한국물환경학회지 (Journal of Korean Society on Water Environment)

  • 제35권6호
  • /
  • Pages.550-556
  • /
  • 2019
  • /
  • 2289-0971(pISSN)
  • /
  • 2289-098X(eISSN)
한국물환경학회 (Korean Society on Water Environment)
권호 표지
DOI QR코드

DOI QR Code

Anatase와 Rutile 결정상 비율에 따른 TiO2 nanotube의 OH radical 생성량 비교 연구

Comparison of OH radical generation depending on anatase to rutile ratio of TiO2 nanotube Photocatalyst

  • 이효주 (서울과학기술대학교 에너지환경공학과) ;
  • 이용호 (서울과학기술대학교 에너지환경공학과) ;
  • 박대원 (서울과학기술대학교 에너지환경공학과)
  • Lee, Hyojoo (Department of Environmental and Energy Engineering, Seoul National University of Science and Technology) ;
  • Lee, Yongho (Department of Environmental and Energy Engineering, Seoul National University of Science and Technology) ;
  • Pak, Daewon (Department of Environmental and Energy Engineering, Seoul National University of Science and Technology)
  • 투고 : 2019.08.08
  • 심사 : 2019.11.18
  • 발행 : 2019.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was carried out to improve the photocatalytic reaction of TiO2 photocatalyst. During the photocatalytic reaction, OH radicals are generated and they have an excellent oxidation capability for wastewater treatment. To evaluate the OH radicals generated according to crystallographic structure of TiO2 nanotubes photocatalyst, a probe compound, 4-Chlorobenzoic acid was monitored to evaluate OH radical. Ultraviolet light was applied for photocatalytic reaction of TiO2. The 4-Chlorobenzoic acid solution was prepared at laboratory. TiO2 nanotube was grown on titanium plate by using anodization method. The annealing temperature for TiO2 nanotube was varied from 400 to 900 ℃ and the crystal forms of the TiO2 nanotube was analyzed. Depending on annealing temperature, TiO2 nanotubes have shown different crystal forms; 100% anatase (0 % rutile), 18.4 % rutile (81.6 % anatase), 36.6 % rutile (63.4 % anatase) and 98.6% rutile (1.4% anatase). As the annealing temperature increases, the rutile ratio increases. OH radical generation from 18.4 % rutile TiO2 nanotube plate was about 3.8 times higher than before annealing and 1.4 times higher than only 100 % anatase-TiO2 nanotube. The efficiency of the 18.4% rutile TiO2 nanotube was the best in comparison to TiO2 nanotube with 18.4 %, 36.6 % and 98.6 % rutile. As a result, photocatalytic ability of 18.4 % rutile-TiO2 nanotube plate was higher than 100 % anatase-TiO2 nanotube plate.

키워드

참고문헌

  1. Fang, D., Luo, Z. P., Huang, K. L., and Lagoudas, D. C. (2011). Effect of heat treatment on morphology, crystalline structure and photocatalysis properties of $TiO_2$ nanotubes on Ti substrate and freestanding membrane, Applied Surface Science, 257(15), 6451-6461. https://doi.org/10.1016/j.apsusc.2011.02.037
  2. Jaroenworaluck, A., Regonini, D., Bowen, C. R., and Stevens, R. (2010). A microscopy study of the effect of heat treatment on the structure and properties of anodised $TiO_2$ nanotubes, Applied Surface Science, 256(9), 2672-2679. https://doi.org/10.1016/j.apsusc.2009.09.078
  3. Jarosz, M., Syrek, K., Kolodziej, J. K., Mech, J., Malek, K., Hnida, K., Lojewski, T., Jaskula, M., and Sulka, G. D. (2015). Heat treatment effect on crystalline structure and photoelectrochemical properties of anodic $TiO_2$ nanotube arrays formed in ethylene glycol and glycerol based electrolytes, Journal of Physical Chemistry C, 119(24), 24182-24191. https://doi.org/10.1021/acs.jpcc.5b08403
  4. Kim, D. E., Lee, Y. H., Kim, D. W., and Pak, D. W. (2017). The influence of current flow on OH radical generation in a Photocatalytic reactor of $TiO_2$ nanotube plates, Journal of Korean Oil Chemists Society, 34(2), 349-356. [Korean Literatute]
  5. Kim, S. H. (2014). Study on photocatalytic oxidation using nano-size $TiO_2$ and UV-LED for remonal of free cyanide in mine wastewater, Master's Thesis, Gyeongsang National University. [Korean Literature]
  6. Kim, Y. I. (2018). Fabrication and photocatalytic activity of rutile-anatase coupled $TiO_2$ by using surfactant, Master's Thesis, Hanyang University. [Korean Literature]
  7. Kim. S. M. (2005). Effect of rutile structure on $TiO_2$ photocatalytic activity, Journal of the Korean Chemical Society, 49(6), 567-574. [Korean Literature]. https://doi.org/10.5012/jkcs.2005.49.6.567
  8. Koo, H. M. (2015). Preparation of TNTA for pre-tretment of food waste leachate and characteristic assessment, Master's Thesis, Seoul National University of Science and Technology. [Korean Literatute].
  9. Lee, Y. H. (2001). Investigation of the reaction pathway of OH radicals produces by fenton oxidation in wastewater treatment, Master's Thesis, Seoul National University. [Korean Literature]
  10. Lee, Y. H. (2016). Evaluation of OH radical generation to nanotube Morphology of $TiO_2$ nanotube plate, Journal of Korean Society on Water Environment, 32(5), 403-409. [Korean Literature] https://doi.org/10.15681/KSWE.2016.32.5.403
  11. Li, G., Liu, Z. Q., Lu J., Wang, L., and Zhang, Z. (2009). Effect of calcination temperature on the morphology and surface properties of $TiO_2$ nanotube arrays, Applied Surface Science, 255(16), 7323-7328. https://doi.org/10.1016/j.apsusc.2009.03.097
  12. Liu, Z. Y, Zhang, X. T., Nishimoto, S. S., J, M., Tryk, D. A., Murakami, T., and Fujishima, A. (2007). Anatase $TiO_2$ nanoparticles on rutile $TiO_2$ nanorods: A heterogeneous nanostructure via layer-by-layer assembly, Journal of Langmuir, 23(22), 10916-10919 https://doi.org/10.1021/la7018023
  13. Ola, O. and Valer, M. M. (2015). Review of material design and reactor engineering on $TiO_2$ photocatalysis for $CO_2$ reduction, Journal of Photochemistry and Photobiology, 24, 16-42. https://doi.org/10.1016/j.jphotochemrev.2015.06.001
  14. Regonini, D., Jaroenworaluck, A., Stevens, R., and Browen, C. R. (2010). Effect of heat treatment on the properties and structure of $TiO_2$ nanotubes: phase composition and chemical composition, Surface and Interface Analysis, 42(3), 139-144. https://doi.org/10.1002/sia.3183
  15. Yang, Y., Wang, X., and Li, L. (2008). Synthesis and photovoltaic application of high aspect-ratio $TiO_2$ nanotube arrays by anodization, Journal of the American Ceramic Society, 91(9), 632-635. https://doi.org/10.1111/j.1551-2916.2007.02133.x
  16. Yao, Q. T., Sun, J. A., Zhu, Y. J., Zhang, H., and Tong, W. P. (2019). $TiO_2$ coating prepared by mechanical alloying treatment for photocatalytic degradation, Surface Engineering, 35(11), 927-932. https://doi.org/10.1080/02670844.2018.1554738
  17. Yu, J. G. and Wang, B. (2010). Effect of calcination temperature on morphology and photoelectrochemical properties of anodized titanium dioxide nanotube arrays, Applied catalysis B: Environmental, 94(3-4), 295-302. https://doi.org/10.1016/j.apcatb.2009.12.003