DOI QR코드

DOI QR Code

Hygrothermal effects on the behavior of reinforced-concrete beams strengthened by bonded composite laminate plates

  • Antar, Kamel (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Amara, Khaled (Department of Civil Engineering, Faculty of Technology, University center of Ain Temouchent) ;
  • Benyoucef, Samir (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department) ;
  • Bouazza, Mokhtar (Department of Civil Engineering, Faculty of Technology, University of Bechar) ;
  • Ellali, Mokhtar (Department of Civil Engineering, Faculty of Technology, University center of Ain Temouchent)
  • 투고 : 2018.01.05
  • 심사 : 2019.01.09
  • 발행 : 2019.02.10

초록

The purpose of this paper is to investigate the hygrothermal effects on the behavior of reinforced-concrete beams strengthened by bonded composite laminate plates (${\theta}n/90m)s$. This work is based on a simple theoretical model to estimate the interfacial stresses developed between the concrete beam and the composite with taking into account the hygrothermal effect. Fibre orientation angle effects of number of $90^{\circ}$ layers and effects of plate thickness and length on the distributions of interfacial stress in the concrete beams reinforced with composite plates have also been studied.

키워드

참고문헌

  1. Barnes, R.A. and Mays, G.C. (2001), "The transfer of stress through a steel to concrete adhesive bond", Int. J. Adhes., 21(6), 495-502. https://doi.org/10.1016/S0143-7496(01)00031-8
  2. Beldjelili, Y., Tounsi, A. and Mahmoud, S.R. (2016), "Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometricplate theory", Smart Struct. Syst., 18(4), 755-786. https://doi.org/10.12989/sss.2016.18.4.755
  3. Benachour, A., Benyoucef, S., Tounsi, A. and Adda Bedia, E A. (2008), "Interfacial stress analysis of steel beams reinforced with bonded prestressed FRP plate", J. Eng. Struct., 30(11), 3305-3315. https://doi.org/10.1016/j.engstruct.2008.05.007
  4. Benchohra, M., Driz, H., Bakora, A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2018), "A new quasi-3D sinusoidal shear deformation theory for functionally graded plates", Struct. Eng. Mech., 65(1), 19-31. https://doi.org/10.12989/SEM.2018.65.1.019
  5. Benyoucef, S., Tounsi, A., Meftah, S.A. and Adda Bedia, E.A. (2006), "Approximate analysis of the interfacial stress concentrations in FRP-RC hybrid beams", Compos. Interf., 13(7), 561-571. https://doi.org/10.1163/156855406778440758
  6. Bouakaz, K., Hassaine Daouadji, T., Meftah, S.A., Ameur, M. and Adda Bedia, E.A. (2014), "A numerical analysis of steel beams strengthened with composite materials", Mech. Compos. Mater., 50(4), 685-696.
  7. Bouazaoui, L.A. (2008), "Analysis of steel/concrete interfacial shear stress by means of pullout test", Int. J. Adhes., 28(3), 101-108. https://doi.org/10.1016/j.ijadhadh.2007.02.006
  8. Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013), "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., 14(1), 85-104. https://doi.org/10.12989/scs.2013.14.1.085
  9. Bouhadra, A., Tounsi, A., Bousahla, A.A., Benyoucef, S. and Mahmoud, S.R. (2018), "Improved HSDT accounting for effect of thickness stretching in advanced composite plates", Struct. Eng. Mech., 66(1), 61-73. https://doi.org/10.12989/SEM.2018.66.1.061
  10. Bourada, F., Amara, K., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "A novel refined plate theory for stability analysis of hybrid and symmetric S-FGM plates", Struct. Eng. Mech., 68(6), 661-675. https://doi.org/10.12989/sem.2018.68.6.661
  11. Bousahla, A.A., Benyoucef, S., Tounsi, A. and Mahmoud, S.R. (2016), "On thermal stability of plates with functionally graded coefficient of thermal expansion", Struct. Eng. Mech., 60(2), 313-335. https://doi.org/10.12989/sem.2016.60.2.313
  12. Chikh, A., Tounsi, A., Hebali, H. and Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Struct. Syst., 19(3), 289-297. https://doi.org/10.12989/sss.2017.19.3.289
  13. Deng, J. and Marcus, M.K. (2004), "Stress analysis of steel beams reinforced with a bonded CFRP plate", Compos. Struct., 65(2), 205-215. https://doi.org/10.1016/j.compstruct.2003.10.017
  14. Denton, S.N. (2001), "Analysis of stresses developed in FRP plated beams due to thermal effects", FRP Compos. Civil Eng., 527-536.
  15. Edward, G.N. (2008), Concrete Construction Engineering Handbook, CRC Press.
  16. El-Haina, F., Bakora, A., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2017), "A simple analytical approach for thermal buckling of thick functionally graded sandwich plates", Struct. Eng. Mech., 63(5), 585-595. https://doi.org/10.12989/SEM.2017.63.5.585
  17. Elamary, A.S. and Abd-Elwahab, R.K. (2016), "Numerical simulation of concrete beams reinforced with composite GFRP-Steel bars under three points bending" Struct. Eng. Mech., 57(5), 937-949. https://doi.org/10.12989/sem.2016.57.5.937
  18. Gibson, R.F. (1994), Principles of Composites Material Mechanics, McGraw-Hill Inc.
  19. Hadji, L., Hassaine Daouadji, T., Meziane, A.M. and Adda Bedia, E.A. (2016), "Analyze of the interfacial stress in reinforced concrete beams strengthened with externally bonded CFRP plate", Steel Compos. Struct., 20(2), 413-429. https://doi.org/10.12989/scs.2016.20.2.413
  20. Hassaine Daouadji, T. (2017), "Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate", Adv. Comput. Des., 2(1), 57-69. https://doi.org/10.12989/ACD.2017.2.1.057
  21. Herakovich, CT. (1998), Mechanics of Fibrous Composites, Wiley, U.S.A.
  22. Kara, I.F. (2016), "Flexural performance of FRP-reinforced concrete encased steel composite beams", Struct. Eng. Mech., 59(4), 775-793. https://doi.org/10.12989/sem.2016.59.4.775
  23. Krour, B., Bernard, F. and Tounsi, A. (2014), "Fibers orientation optimization for concrete beam strengthened with a CFRP bonded plate: A coupled analytical-numerical investigation", Eng. Struct., 56, 218-227. https://doi.org/10.1016/j.engstruct.2013.05.008
  24. Malek, A.M., Saadatmanesh, H. and Ehsani, M.R. (1998), "Prediction of failure load of RC beams strengthened with FRP plate due to stress concentration at the plate end", ACI Struct. J., 95(1), 142-152.
  25. Menasria, A., Bouhadra, A., Tounsi, A., Bousahla, A.A. and Mahmoud, S.R. (2017), "A new and simple HSDT for thermal stability analysis of FG sandwich plates", Steel Compos. Struct., 25(2), 157-175. https://doi.org/10.12989/SCS.2017.25.2.157
  26. Roberts, TM. (1989), "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams", Struct. Eng., 67(12), 229-233.
  27. Roberts, TM. and Haji-Kazemi, H. (1989), "Theoretical study of the behavior of reinforced concrete beams strengthened by externally bonded steel plates", Proc. Inst. Civil Eng., 87(2), 39-55.
  28. Robinovitch, O. and Frostig, Y. (2000), "Closed-form higher-order analysis of beams strengthened with FRP strips", J. Compos. Constr., 4(2), 65-74. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:2(65)
  29. Robinovitch, O. and Frostig, Y. (2001), "Nonlinear higher-order analysis of cracked RC beams strengthened with FRP strips", J. Struct. Eng., 127(4), 381-389. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(381)
  30. Schmit, K. (1998), Fiberglass Reinforced Plastic (FRP) Piping Systems Designing Process/Facilities Piping Systems with FRP a Comparison to Traditional Metallic Materials, Project Engineer Specialty Plastics, Inc. Baton Rouge, LA, U.S.A.
  31. Shen, H.S., Teng, J.G. and Yang, J. (2001), "Interfacial stresses in beams and slabs bonded with a thin plate", J. Eng. Mech., 127(4), 399-406. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(399)
  32. Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23(7), 857-871. https://doi.org/10.1016/S0141-0296(00)00090-0
  33. Smith, S.T. and Teng, J.G. (2002), "FRP-strengthened RC beams. I: Review of debonding strength models", Eng. Struct., 24(4), 385-395. https://doi.org/10.1016/S0141-0296(01)00105-5
  34. Smith, S.T. and Teng, J.G. (2002), "FRP-strengthened RC beams. II: Assessment of debonding strength models", Eng. Struct., 24(4), 397-417. https://doi.org/10.1016/S0141-0296(01)00106-7
  35. Stratford, T. and Cadei, J. (2006), "Elastic analysis of adhesion stresses for the design of a strengthened plate bonded to a beam", Constr. Build. Mater., 20(1-2), 34-45. https://doi.org/10.1016/j.conbuildmat.2005.06.041
  36. Taljsten, B. (1997), "Strengthening of beams by plate bonding", J. Mater. Civil Eng., 9(4), 206-212. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(206)
  37. Touati, M., Tounsi, A. and Benguediab, M. (2015), "Effect of shear deformation on adhesive stresses in plated concrete beams: Analytical solutions", Comput. Concrete, 15(3), 141-166. https://doi.org/10.12989/cac.2015.15.2.141
  38. Tounsi, A. and Benyoucef, S. (2007), "Interfacial stresses in externally FRP-plated concrete beams", Int. J. Adhes. Adhes., 27(3), 207-215. https://doi.org/10.1016/j.ijadhadh.2006.01.009
  39. Tounsi, A. (2006), "Improved theoretical solution for interfacial stresses in concrete beams strengthened with FRP plate", Int. J. Sol. Struct., 43(14-15), 4154-4174. https://doi.org/10.1016/j.ijsolstr.2005.03.074
  40. Vaddadi, P., Nakamura, T. and Singh, R.P. (2007), "Inverse analysis to determine hygrothermal properties in fiber reinforced composites", J. Compos. Mater., 41(3), 309-344. https://doi.org/10.1177/0021998306063372
  41. Vilnay, O. (1988), "The analysis of reinforced concrete beams strengthened by epoxy bonded steel plates", Int. J. Cement Compos. Light Weight Concrete, 10(2), 73-78. https://doi.org/10.1016/0262-5075(88)90033-4
  42. Ye, J.Q. (2001), "Interfacial shear stress transfer of RC beams strengthened by bonded composite plates", Cement Concrete Compos., 23(4-5), 411-417. https://doi.org/10.1016/S0958-9465(01)00015-4
  43. Younsi, A., Tounsi, A., Zaoui, F.Z., Bousahla, A.A. and Mahmoud, S.R. (2018), "Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates", Geomech. Eng., 14(6), 519-532. https://doi.org/10.12989/GAE.2018.14.6.519

피인용 문헌

  1. Modeling and analysis of the imperfect FGM-damaged RC hybrid beams vol.6, pp.2, 2019, https://doi.org/10.12989/acd.2021.6.2.117
  2. A new model for adhesive shear stress in damaged RC cantilever beam strengthened by composite plate taking into account the effect of creep and shrinkage vol.79, pp.5, 2019, https://doi.org/10.12989/sem.2021.79.5.531
  3. New solution for damaged porous RC cantilever beams strengthening by composite plate vol.10, pp.3, 2019, https://doi.org/10.12989/amr.2021.10.3.169