DOI QR코드

DOI QR Code

Numerical simulation of the constructive steps of a cable-stayed bridge using ANSYS

  • Lazzari, Paula M. (Civil Engineering Graduate Program, Federal University of Rio Grande do Sul) ;
  • Filho, Americo Campos (Civil Engineering Graduate Program, Federal University of Rio Grande do Sul) ;
  • Lazzari, Bruna M. (Civil Engineering Graduate Program, Federal University of Rio Grande do Sul) ;
  • Pacheco, Alexandre R. (Civil Engineering Graduate Program, Federal University of Rio Grande do Sul) ;
  • Gomes, Renan R.S. (Civil Engineering Graduate Program, Federal University of Rio de Janeiro)
  • 투고 : 2018.01.23
  • 심사 : 2018.05.21
  • 발행 : 2019.02.10

초록

This work addresses a three-dimensional nonlinear structural analysis of the constructive phases of a cable-stayed segmental concrete bridge using The Finite Element Method through ANSYS, version 14.5. New subroutines have been added to ANSYS via its UPF customization tool to implement viscoelastoplastic constitutive equations with cracking capability to model concrete's structural behavior. This numerical implementation allowed the use of three-dimensional twenty-node quadratic elements (SOLID186) with the Element-Embedded Rebar model option (REINF264), conducting to a fast and efficient solution. These advantages are of fundamental importance when large structures, such as bridges, are modeled, since an increasing number of finite elements is demanded. After validating the subroutines, the bridge located in Rio de Janeiro, Brazil, and known as "Ponte do Saber" (Bridge of Knowledge, in Portuguese), has been numerically modeled, simulating each of the constructive phases of the bridge. Additionally, the data obtained numerically is compared with the field data collected from monitoring conducted during the construction of the bridge, showing good agreement.

키워드

참고문헌

  1. Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng. Mech., 54(1), 69-85. https://doi.org/10.12989/sem.2015.54.1.069
  2. Amiri, G.G., Jahromi, A.J. and Mohebi, B. (2012), "Determination of plastic hinge properties for static nonlinear analysis of FRP-strengthened circular columns in bridges", Comput. Concrete, 10(5), 435-455. https://doi.org/10.12989/cac.2012.10.5.435
  3. Anil, O. and Uyaroglu, B. (2013), "Nonlinear finite element analysis of loading transferred from column to socket base", Comput. Concrete, 11(5), 475-492. https://doi.org/10.12989/cac.2013.11.5.475
  4. ANSYS (2013), Inc. Theory Reference (Version 14.5).
  5. Bulut, N., Anil, O. and Belgin, C.M. (2011), "Nonlinear finite element analysis of RC beams strengthened with CFRP strip against shear", Comput. Concrete, 8(6), 717-733. https://doi.org/10.12989/cac.2011.8.6.717
  6. Chen, W.F. and Han, D.J. (1988), Plasticity for Structural Engineers, Springer-Verlag, New York, U.S.A.
  7. Comite Euro-International du Beton (2012), CEB-FIP Model Code 2010, Bulletin N. 65.
  8. Demir, A., Tekin, M., Turali, T. and Bagci, M. (2014), "Strengthening of RC beams with prefabricated RC U cross- sectional plates", Struct. Eng. Mech., 49(6), 673-685. https://doi.org/10.12989/sem.2014.49.6.673
  9. Demir, S. and Husem, M. (2015), "Investigation of bond-slip modeling methods used in FE analyis of RC members", Struct. Eng. Mech., 56(2), 275-291. https://doi.org/10.12989/sem.2015.56.2.275
  10. Garambone, V.F. (2012), Ponte do Saber, Paper Presented during the V Brazilian Congress of Bridges and Structures.
  11. Gomes, R.R.S. (2013), "Technical and constructive considerations of a cable stayed bridge design", M.Sc. Dissertation, Federal University of Rio de Janeiro, Rio de Janeiro, RJ, Brazil.
  12. Hinton, E. (1988), Numerical Methods and Software for Dynamic Analysis of Plates and Shells, Pineridge Press Limited, Swansea, Wales, U.K.
  13. Kazaz, I. (2011), "Finite element analysis of shear-critical reinforced concrete walls", Comput. Concrete, 8(2), 143-162. https://doi.org/10.12989/cac.2011.8.2.143
  14. Kibar, H. and Ozturk, T. (2014), "The evaluation with ANSYS of stresses in hazelnut silos using Eurocode 1", Struct. Eng. Mech., 51(1), 15-37. https://doi.org/10.12989/sem.2014.51.1.015
  15. Lazzari, B.M., Campos Filho, A., Lazzari, P.M. and Pacheco, A.R. (2017a), "Using element-embedded rebar model in ANSYS for the study of reinforced and prestressed concrete structures", Comput. Concrete, 19(4), 347-356. https://doi.org/10.12989/cac.2017.19.4.347
  16. Lazzari, B.M. (2015), "Finite element analysis of reinforced and prestressed concrete elements under plane stress states", M.Sc. Dissertation, Federal University of Rio Grande do Sul, Porto Alegre, RS, Brazil.
  17. Lazzari, P.M. (2016) "Numerical simulation of construction stages of cable-stayed bridges through the finite element method", Ph.D. Dissertation, Federal University of Rio Grande do Sul, Porto Alegre, RS, Brazil.
  18. Lazzari, P.M., Campos Filho, A., Lazzari, B.M. and Pacheco, A.R. (2017b), "Structural analysis of a prestressed segmented girder using contact elements in ANSYS", Comput. Concrete, 20(3), 319-327. https://doi.org/10.12989/CAC.2017.20.3.319
  19. Mondal, T.G. and Prakash, S.S. (2016), "Nonlinear finite-element analysis of RC bridge columns under torsion with and without axial compression", J. Brid. Eng., 21(2), 04015037.
  20. Ottosen, N.S. (1977), "A failure criterion for concrete", J. Eng. Mech. Div., 103(4), 527-535. https://doi.org/10.1061/JMCEA3.0002248
  21. Shaheen, Y.B.I., Mahmoud, A.M. and Refat, H. (2016), "Structural performance of ribbed ferrocement plates reinforced with composite materials", Struct. Eng. Mech., 60(4), 567-594. https://doi.org/10.12989/sem.2016.60.4.567
  22. Toledo, R.L.S. (2014) "Design of cable-stayed bridges concrete stiffening girders", M.Sc. Dissertation, Federal University of Rio de Janeiro, Rio de Janeiro, RJ, Brazil.
  23. Zhu, Q., Xu, Y.L. and Xiao, X. (2015), "Multiscale modeling and model updating of a cable-stayed bridge. I: Modeling and influence line analysis", J. Brid. Eng., 20(10), 04014112.