.07.024
  2. Abramson, D. (2013), "Comprehensive evaluation of multistrand post-tensioning anchorage systems for seismic resilient rocking wall structures", Master of Science, The University of Minnesota.
  3. Belleri, A., Schoettler, M.J., Restrepo, J.I. and Fleischman, R.B. (2014), "Dynamic behavior of rocking and hybrid cantilever walls in a precast concrete building", ACI Struct. J., 111(3), 661-671. https://doi.org/10.14359/51686778
  4. Chopra, A.K. (2007), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, NJ.
  5. Galusha, J.G. (1999), "Precast, post-tensioned concrete walls designed to rock", M.S.C.E. Thesis, University of Washington.
  6. Henry, R.S., Aaleti, S., Sritharan, S. and Ingham, J.M. (2010), "Concept and finite-element modeling of new steel shear connectors for self-centering wall Systems", J. Eng. Mech., 136(2), 220-229. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000071
  7. Henry, R.S., Brooke, N.J., Sritharan, S. and Ingham, J.M. (2012), "Defining concrete compressive strain in unbonded posttensioned walls", ACI Struct. J., 109(1), 101-112.
  8. Henry, R.S., Sritharan, S. and Ingham, J.M. (2016), "Finite element analysis of the PreWEC self-centering concrete wall system", Eng. Struct., 115, 28-41. https://doi.org/10.1016/j.engstruct.2016.02.029
  9. Henry, R.S., Sritharan, S. and Ingham, J.M. (2016), "Residual drift analyses of realistic self-centering concrete wall systems", Earthq. Struct., 10(2), 409-428. https://doi.org/10.12989/eas.2016.10.2.409
  10. Holden, T., Restrepo, J. and Mander, J.B. (2003), "Seismic performance of precast reinforced and prestressed concrete walls", J. Struct. Eng., 129(3), 286-296. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(286)
  11. Kurama, Y. (2002), "Hybrid post-tensioned precast concrete walls for use in seismic regions", PCI J., 47(5), 36-59. https://doi.org/10.15554/pcij.09012002.36.59
  12. Kurama, Y.C., Sritharan, S., Fleischman, R.B., Restrepo, J.I., Henry, R.S., Cleland, N.M., Ghosh, S.K. and Bonelli, P. (2018), "Seismic-resistant precast concrete structures: State of the art", J. Struct. Eng., 144(4), 03118001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001972
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Marriott, D. (2009), "The development of high-performance posttensioned rocking systems for the seismic design of structures", Doctor of Philosophy, PhD Thesis, University of Canterbury, Christchurch.
  15. Marriott, D., Pampanin, S., Bull, D. and Palermo, A. (2008), "Dynamic testing of precast, post-tensioned rocking wall systems with alternative dissipating solutions", Bull. NZ Soc. Earthq. Eng., 41(2), 90-103.
  16. Nagae, T., Matsumori, T., Shiohara, H., Kabeyasawa, T., Kono, S., Nishiyama, M., Moehle, J., Wallace, J., Sause, R. and Ghannoum, W. (2014), "The 2010 E-defense shaking table test on four-story reinforced concrete and post-tensioned concrete buildings", Proceedings of the NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering.
  17. Nazari, M., Sritharan, S. and Aaleti, S. (2017), "Single precast concrete rocking walls as earthquake force-resisting elements", Earthq. Eng. Struct. Dyn., 46(5), 753-769. https://doi.org/10.1002/eqe.2829
  18. NZS 3101:2006 (2006), Concrete Structures Standard, Standards New Zealand, Wellington, New Zealand.
  19. Perez, F.J., Pessiki, S. and Sause, R. (2013), "Experimental lateral load response of unbonded post-tensioned precast concrete walls", ACI Struct. J., 110(6), 1045-1055.
  20. Priestley, M.J.N., Sritharan, S.S., Conley, J.R. and Pampanin, S. (1999), "Preliminary results and conclusions from the PRESSS five-story precast concrete test building", PCI J., 44(6), 42-67. https://doi.org/10.15554/pcij.11011999.42.67
  21. Sritharan, S., Aaleti, S. and Thomas, D.J. (2007), "Seismic analysis and design of precast concrete jointed wall systems", ISU-ERI-Ames Report ERI-07404, Department of Civil, Construction and Environmental Engineering, Iowa State University, Ames, IA.
  22. Sritharan, S., Aaleti, S., Henry, R.S., Liu, K.Y. and Tsai, K.C. (2015), "Precast concrete wall with end columns (PreWEC) for earthquake resistant design", Earthq. Eng. Struct. Dyn., 44(12), 2075-2092. https://doi.org/10.1002/eqe.2576
  23. Twigden, K.M. (2015), "Dynamic response of unbonded posttensioned rocking walls", Doctor of Philosophy, PhD Thesis, University of Auckland, Auckland.
  24. Twigden, K.M. and Henry, R.S. (2015), "Experimental response and design of O-connectors for rocking wall systems", Struct., 3, 261-271. https://doi.org/10.1016/j.istruc.2015.06.002
  25. Twigden, K.M., Sritharan, S. and Henry, R.S. (2017), "Cyclic testing of unbonded post-tensioned concrete wall systems with and without supplemental damping", Eng. Struct., 140, 406-420. https://doi.org/10.1016/j.engstruct.2017.02.008
  26. Walsh, K.Q. and Kurama, Y.C. (2010), "Behavior of unbonded post-tensioning monostrand anchorage systems under monotonic tensile loading", PCI J., 55(1), 97-117. https://doi.org/10.15554/pcij.01012010.97.117
  27. Wight, G.D., Ingham, J.M. and Kowalsky, M.J. (2006), "Shaketable testing of rectangular post-tensioned concrete masonry walls", ACI Struct. J., 103(4), 587-595.