DOI QR코드

DOI QR Code

Seismic investigation of pushover methods for concrete piers of curved bridges in plan

  • Ahmad, Hamid Reza (Department of Civil Engineering, Faculty of Engineering, University of Maragheh) ;
  • Namdari, Nariman (Department of Civil Engineering, Bandar Abbas Branch, Islamic Azad University) ;
  • Cao, Maosen (Department of Engineering Mechanics, Hohai University) ;
  • Bayat, Mahmoud (Department of Civil and Environmental Engineering, University of Pittsburgh)
  • 투고 : 2018.10.10
  • 심사 : 2018.12.30
  • 발행 : 2019.01.25

초록

The use of non-linear analysis of structures in a functional way for evaluating the structural seismic behavior has attracted the attention of the engineering community in recent years. The most commonly used functional method for analysis is a non-linear static method known as the "pushover method". In this study, for the first time, a cyclic pushover analysis with different loading protocols was used for seismic investigation of curved bridges. The finite element model of 8-span curved bridges in plan created by the ZEUS-NL software was used for evaluating different pushover methods. In order to identify the optimal loading protocol for use in astatic non-linear cyclic analysis of curved bridges, four loading protocols (suggested by valid references) were used. Along with cyclic analysis, conventional analysis as well as adaptive pushover analysis, with proven capabilities in seismic evaluation of buildings and bridges, have been studied. The non-linear incremental dynamic analysis (IDA) method has been used to examine and compare the results of pushover analyses. To conduct IDA, the time history of 20 far-field earthquake records was used and the 50% fractile values of the demand given the ground motion intensity were computed. After analysis, the base shear vs displacement at the top of the piers were drawn. Obtained graphs represented the ability of a cyclic pushover analysis to estimate seismic capacity of the concrete piers of curved bridges. Based on results, the cyclic pushover method with ISO loading protocol provided better results for evaluating the seismic investigation of concrete piers of curved bridges in plan.

키워드

과제정보

연구 과제 주관 기관 : International Science and technology cooperation

참고문헌

  1. ACI (2005), Acceptance Criteria for Moment Frames Based on Structural Testing, ACI, USA.
  2. Alkayem, N.F., Cao, M., Zhang, Y., Bayat, M. and Su, Z. (2018), "Structural damage detection using finite element model updating with evolutionary algorithms: a survey", Neur. Comput. Appl., 30(2), 389-411 https://doi.org/10.1007/s00521-017-3284-1
  3. AmiriHormozaki, E., Pekcan, G. and Itani, A. (2015), "Analytical fragility functions for horizontally curved steel I-girder highway bridges", Earthq. Spectra, 31(4), 2235-2254. https://doi.org/10.1193/022213EQS049M
  4. Anastasopoulos, I., Kourkoulis, R., Gelagoti, F. and Papadopoulos, E. (2012), "Rocking response of SDOF systems on shallow improved sand: An experimental study", Soil Dyn. Earthq. Eng., 40, 15-33. https://doi.org/10.1016/j.soildyn.2012.04.006
  5. Antoniou, S. and Pinho, R. (2004a), "Advantages and limitations of adaptive and non-adaptive force-based pushover procedures", J. Earthq. Eng., 8(4), 497-522. https://doi.org/10.1080/13632460409350498
  6. Antoniou, S. and Pinho, R. (2004b), "Development and verification of a displacement-based adaptive pushover procedure", J. Earthq. Eng., 8(5), 643-661. https://doi.org/10.1080/13632460409350504
  7. ATC, A. (1996), 40, Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, Report ATC-40, Redwood City, USA.
  8. Bayat, M., Daneshjoo, F. and Nistico, N. (2015), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. https://doi.org/10.12989/sem.2015.55.6.1177
  9. Bayat, M., Daneshjoo, F. and Nistico, N. (2017a), "The effect of different intensity measures and earthquake directions on the seismic assessment of skewed highway bridges", Earthq. Eng. Eng. Vib., 16(1), 165-179. https://doi.org/10.1007/s11803-017-0375-z
  10. Bayat, M., Daneshjoo, F., Nistico, N. and Pejovic, J. (2017b), "Seismic evaluation of isolated skewed bridges using fragility function methodology", Comput. Concrete, 20(4), 419-427. https://doi.org/10.12989/cac.2017.20.4.419
  11. Bozorgnia, Y. and Bertero, V.V. (2004), Earthquake Engineering: from Engineering Seismology to Performance-based Engineering, CRC Press.
  12. Burdette, N.J., Elnashai, A.S., Lupoi, A. and Sextos, A.G. (2008a), "Effect of asynchronous earthquake motion on complex bridges. I: Methodology and input motion", J. Bridge Eng., 13(2), 158-165. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:2(158)
  13. Burdette, N.J., Elnashai, A.S., Lupoi, A. and Sextos, A.G. (2008b), "Effect of asynchronous earthquake motion on complex bridges. I: Methodology and input motion", J. Bridge Eng., 13(2), 158-165. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:2(158)
  14. Caltrans, S.D.C. (2010), "Caltrans seismic design criteria version 1.6", California Department of Transportation, Sacramento, USA.
  15. Chopra, A.K. (2016), Dynamics of Structures: Theory and Applications to Earthquake Engineering, 5th Edition, Prentice-hall International Series, USA.
  16. Chou, C.C. and Chen, J.H. (2011), "Analytical model validation and influence of column bases for seismic responses of steel post-tensioned self-centering MRF systems", Eng. Struct., 33(9), 2628-2643. https://doi.org/10.1016/j.engstruct.2011.05.011
  17. Code, P. (2005), Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels.
  18. Council, B.S.S. (2000), FEMA 356-Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Washington DC: Federal Emergency Management Agency, USA.
  19. Desantiago, E., Mohammadi, J. and Albaijat, H.M. (2005), "Analysis of horizontally curved bridges using simple finite-element models", Pract. Period. Struct. Des. Constr., 10(1), 18-21. https://doi.org/10.1061/(ASCE)1084-0680(2005)10:1(18)
  20. Elnashai, A.S., Papanikolaou, V. and Lee, D.H. (2010), ZEUS-NL, University of Illinois at Urbana-Champaign, Mid-America Earthquake Center, USA.
  21. Faal, H.N. and Poursha, M. (2017), "Applicability of the N2, extended N2 and modal pushover analysis methods for the seismic evaluation of base-isolated building frames with lead rubber bearings (LRBs)", Soil Dyn. Earthq. Eng., 98, 84-100. https://doi.org/10.1016/j.soildyn.2017.03.036
  22. Federal Emergency Management Agency (FEMA) (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Report FEMA, 273, USA.
  23. FEMA, F. (2007), 461-Interim Protocols for Determining Seismic Performance Characteristics of Structural and Nonstructural Components Through Laboratory Testing, Federal Emergency Management Agency (FEMA), Washington DC, USA.
  24. Gidaris, I. and Taflanidis, A.A. (2013), "Parsimonious modeling of hysteretic structural response in earthquake engineering: Calibration/validation and implementation in probabilistic risk assessment", Eng. Struct., 49, 1017-1033. https://doi.org/10.1016/j.engstruct.2012.12.030
  25. Hashemi, A. and Loth, F. (2014), "Transition to turbulence in curved pipe", APS Meeting Abstracts, November.
  26. Hashemi, A., Eshraghi, M. and Felicelli, S. (2015), "A three-dimensional multi-mesh lattice boltzmann model for multiphysics simulations", APS Division of Fluid Dynamics Meeting Abstracts, November.
  27. Hashemi, A., Fischer, P.F. and Loth, F. (2018), "Direct numerical simulation of transitional flow in a finite length curved pipe", J. Turbul., 19(8), 664-682. https://doi.org/10.1080/14685248.2018.1497293
  28. Jeon, J.S., Shafieezadeh, A., Lee, D.H., Choi, E. and DesRoches, R. (2015), "Damage assessment of older highway bridges subjected to three-dimensional ground motions: characterization of shear-axial force interaction on seismic fragilities", Eng. Struct., 87, 47-57. https://doi.org/10.1016/j.engstruct.2015.01.015
  29. Kia, M., Banazadeh, M. and Bayat, M. (2018), "Rapid seismic vulnerability assessment by new regression-based demand and collapse models for steel moment frames", Earthq Struct., 14(3), 203-214. https://doi.org/10.12989/EAS.2018.14.3.203
  30. Krawinkler, H. (1992), "Guidelines for cyclic seismic testing of components of steel structures", Applied Technology Council, Redwood City, Calif, USA.
  31. Krawinkler, H. and Seneviratna, G.D.P.K. (1998), "Pros and cons of a pushover analysis of seismic performance evaluation", Eng. Struct., 20(4-6), 452-464. https://doi.org/10.1016/S0141-0296(97)00092-8
  32. Luo, J., Fahnestock, L.A. and LaFave, J.M. (2017), "Nonlinear static pushover and eigenvalue modal analyses of quasi-isolated highway bridges with seat-type abutments", Struct., 12, 145-167. https://doi.org/10.1016/j.istruc.2017.08.006
  33. Mahdavi, N., Ahmadi, H.R. and Mahdavi, H. (2012), "A comparative study on conventional push-over analysis method and incremental dynamic analysis (IDA) approach", Sci. Res. Essay., 7(7), 751-773.
  34. Mander, J.B., Priestley, M.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  35. Martinez-Rueda, J.E. and Elnashai, A.S. (1997), "Confined concrete model under cyclic load", Mater. Struct., 30(3), 139-147. https://doi.org/10.1007/BF02486385
  36. Naghadehi, M.Z. and Mikaeil, R. (2017), "Optimization of tunnel boring machine (TBM) disc cutter spacing in jointed hard rock using a distinct element numerical simulation", Periodica Polytechnica Civil Eng., 61(1), 56-65.
  37. Naghadehi, M.Z., Benardos, A., Javdan, R., Tavakoli, H. and Rojhani, M. (2016), "The probabilistic time and cost risk analysis of a challenging part of an urban tunneling project", Tunnel. Underg. Space Technol., 58, 11-29. https://doi.org/10.1016/j.tust.2016.04.007
  38. Naghadehi, M.Z., Jimenez, R., KhaloKakaie, R. and Jalali, S.M.E., (2011), "A probabilistic systems methodology to analyze the importance of factors affecting the stability of rock slopes", Eng. Geology, 118(3-4), 82-92. https://doi.org/10.1016/j.enggeo.2011.01.003
  39. Next Generation Attenuation of Ground Motions (Nga) Project (2006), http://Peer.Berkeley.Edu/nga/ (Accessed 10 October 2006)
  40. Oinam, R.M., Sugumar, R. and Sahoo, D.R. (2017), "A comparative study of seismic performance of RC frames with masonry in fills", Procedia Eng., 173, 1784-1791. https://doi.org/10.1016/j.proeng.2016.12.220
  41. Panyakapo, P. (2014), "Cyclic pushover analysis procedure to estimate seismic demands for buildings", Eng. Struct., 66, 10-23. https://doi.org/10.1016/j.engstruct.2014.02.001
  42. Purba, R. and Bruneau, M. (2015), "Experimental investigation of steel plate shear walls with in-span plastification along horizontal boundary elements", Eng. Struct., 97, 68-79. https://doi.org/10.1016/j.engstruct.2015.04.008
  43. SEAOC (1995), Performance Based Seismic Engineering of Buildings, Structural Engineers Association of California, Sacramento, California, USA.
  44. Sobhan, M.S., Rofooei, F.R. and Attari, N.K. (2017), "Buckling behavior of the anchored steel tanks under horizontal and vertical ground motions using static pushover and incremental dynamic analyses", Thin Wall. Struct., 112, 173-183. https://doi.org/10.1016/j.tws.2016.12.022
  45. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  46. Vamvatsikos, D. and Cornell, C.A. (2004), "Applied incremental dynamic analysis", Earthq. Spectra, 20(2), 523-553. https://doi.org/10.1193/1.1737737

피인용 문헌

  1. A Nonlinear Static Procedure for the Seismic Design of Symmetrical Irregular Bridges vol.2020, 2019, https://doi.org/10.1155/2020/8899705
  2. Seismic investigation of cyclic pushover method for regular reinforced concrete bridge vol.78, pp.1, 2019, https://doi.org/10.12989/sem.2021.78.1.041