References
- ACI committee 234 (2012). ACI 234R-06: Guide for the Use of Silica Fume in Concrete (Reapproved 2012).
- ASTM C1240-15 (2015). Standard Specification for Silica Fume Used in Cementitious Mixtures.
- ASTM C1260-14 (2014). Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method).
- ASTM C1437-15 (2015). Standard Test Method for Flow of Hydraulic Cement Mortar.
- Boddy, A.M., Hooton, R.D., Thomas, M.D.A. (2003). The effect of the silica content of silica fume on its ability to control alkali-silica reaction, Cement and Concrete research, 33(8), 1263-1268. https://doi.org/10.1016/S0008-8846(03)00058-9
- Diamond, S. (2000). Mercury porosimetry: an inappropriate method for the measurement of pore size distributions in cement-based materials, Cement and Concrete Research, 30(10), 1517-1525. https://doi.org/10.1016/S0008-8846(00)00370-7
- Flores, Y.C., Cordeiro, G.C., Toledo Filho, R.D., Tavares, L.M. (2017). Performance of portland cement pastes containing nano-silica and different types of silica, Construction and Building Materials, 146, 524-530. https://doi.org/10.1016/j.conbuildmat.2017.04.069
- Hewlett, P., Liska, M. (Eds.). (2019). Lea's Chemistry of Cement and Concrete, Chapter 11, Microsilica as an Addition Butterworth-Heinemann.
- Hooton, R.D. (1993). Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali-silica reactivity, ACI Materials Journal, 90(2), 143-151.
- Juenger, M.C.G., Ostertag, C.P. (2004). Alkali-silica reactivity of large silica fume-derived particles, Cement and Concrete Research, 34(8), 1389-1402. https://doi.org/10.1016/j.cemconres.2004.01.001
- KS A 0094:2014 (2014). Determination of the Specific Surface Area of Powders(solids) by Gas Adsorption Method [in Korean].
- KS F 2405:2010 (2017). Standard Test Method for Compressive Strength of Concrete [in Korean].
- KS F 2436:2017 (2017). Standard Test Method for Setting Times of Concrete Mixture by Penetration Resistance [in Korean].
- KS F 2567:2009 (2009). Silica Fume for Use in Concrete [in Korean].
- KS F 2711:2017 (2017). Standard Test Method for Resistance of Concrete to Chloride Ion Penetration by Electrical Conductance [in Korean].
- KS L 5110:2001 (2016). Testing Method for Specific Gravity of Hydraulic Cement [in Korean].
- KS L 5111:2017 (2017). Flow Table for Use in Tests of Hydraulic Cement [in Korean].
- Page, C.L., Vennesland, O. (1983). Pore solution composition and chloride binding capacity of silica-fume cement pastes, Materiaux et Construction, 16(1), 19-25. https://doi.org/10.1007/BF02474863
- Poon, C.S., Kou, S.C., Lam, L. (2006). Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete, Construction and building materials, 20(10), 858-865. https://doi.org/10.1016/j.conbuildmat.2005.07.001
- Pourbaix, M. (1974). Atlas of Electrochemical Equilibria in Aqueous Solutions, National Association of Corrosion Engineers, Houston, TX.
- Provis, J.L., Van Deventer, J.S. (Eds.). (2013). Alkali activated materials: state-of-the-art report, RILEM TC 224-AAM (Vol. 13). Chapter 8. Durability and Testing - Chemical Matrix Degradation Process, Springer Science & Business Media.
- Rossen, J.E., Lothenbach, B., Scrivener, K.L. (2015). Composition of C-S-H in pastes with increasing levels of silica fume addition, Cement and Concrete Research, 75, 14-22. https://doi.org/10.1016/j.cemconres.2015.04.016
- Sanjuan, M.A., Argiz, C., Galvez, J.C., Moragues, A. (2015). Effect of silica fume fineness on the improvement of portland cement strength performance, Construction and Building Materials, 96, 55-64. https://doi.org/10.1016/j.conbuildmat.2015.07.092
- Siddique, R., Chahal, N. (2011). Use of silicon and ferrosilicon industry by-products (silica fume) in cement paste and mortar, Resources, Conservation and Recycling, 55(8), 739-744. https://doi.org/10.1016/j.resconrec.2011.03.004
- Wang, X., Huang, J., Ma, B., Dai, S., Jiang, Q., Tan, H. (2019). Effect of mixing sequence of calcium ion and polycarboxylate superplasticizer on dispersion of a low grade silica fume in cement-based materials, Construction and Building Materials, 195, 537-546. https://doi.org/10.1016/j.conbuildmat.2018.11.032
- Wongkeo, W., Thongsanitgarn, P., Ngamjarurojana, A., Chaipanich, A. (2014). Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume, Materials & Design, 64, 261-269. https://doi.org/10.1016/j.matdes.2014.07.042