Steel and Composite Structures

  • 제30권4호
  • /
  • Pages.337-350
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Confinement coefficient of concrete-filled square stainless steel tubular stub columns

  • Ding, Fa-xing (School of Civil Engineering, Central South University) ;
  • Yin, Yi-xiang (School of Civil Engineering, Central South University) ;
  • Wang, Liping (School of Civil Engineering, Central South University) ;
  • Yu, Yujie (School of Civil Engineering, Central South University) ;
  • Luo, Liang (School of Civil Engineering, Central South University) ;
  • Yu, Zhi-wu (School of Civil Engineering, Central South University)
  • 투고 : 2018.07.13
  • 심사 : 2019.02.18
  • 발행 : 2019.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this paper is to investigate the confinement coefficient of concrete-filled square stainless steel tubular (CFSSST) stub columns under axial loading. A fine finite 3D solid element model was established, which utilized a constitutive model of stainless steel considering the strain-hardening characteristics and a triaxial plastic-damage constitutive model of concrete with features of the parameter certainty under axial compression. The finite element analysis results revealed that the increased ultimate bearing capacity of CFSSST stub columns compared with their carbon steel counterparts was mainly due to that the composite action of CFSSST stub columns is stronger than that of carbon steel counterparts. A further parametric study was carried out based on the verified model, and it was found that the stress contribution of the stainless steel tube is higher than the carbon steel tube. The stress nephogram was simplified reasonably in accordance with the limit state of core concrete and a theoretical formula was proposed to estimate the ultimate bearing capacity of square CFSSST stub columns using superposition method. The predicted results showed satisfactory agreement with both the experimental and FE results. Finally, the comparisons of the experimental and predicted results using the proposed formula and the existing codes were illustrated.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. ACI 318-11 (2011), Building Code Requirements for Structural Concrete and Commentary ACI Committee 318; American Concrete Institute, Detroit, MI, USA.
  2. CECS 159 (2004), Technical Specification for Structures with Concrete-Filled Rectangular Steel Tube Members; China Association for Engineering Construction Standardization, Beijing, China.
  3. Chen, Z.Y., Zhu, J.Q. and Wu, P.G. (1992), High-strength Concrete and Its Applications, Tsinghua University Press, Beijing, China. [In Chinese]
  4. Ding, F.X. and Yu, Z.W. (2006), "Strength criterion for plain concrete under multiaxial stress based on damage Poisson's ratio", Acta Mech. Solid. Sin., 19(4), 307-316. https://doi.org/10.1007/s10338-006-0637-1
  5. Ding, F.X., Ying, X.Y., Zhou, L.C. and Yu, Z.W. (2011a), "Unified calculation method and its application in determining the uniaxial mechanical properties of concrete", Front. Archit. Civil Eng. China, 5(3), 381. https://doi.org/10.1007/s11709-011-0118-6
  6. Ding, F.X., Yu, Z.W., Bai, Y. and Gong, Y.Z. (2011b), "Elastoplastic analysis of circular concrete-filled steel tube stub columns", J. Constr. Steel Res., 67(10), 1567-1577. https://doi.org/10.1016/j.jcsr.2011.04.001
  7. Ding, F.X., Fang, C.J., Bai, Y. and Gong, Y.Z. (2014), "Mechanical performance of stirrup-confined concrete-filled steel tubular stub columns under axial loading", J. Constr. Steel Res., 98, 146-157. https://doi.org/10.1016/j.jcsr.2014.03.005
  8. Ding, F.X., Luo, L., Zhu, J., Wang, L.P. and Yu, Z.W. (2018), "Mechanical behavior of stirrup-confined rectangular CFT stub columns under axial compression", Thin-Wall. Struct., 124, 136-150. https://doi.org/10.1016/j.tws.2017.12.007
  9. Ellobody, E. and Ghazy, M.F. (2013), "Polypropylene fibre reinforced concrete-stainles steel composite columns: design and behavior", Adv. Struct. Eng., 16(3), 427-440. https://doi.org/10.1260/1369-4332.16.3.427
  10. Eurocode 2 (2004), Design of Concrete Structures, part 1-1: General Rules and Rules for Buildings; British Standards Institution, London, UK.
  11. Eurocode 3 (2006), Design of Steel Structure, part 1-4: General Rules-Supplementary Rules for Stainless Steel; BS EN 1993-1-4, British Standards Institution, London, UK.
  12. Eurocode 4 (2004), Design of Steel Composite Steel and Concrete Structures, part 1-1: General Rules and Rules for Building; BS EN 1994-1-1, British Standards Institution, London, UK.
  13. Evirgen, B., Tuncan, A. and Taskin, K. (2014), "Structural behavior of concrete filled steel tubular sections (CFT/CFST) under axial compression", Thin-Wall. Struct., 80(9), 46-56. https://doi.org/10.1016/j.tws.2014.02.022
  14. Gedge, G. (2008), "Structural uses of stainless steel - buildings and civil engineering", J. Constr. Steel Res., 64(11), 1194-1198. https://doi.org/10.1016/j.jcsr.2008.05.006
  15. Han, L.H., Chen, F., Liao, F.Y., Tao, Z. and Uy, B, (2013), "Fire performance of concrete filled stainless steel tubular columns", Eng. Struct., 56(6), 165-181. https://doi.org/10.1016/j.engstruct.2013.05.005
  16. Jankowaik, T. and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Found. Civ. Environ. Eng., 6, 53-69.
  17. Lam, D. and Gardner, L. (2008), "Structural design of stainless steel concrete filled columns", J. Constr. Steel Res., 64(11), 1275-1282. https://doi.org/10.1016/j.jcsr.2008.04.012
  18. Li, N., Lu, Y.Y., Li, S. and Liang, H.J. (2015), "Statistical-based evaluation of design codes for circular concrete-filled steel tube columns", Steel Compos. Struct., Int. J., 18(2), 519-546. https://doi.org/10.12989/scs.2015.18.2.519
  19. Liao, F.Y., Han, L.H., Tao, Z. and Rasmussen, K.J.R. (2016), "Experimental behavior of concrete-filled stainless steel tubular columns under cyclic lateral loading", J. Struct. Eng., 143(4), 04016219.
  20. Lume, G., Rasmussen, K.J.R., Tao, Z. and Han, L.H. (2017), "Experimental behaviour of high-strength thin-walled concrete filled steel tubular stub columns", Ce/papers, 1(2-3), 1976-1985. https://doi.org/10.1002/cepa.242
  21. Patel, V.I., Liang, Q.Q. and Hadi, M.N.S. (2014), "Nonlinear analysis of axially loaded circular concrete-filled stainless steel tubular short columns", J. Constr. Steel Res., 101(101), 9-18. https://doi.org/10.1016/j.jcsr.2014.04.036
  22. Patton, M.L. and Singh, K.D. (2014), "Finite element modelling of concrete-filled lean duplex stainless steel tubular stub columns", Int. J. Steel Struct., 14(3), 619-632. https://doi.org/10.1007/s13296-014-3020-y
  23. Pons, D., Espinos, A., Albero, V. and Romero, M.L. (2018), "Numerical study on axially loaded ultra-high strength concrete-filled dual steel columns", Steel Compos. Struct., Int. J., 26(6).
  24. Rasmussen, K.J.R. (2003), "Full-range stress-strain curves for stainless steel alloys", J. Constr. Steel Res., 59(1), 47-61. https://doi.org/10.1016/S0143-974X(02)00018-4
  25. Tam, V.W.Y., Wang, Z.B. and Tao, Z. (2014), "Behaviour of recycled aggregate concrete filled stainless steel stub columns", Mater. Struct., 47(1-2), 293-310. https://doi.org/10.1617/s11527-013-0061-1
  26. Tao, Z., Uy, B., Liao, F.Y. and Han, L.H. (2011), "Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression", J. Constr. Steel Res., 67(11), 1719-1732. https://doi.org/10.1016/j.jcsr.2011.04.012
  27. Uy, B., Tao, Z. and Han, L.H. (2011), "Behaviour of short and slender concrete-filled stainless steel tubular columns", J. Constr. Steel Res., 67(3), 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004
  28. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., Int. J., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  29. Yang, Y., Zhou, J., Wei, J., Huang, L., Wu, Q. and Chen, B. (2016), "Experimental study on the compression of concrete filled steel tubular latticed columns with variable cross section", Steel Compos. Struct., Int. J., 22(3), 663-675. https://doi.org/10.12989/scs.2016.22.3.663

피인용 문헌

  1. Initial stiffness and moment capacity assessment of stainless steel composite bolted joints with concrete-filled circular tubular columns vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.681
  2. Fully nonlinear inelastic analysis of rectangular CFST frames with semi-rigid connections vol.38, pp.5, 2021, https://doi.org/10.12989/scs.2021.38.5.497
  3. Analytical Modelling of LACFCST Stub Columns Subjected to Axial Compression vol.9, pp.9, 2021, https://doi.org/10.3390/math9090948
  4. Analytical Modelling of LACFCST Stub Columns Subjected to Axial Compression vol.9, pp.9, 2021, https://doi.org/10.3390/math9090948
  5. Numerical Investigation of Composite Behavior and Strength of Rectangular Concrete-Filled Cold-Formed Steel Tubular Stub Columns vol.14, pp.20, 2019, https://doi.org/10.3390/ma14206221