References
- J. H. Kim, W. J. Kim, and T. S. Oh, "Thermoelectric Thin Film Devices for Energy Harvesting with the Heat Dissipated from High-power Light-emitting Diodes", J. Electron. Mater., 45(7), 3410 (2016). https://doi.org/10.1007/s11664-016-4485-6
- R. J. M. Vullers, R. van Schaijk, I. Doms, C. Van Hoof, and R. Mertens, "Micropower Energy Harvesting", Solid-State Electron., 53, 684 (2009). https://doi.org/10.1016/j.sse.2008.12.011
- T. Huesgen, P. Woias, and N. Kockmann, "Design and Fabrication of MEMS Thermoelectric Generators with High Temperature Efficiency". Sens. Actuators A, 145-146, 423 (2008). https://doi.org/10.1016/j.sna.2007.11.032
- W. Wang, V. Cionca, N. Wang, M. Hayes, B. O'Flynn, and C. O'Mathuna, "Thermoelectric Energy Harvesting for Building Energy Management Wireless Sensor Networks", Inter. J. Distrib. Sens. Netw., 2013, 232438 (2013). https://doi.org/10.1155/2013/232438
- W. Glatz, S. Muntwyler, and C. Hierold, "Optimization and Fabrication of Thick Flexible Polymer Based Micro Thermoelectric Generator", Sens. Actuators A, 132, 337 (2006). https://doi.org/10.1016/j.sna.2006.04.024
- A. Sharma, J. H. Lee, K. H. Kim, and J. P. Jung, "Recent Advances in Thermoelectric Power Generation Technology", J. Microelectron. Packag. Soc., 24(1), 9 (2017). https://doi.org/10.6117/kmeps.2017.24.1.009
- T. S. Oh, "Fabrication Process and Power Generation Characteristics of Thermoelectric Thin Film Devices for Micro Energy Harvesting", J. Microelectron. Packag. Soc., 25(3), 67 (2018). https://doi.org/10.6117/KMEPS.2018.25.3.067
- W. J. Kim, and T. S. Oh, "Comparison of Thermal Energy Harvesting Characteristics of Thermoelectric Thin-Film Modules with Different Thin-Film Leg Diameters", J. Microelectron. Packag. Soc., 25(4), 67 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.067
- K. J. Shin, and T. S. Oh, "Micro-Power Generation Characteristics of Thermoelectric Thin Film Devices Processed by Electrodeposition and Flip-Chip Bonding", J. Electron. Mater., 44(6), 2026 (2015). https://doi.org/10.1007/s11664-015-3647-2
-
K. J. Shin, and T. S. Oh, "Thermoelectric Power-Generation Characteristics of a Thin-Film Device Processed by the Flip-Chip Bonding of
$Bi_2Te_3$ and$Sb_2Te_3$ Thin-Film Legs Using an Anisotropic Conductive Adhesive", Mater. Trans., 56(10), 1719 (2015). https://doi.org/10.2320/matertrans.M2015236 - V. Leonov, T. Torfs, P. Fiorini, and C. Van Hoof, "Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes", IEEE Sens. J., 7(5), 650 (2007). https://doi.org/10.1109/JSEN.2007.894917
- K. S. Han, and T. S. Oh, "Power Generation Properties and Bending Characteristics of a Flexible Thermoelectric Module Fabricated using PDMS Filling Method", submitted to J. Microelectron. Packag. Soc. (2019).
- D. Park and T. S. Oh, "Interfacial Adhesion Enhancement Process of Local Stiffness-Variant Stretchable Substrates for Stretchable Electronic Packages", J. Microelectron. Packag. Soc., 25(4), 111 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.111
- D. Park, and T. S. Oh, "Flip Chip Process on the Local Stiffness- Variant Stretchable Substrate for Stretchable Electronic Packages", J. Microelectron. Packag. Soc., 25(4), 155 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.155
- J. H. Ahn, and J. H. Je, "Stretchable Electronics: Materials, Architectures and Integrations", J. Phys. D: Appl. Phys., 45, 102001 (2012).
- D. H. Kim, and J. A. Rogers, "Stretchable Electronics: Materials Strategies and Devices", Adv. Mater., 20, 4887 (2008). https://doi.org/10.1002/adma.200801788
- S. H. Lee, H. Shen, and S. Han, "Flexible Thermoelectric Module Using Bi-Te and Sb-Te Thin Films for Temperature Sensors", J. Electron. Mater., 48(9), (2019).
- Y. Du, J. Xu, B. Paul, and P. Eklund, "Flexible Thermoelectric Materials and Devices", Appl. Mater. Today, 12, 366 (2018). https://doi.org/10.1016/j.apmt.2018.07.004
- S. Zhang, Z. Fan, X. Wang, Z. Zhang, and J. Ouyang, "Enhancement of the Thermoelectric Properties of PEDOT:PSS via One-Step Treatment with Cosolvents or Their Solutions of Organic Salts", J. Mater. Chem., A6, 7080 (2018).
- R. Maeda, H. Kawakami, Y. Shinohara, I. Kanazawa, and M. Mitsuishi, "Thermoelectric Properties of PEDOT/PSS Films Prepared by a Gel-Film Formation Process", Mater. Lett., 251, 169 (2019). https://doi.org/10.1016/j.matlet.2019.05.005
- D. Park, and T. S. Oh, "Flip Chip Process on the Local Stiffness- Variant Stretchable Substrate for Stretchable Electronic Packages", J. Microelectron. Packag. Soc., 25(4), 155 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.155
-
T. S. Oh, D. B. Hyun, and N. V. Kolomoets, "Thermoelectric Properties of the Hot-Pressed
$(Bi,Sb)_2(T3,Se)_3$ Alloys", Scripta Meter., 42, 849 (2000). https://doi.org/10.1016/S1359-6462(00)00302-X -
H. J. Kim, H. C. Kim, D. B. Hyun, and T. S. Oh, "Thermoelectric Properties of p-Type
$(Bi,Sb)_2Te_3$ Alloys Fabricated by the Hot Pressing Method", Met. Mater., 4(1), 75 (1998). https://doi.org/10.1007/BF03026068 -
B. Y. Jung, T. S. Oh, D. B. Hyun, and J. D. Shim, "Thermoelectric Properties of
$(Bi_{0.25}Sb_{0.75})_2Te_3$ Prepared by Mechanical Allying and Hot Pressing", J. Korean Phys. Soc., 31(1), 219 (1997). -
H. C. Kim, B. Y. Jung, D. B. Hyun, and T. S. Oh, "Mechanical Alloying Process and Thermoelectric Properties of p-Type
$(Bi_{1-x}Sb_x)_2Te_3$ ", J. Korean Inst. Met. Mater., 36(3), 416 (1998). -
B. Y. Jung, T. S. Oh, S. E. Nam, D. B. Hyun, and J. D. Shim, "Thermoelectric Properties of p-Type
$(Bi_{0.25}Sb_{0.75})_2Te_3$ Fabricated by Mechanical Allying Process", J. Korean Inst. Met. Mater., 35(1), 153 (1997). -
D. B. Hyun, J. S. Hwang, J. D. Shim, and T. S. Oh, "Thermoelectric Properties of
$(Bi_{0.25}Sb_{0.75})_2Te_3$ Alloys Fabricated by Hot-Pressing Method", J. Mater. Sci., 36, 1285 (2001). https://doi.org/10.1023/A:1004862700211 -
H. J. Kim, T. S. Oh, and D. B. Hyun, "Thermoelectric Properties of the Hot-Pressed
$Bi_2(Te_{1-x}Se_x)_3$ Alloys with the$Bi_2Se_3$ Content", Korean J. Mater. Res., 8(5), 408 (1998). -
H. J. Kim, J. S. Choi, D. B. Hyun, and T. S. Oh, "Powder Characteristics and Thermoelectric Properties of n-Type
$Bi_2(Te_{0.95}Se_{0.05})_3$ Fabricated by Mechanical Alloying Process", J. Korean Inst. Met. Mater., 35(2), 223 (1997). -
H. J. Kim, J. S. Choi, D. B. Hyun, and T. S. Oh, "Microstructure and Thermoelectric Properties of n-Type
$Bi_2(Te_{0.95}Se_{0.05})_3$ Fabricated by Mechanical Alloying Process and Hot Pressing Methods", Korean J. Mater. Res., 7(1), 40 (1997). - J. Y. Choi, D. W. Park, and T. S. Oh, "Variation of Elastic Stiffness of Polydimethylsiloxane (PDMS) Stretchable Substrates for Wearable Packaging Applications", J. Microelectron. Packag. Soc., 21(4), 125 (2014). https://doi.org/10.6117/kmeps.2014.21.4.125
- I. D. Johnston, D. K. McCluskey, C. K. L. Tan, and M. C. Tracey, "Mechanical Characterization of Bulk Sylgard 184 for Microfluidics and Microengineering", J. Micromech. Microeng., 24, 035017 (2014). https://doi.org/10.1088/0960-1317/24/3/035017
- I. Wong, and C. M. Ho, "Surface Molecular Property Modifications for Poly(dimethylsilicone) (PDMS) Based Microfluidic Devices", Microfluid Nanofluid, 7, 291 (2009). https://doi.org/10.1007/s10404-009-0443-4
- F. Schneider, T. Fellner, J. Wilde and U. Wallrabe, "Mechanical Properties of Silicones for MEMS", J. Micromech. Microeng., 18, 065008 (2008). https://doi.org/10.1088/0960-1317/18/6/065008
- K. Khanafer, A. Duprey, M. Schlicht, and R. Berguer, "Effects of Strain Rate, Mixing Ratio, and Stress-Strain Definition on the Mechanical Behavior of the Polydimethylsiloxane (PDMS) Materials as Related to Its Biological Applications", Biomed Microdevices, 11, 503 (2009). https://doi.org/10.1007/s10544-008-9256-6
- J. H. Seo, K. Sakai, and N. Yui, "Adsorption State of Fibronectin on Poly(dimethylsiloxane) Surfaces with Varied Stiffness Can Dominate Adhesion Density of Fibroblasts", Acta Biomater., 9(3), 5493 (2013). https://doi.org/10.1016/j.actbio.2012.10.015