Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of the Axial Stiffness of Reinforcing Piles in Vertical Extension Structures

수직증축 공동주택 하부 신설 보강말뚝의 축강성 산정

  • Kim, Do-Hyun (Dept. of Civil and Environmental Engrg., Massachusetts Institute of Technology) ;
  • Jeong, Sang-Seom (Dept. of Civil and Environment Engrg., Yonsei Univ.) ;
  • Cho, Hyun-Chul (Hyundai Engineering and Construction)
  • 김도현 (매사추세츠 공과대학 토목환경공학과) ;
  • 정상섬 (연세대학교 건설환경공학과) ;
  • 조현철 (현대엔지니어링)
  • Received : 2019.08.19
  • Accepted : 2019.11.07
  • Published : 2019.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the axial stiffness of reinforcing piles (Kvr) for the vertical extension remodeling structures was estimated through 3D finite element analysis. In the computation of the minimum required axial stiffness of reinforcing piles, proposed maximum axial stiffness of old and deteriorated existing piles (Kve) based on theoretical and experimental approaches will be applied. Through this, the required increase rate of axial stiffness of reinforcing piles in order to support the increased structural loading was proposed for end-bearing and friction piles by different slenderness ratio (L/D). The numerical model was validated by comparing the computed results with actual field measurements. Based on the computed results, it was concluded that the end-bearing reinforcing pile needs 44% - 67% increase in axial stiffness to deal with the deterioration of existing piles and support the additional structural load due to vertical extension remodeling.

본 연구에서는 수직증축 공동주택 하부 신설 보강말뚝의 축강성(Kvr)을 기존말뚝의 열화를 고려한 이론적인 접근과 수치해석을 통하여 산정하였다. 3차원 유한요소 수치해석을 수행하는 과정에서, 이론적인 접근과 38본의 시험 말뚝계측 결과를 통하여 제안된 열화를 고려한 기존말뚝 축강성(Kve)의 상한 값을 적용하였다. 이를 통해, 수직증축 리모델링으로 인하여 증가된 하중을 안정적으로 지지하기 위한 신설 보강말뚝의 최소 축강성을 산정하였다. 신설 보강말뚝의 축강성 제안은 선단지지 말뚝과 마찰말뚝에 대해 수행하였고, 다양한 세장비(L/D)에 따라 제안하였다. 해석기법은 기존말뚝의 설계 당시의 양호한 상태를 고려한 말뚝지지 전면기초 거동 해석과 열화가 고려된 기존말뚝의 축강성을 적용한 말뚝지지 전면기초 거동 해석을 수행하였다. 두 해석기법에 대한 검증을 수행한 결과 말뚝지지 전면기초 거동해석이 가능한 것으로 확인되었고, 이를 통하여 기존말뚝의 열화가 발생하였을 때 선단지지 신설 보강말뚝 축강성이 44 - 67% 증가되어야 수직증축 구조물의 안정성이 확보됨을 알 수 있었다.

Keywords

References

  1. Artes, J., Wadel, G., and Marti, N (2017), "Vertical Extension and Improving of Existing Buildings", The Open Construction and Building Technology Journal, pp.83-94.
  2. Cho, H. (2019), A Study on the Axial Stiffness and Load Distribution Ratio on Existing and Reinforcing Piles in Vertical Apartment Extension, Master thesis, Yonsei University, Seoul, Korea.
  3. Choi, C.H., Lee, H.J., Choi, K.S., You, Y.C., and Kim, J.Y. (2017), "A Study of Prestressed Concrete Pile Stiffness for Structural Analysis of Condominium Remodeling with Vertical Story Extension", Journal of the Korean Geotechnical Society, Vol.33, No.12, pp. 81-92. https://doi.org/10.7843/KGS.2017.33.12.81
  4. Das, B. M. (2015), Principles of Foundation Engineering, Cengage learning.
  5. Jang, Y., Wang, S., Han, J., Park, K., and Pyun, M. (2016), "Development of Optimal Reinforcement Foundation Method for Vertical Extension Remodeling, Proceedings of KSEG Spring Conference, pp.119-120.
  6. Jeong, S.S. (2015), YSPR User's manual.
  7. Jeong, S.S. and Cho, H. C. (2019), "A Study on the Load Distribution Ratio and Axial Stiffness on Existing and Reinforcing Pile in Vertical Extension Remodeling", Journal of the Korean Geotechnical Society, Vol.35, No.1, pp.17-30. https://doi.org/10.7843/KGS.2019.35.1.17
  8. Jeong, S. S. and Kim, D. H. (2018), "Estimation of the Load Sharing Ratio of Pre-installed Columns in Top-down Buildings on Korean Rock", KSCE Journal of Civil Engineering, Vol.22, No.12, pp.4852-4861. https://doi.org/10.1007/s12205-017-1102-z
  9. Jeong, S.S., Lee, J.H., Park, J.J., Roh, Y.H., and Hong, M.H. (2017), "Analysis of Load Sharing Ratio of Piled Raft Foundation by Field Measurement", Journal of the Korean Geotechnical Society, Vol.33, No.8, pp.41-52. https://doi.org/10.7843/kgs.2017.33.8.41
  10. KICT (2013), "Development of Pre-loading Method for Reinforcement Piles of Apartment Remodeling (I)", KICT2013-260, KICT, pp. 23-26.
  11. Kim, D. H. (2018), Proposed shaft resistance of prebored precast pile using field loading test, Doctoral dissertation, Yonsei University, Seoul, Korea.
  12. Kim, D. H., Jeong, S. S., Jung, G. J., and Park, J. J. (2018), "Load Sharing Ratio of Prebored and Precast Pile in Top-down Method Construction Process", Structural Design of Tall and Special Buildings, 27, pp.1-14 (doi: 10.1002/tal.1472).
  13. Kim, D. H. and Jeong, S. S. (2019), "Comparative Study of Load Distribution Ratio of Various Piled raft Foundations based on Coupled Stiffness Matrix", Structural Design of Tall and Special Buildings, https://doi.org/10.1002/tal.1669.
  14. Kim, D. H., Kim, J. H., and Jeong, S. S. (2019), "Estimation of Axial Stiffness on Existing and Reinforcing Piles in Vertical Extension Remodeled Buildings", Engineering Structures, https://doi.org/10.1016/ J.engstruct.2019.109466.
  15. MOLIT (2013), Housing Act, Korea Ministry of Land, Infrastructureand Transport, p.2.
  16. PLAXIS, B. V. (2005), PLAXIS User's manual.
  17. Randolph, M. F. and Wroth, C.P. (1978), "Analysis of Deformation of Vertically Loaded Piles, Journal of Geotechnical Engineering Division of ASCE, Vol.104, No.12, pp.1465-1488. https://doi.org/10.1061/AJGEB6.0000729

Cited by

  1. Study on Increase in Stability of Floating and Underground Extension Method through Slab Pre-Construction vol.13, pp.24, 2019, https://doi.org/10.3390/su132413696