참고문헌
- Menzies, R., "Computational Investigation of Flows in Diffusing S-Shaped Intakes," Acta 76. Polytechnia, Vol. 41, No. 4-5. 2001, pp.61-67.
- Menzies, R., "Investigation of S-shaped Intake Aerodynamics using Computational Fluid Dynamics," Ph. D. thesis, Department of Aerospace Engineering, University of Glasgaw, 2002.
- Reichert, B. A., and Wendt, B. J., "Improving Curved Subsonic Diffuser Performance with Vortex Generators," AIAA Journal, Vol. 34, No. 1, 1996, pp.65-72. https://doi.org/10.2514/3.13022
- Jirasek, A., "Design of Vortex Generator Flow Control in Inlets," Journal of Aircraft, Vol. 43, No. 6, 2006, pp.1886-1892. https://doi.org/10.2514/1.21364
- Yi, J., Lee, B., and Kim, C., "Design Optimization of Vortex Generator for Controlling Flows inside subsonic Diffusing S-duct," Proceeding of The Korean Society for Aeronautical and Space Science Fall Conference. November 2011, pp.294-299.
- Sullerey, R. K., Mishra, S., Pradeep, A. M., "Application of boundary layer fences and vortex generators in improving performance of S-Duct diffuser," Journal of Fluid Engineering, Vol. 124, No. 1, 2002 pp.136-142. https://doi.org/10.1115/1.1436096
- Choe, Y., and Kim, C., "Numerical Study on Performance of Supersonic Inelt under Various Bleed Conditions," Proceeding of The Korean Society for Aeronautical and Space Sciences Fall Conference, November 2014, pp.44-47.
- Debiasi, M., Herberg, M. R., Yan, Z., Dhanabalan, S. S., and Tsai, H. M., "Control of Flow Separation in S-ducts via Flow Injection and Suction," AIAA Aerospace Science meeting and Exhibition, 46th, January 2008.
- Scribben, A. R., NG, W., and Burdisso, R., "Effectiveness of a Serpentine Inlet Duct Flow Control Technique at Design and Off-Design Simulated Flight Conditions," ASME, Vol. 128, 2006, pp.332-339.
- Ball, W. H., "Test of Wall Suction and Blowing in Highly Offset Diffusers," AIAA, Vol. 22, No. 3, 1985, pp.161-167.
- Keerthi, M. C., and Kushari. A, "Effectiveness of vortex generator jets and wall suction on separated flows in serpentine-duct diffuser," Aerospace Science and Technology, Vol. 34, April 2014, pp.12-19 https://doi.org/10.1016/j.ast.2014.01.013
- Berens, T. M., Delot, A., Chevalier, M., Muijden, J. V., Waaijer, R. A., and Tattersall, P., "Garteur AD/AG-43 Application of CFD High Offset intake diffusers." GARTEUR Final Report, 2012.
- Menter, F. R., "Two-equation eddy viscosity turbulence models for engineering applications," AIAA Journal, Vol.32, No. 8, 1994, pp.1598-1605. https://doi.org/10.2514/3.12149
- Lee, J., and Cho, J., "Effect of aspect ratio of elliptical inlet shape on performance of subsonic diffusing S-duct," Journal of Mechanical Science ant Technology, Vol. 32, Issue. 3, March 2018, pp. 1153-1160 https://doi.org/10.1007/s12206-018-0218-5
- May, N. E., "The Prediction of Intake/S-bend Diffuser Flow using Varidus Two-Equation Turbulence Model Variants, Including Non-Linear Eddy Viscosity Formulations," ARA. Contractor Report M316/1, March 1997.
- AGARD, "Air Intakes for high Speed Vehicles," AGARD ADVISORY 270, Fluid Dynamics Panel Working Group 13, 1991.
- THYE, N. Y., "A Study of the Flow in and S-shaped Duct," ph. D. thesis, Department of mechanical engineering, National University of Singapore, 2009.