DOI QR코드

DOI QR Code

Improving the hysteretic behavior of Concentrically Braced Frame (CBF) by a proposed shear damper

  • Ghamari, Ali (Department of Civil Engineering, Sharif University of Technology) ;
  • Haeri, Hadi (MOE Key Laboratory of Deep Underground Science and Engineering, School of Architecture and Environment, Sichuan University) ;
  • Khaloo, Alireza (Department of Civil Engineering, Sharif University of Technology) ;
  • Zhu, Zheming (MOE Key Laboratory of Deep Underground Science and Engineering, School of Architecture and Environment, Sichuan University)
  • 투고 : 2018.10.13
  • 심사 : 2019.02.23
  • 발행 : 2019.02.25

초록

Passive steel dampers have shown favorable performance in last earthquakes, numerical and experimental studies. Although steel dampers are more affordable than other types of damper, they are not economically justified for ordinary buildings. Therefore, in this paper, an innovative steel damper with shear yielding mechanism is introduced, which is easy to fabricate also can be easily replaced after sever earthquakes. The main goal of implementing such a mechanism is to control the possible damage in the damper and to ensure the elastic behavior of other structural components. The numerical results indicate an enhancement of the hysteretic behavior of the concentrically braced frames utilizing the proposed damper. The proposed damper change brittle behavior of brace due to buckling to ductile behavior due to shear yielding in proposed damper. The necessary relations for the design of this damper have been presented. In addition, a model has been presented to estimate load-displacement of the damper without needing to finite element modeling.

키워드

참고문헌

  1. AISC, ANSI/AISC 341-16 (2016), Seismic provisions for structural steel buildings; American Institute of Steel Construction, Chicago, IL, USA.
  2. Akrami, V. and Erfani, S. (2015), "Effect of local web buckling on the cyclic behavior of Reduced web BeamSections (RWBS)", Steel Compos. Struct., Int. J., 18(3), 641-657. https://doi.org/10.12989/scs.2015.18.3.641
  3. Averseng, J., Bouchair, A. and Chateauneuf, A. (2017), "Reliability analysis of the nonlinear behaviour of stainless steel cover- plate joints", Steel Compos. Struct., Int. J., 25(1), 41-55.
  4. Bouwkamp, J., Vetr, M.G. and Ghamari, A. (2016), "An analytical model for inelastic cyclic response of eccentrically braced frame with vertical shear link (V-EBF)", Case Studies Struct. Eng., 6, 31-44. https://doi.org/10.1016/j.csse.2016.05.002
  5. Eldin, M.N., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct., Int. J., 27(5), 633-646.
  6. FEMA (2000), Recommended seismic design criteria for new steel moment-frame buildings; In FEMA350, Washington D.C., USA.
  7. Khazaei, M. (2013), "Investigation on dynamics nonlinear analysis of steel frames with steel dampers", Procedia Eng., 54, 401-412. https://doi.org/10.1016/j.proeng.2013.03.036
  8. Kim, Y. and Oh, S. (2007), "Effect of the moment transfer efficiency of a beam web on deformation capacity at box column-to-beam connections", Eng. Struct., 63, 24-36.
  9. Koetake, Y., Chusilp, P., Zhang, Z., Masakazu, A., Suita, K., Inoue, K. and Uno, N. (2005), "Mechanical property of beamto-column moment connection with hysteretic dampers for column weak axis", J. Eng. Struct., 27,109-17. https://doi.org/10.1016/j.engstruct.2004.09.002
  10. Lee, J. and Kim, J. (2015), "Seismic performance evaluation of moment frames with slit-friction hybrid dampers", Earthq. Struct., Int. J., 9(6), 1291-3111. https://doi.org/10.12989/eas.2015.9.6.1291
  11. Lee, J. and Kim, J. (2017), "Development of box-shaped steel slit dampers for seismic retrofit of building structures", Eng. Struct., 150(1), 934-946. https://doi.org/10.1016/j.engstruct.2017.07.082
  12. Lu, L., Xu, Y., Liu J. and Lim, J. (2018a), "Cyclic performance and design recommendations of a novel weak-axis Reduced Beam Section connection", Steel Compos. Struct., Int. J., 27(3), 337-353.
  13. Lu, L., Xu, Y., Liu J. and Lim, J. (2018b), Cyclic response and design procedure of a weak-axis cover-plate moment connection", Steel Compos. Struct., Int. J., 26(3), 329-345.
  14. Lu, J., Wu, B. and Mei, Y. (2018c), "Buckling mechanism of steel core and global stability design method for fixed-end bucklingrestrained braces", Eng. Struct., 174, 447-461. https://doi.org/10.1016/j.engstruct.2018.07.024
  15. Ma, H., Jiang, W. and Cho, C. (2011), "Experimental study on two types of newbeam-to-column connections", Steel Compos. Struct., Int. J., 11(4), 851-865.
  16. Mahmoudi, M. and Abdi, M.G. (2012), "Evaluating response modification factors of TADAS frames", J. Constr. Steel Res., 71, 162-170. https://doi.org/10.1016/j.jcsr.2011.10.015
  17. Oh, S., Kim, Y. and Moon, T. (2007), "Cyclic performance of existing moment connections in steel retrofitted with a reduced beam section and bottom flange reinforcements", Can. J. Civil Eng., 34, 199-209. https://doi.org/10.1139/l06-125
  18. Oh, S.H., Kim, Y.J. and Ryu, H.S. (2009), "Seismic performance of steel structures with slit dampers, Journal of Engineering Structures", J. Constr. Steel Res., 31, 1997-2008.
  19. Rai, D.C., Annam, P.K. and Pradhan, T. (2013), "Seismic testing of steel braced frames with aluminum shear yielding dampers", Eng. Struct., 46, 737-747 https://doi.org/10.1016/j.engstruct.2012.08.027
  20. Sabelli, R., Mahin, S. and Chang, C. (2003), "Seismic demands on steel braced frame buildings with buckling-restrained braces", J. Eng. Struct., 25, 655-666. https://doi.org/10.1016/S0141-0296(02)00175-X
  21. Shahri, S.F and Mousavi, S.R. (2018), "Seismic behavior of beamto-column connections with elliptic slit dampers", Steel Compos. Struct., Int. J., 26(3), 289-301.
  22. Suita, K., Nakashima, M. and Morisako, K. (1998), "Tests of welded beam-column subassemblies. II: Detailed behavior", J. Struct. Eng., 124, 1245-52. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1245)
  23. Tanaka, K. and Sasaki, Y. (2000), "Hysteretic Performance of Shear Panel Damper Ultra Low Yield Strength Steel for Seismic Response Control of Buildings", Proceedings of the 12th World Conference on Earthquake Engineering-12WCEE 2000, Auckland, New Zealand.
  24. Tremblay, R., Bolduc, P., Neville, R. and Devall, R. (2006), "Seismic testing and performance of buckling-restrained bracing systems", Can. J. Civil Eng., 33, 183-198. https://doi.org/10.1139/l05-103
  25. Vatansever, C. and Kutsal, K. (2018), "Effect of bolted splice within the plastic hinge zone on beam-to-column connection behavior", Steel Compos. Struct., Int. J., 28(6), 767-778.
  26. Vetr, M.G. and Ghamari, A. (2019), Experimentally and analytically study on eccentrically braced frame with vertical shear links, Struct. Des. Tall Special Build., e1587. DOI: https://doi.org/10.1002/tal.1587
  27. Vetr, M.G., Ghamari, A. and Bouwkamp, J. (2017), "Investigating the nonlinear behavior of Eccentrically Braced Frame with vertical shear links (V-EBF)", J. Build. Eng., 10, 47-59. https://doi.org/10.1016/j.jobe.2017.02.002
  28. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017a), "Tubular Web Reduced Beam Section (TW-RBS) connection, a numerical and experimental study and result comparison", Steel Compos. Struct., Int. J., 23(5), 571-583. https://doi.org/10.12989/scs.2017.23.5.571
  29. Zahrai, S.M., Mirghaderi, S.R. and Saleh, A. (2017b), "Increasing plastic hinge length using two pipes in a proposed web Reduced Beam Section, an experimental and numerical study", Steel Compos. Struct., Int. J., 23(4), 571-583. https://doi.org/10.12989/scs.2017.23.5.571
  30. Zarei, A., Vaghefi, M. and Fiouz, A.R. (2016), "Numerical investigation seismic performance of rigid skewed Beam-tocolumn connection with reduced beam section", Struct. Eng. Mech., Int. J., 57(3), 507-528. https://doi.org/10.12989/sem.2016.57.3.507
  31. Zhou, X.P., Zhang, Y.X. and Ha, Q.L. (2008), "Real-time computerized tomography (CT) experiments on limestone damage evolution during unloading", Theor. Appl. Fracture Mech., 50(1), 49-56 https://doi.org/10.1016/j.tafmec.2008.04.005
  32. Zhu, B., Wang, T. and Zhang, L. (2018), "Quasi-static test of assembled steel shear panel dampers with optimized shapes", Eng. Struct., 172, 346-357. https://doi.org/10.1016/j.engstruct.2018.06.004

피인용 문헌

  1. Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275