DOI QR코드

DOI QR Code

A comparative study on the flow patterns in closed loop pulsating heat pipe charged with various working fluids

다양한 작동유체로 충전된 폐쇄 루프 맥동 히트파이프 내부 유동패턴 비교

  • Kang, Seok Gu (Department of Mechanical Engineering, Chosun University) ;
  • Kim, Seong Keun (Department of Mechanical Engineering, Chosun University) ;
  • Ahmad, Hibal (Department of Mechanical Engineering, Chosun University) ;
  • Jung, Sung Yong (Department of Mechanical Engineering, Chosun University)
  • Received : 2019.12.04
  • Accepted : 2019.12.27
  • Published : 2019.12.31

Abstract

Thermal performance and flow patterns inside the closed loop pulsating heat pipe (CLPHP) were experimentally investigated. For investigating the effect of working fluids, CLPHP was filled with various working fluids including methanol, acetone and ethanol. The thermal resistance was calculated by temperatures in evaporator and condenser and flow patterns were visualized by a digital camera. The thermal resistances for all fluids were decreased as the heat increases. Flow patterns change from static slug to elongated slug flows, bulk circulation and annular flows as the heat increases. Dry-out occurs after annular flows. For reasonable comparison of thermal performances, normalized CHF, Kutateladze number (Ku), was compared. Even though ethanol has smallest CHF, Ku of ethanol is similar with that of methanol. In addition, acetone has the highest Ku that means CLPHP with acetone provides the higher thermal performance compared with CLPHP with other fluids.

Keywords

References

  1. Akachi, F. P. H. & Stulc, P., 1996, "Pulsating heat pipes," Proceedings of the 5th International Heat Pipe Symposium, pp. 208-217.
  2. Groll, S. K. M., 2002, "Pulsating heat pipes: a challenge and still unsolved problem in heat pipe science," Archives of Thermodynamics, Vol. 23, pp. 17-28.
  3. Pastukhov, V. G., Maidanik, Y. F. & Vershinin, C. V., 2003, "Miniature loop heat pipes for electronics cooling," Applied Thermal Engineering, Vol. 23, pp. 1125-1135. https://doi.org/10.1016/S1359-4311(03)00046-2
  4. Saha, P., Ishii, M. & Zuber, N., 1976, "An experimental investigation of the thermally induced flow oscillations in two-phase systems," Journal of Heat Transfer, Vol. 98, pp. 616-622. https://doi.org/10.1115/1.3450609
  5. Zuo, Z. J., North, M. T. & Wert, K. L., 2001, "High heat flux heat pipe mechanism for cooling of electronics," IEEE Transactions on Components and Packaging Technologies, Vol. 24, pp. 220-225. https://doi.org/10.1109/6144.926386
  6. Burban, G., Ayel, V. & Alexandre, A., 2013, "Experimental investigation of a pulsating heat pipe for hybrid vehicle applications," Applied Thermal Engineering, Vol. 50, pp.
  7. Kargar, S. A. H., Ghiasi, M. & Jahangiri, M. S., 2013, "A novel integrated solar desalination system with a pulsating heat pipe," Desalination, Vol. 311, pp. 206-210. https://doi.org/10.1016/j.desal.2012.10.029
  8. Mangini, D., Mameli, M. & Georgoulas, A., 2015, "A pulsating heat pipe for space applications: Ground and microgravity experiments," International Journal of Thermal Sciences, Vol. 95, pp. 53-63. https://doi.org/10.1016/j.ijthermalsci.2015.04.001
  9. Yang, H., Khandekar, S. & Groll, M., 2009, "Performance characteristics of pulsating heat pipes as integral thermal spreaders," International Journal of Thermal Sciences, Vol. 48, pp. 815-824. https://doi.org/10.1016/j.ijthermalsci.2008.05.017
  10. Goshayeshi, H. R., Goodarzi, M. & Safaei, M. R., 2016, "Experimental study on the effect of inclination angle on heat transfer enhancement of a ferrofluid in a closed loop oscillating heat pipe under magnetic field," Experimental Thermal and Fluid Science, Vol. 74, pp. 265-270. https://doi.org/10.1016/j.expthermflusci.2016.01.003
  11. Xue, Z. & Qu, W., 2014, "Experimental study on effect of inclination angles to ammonia pulsating heat pipe," Chinese Journal of Aeronautics, Vol. 27, pp. 1122-1127. https://doi.org/10.1016/j.cja.2014.08.004
  12. Yang, H., Khandekar, S. & Groll, M., 2008, "Operational limit of closed loop pulsating heat pipes," Applied Thermal Engineering, Vol. 28, pp. 49-59. https://doi.org/10.1016/j.applthermaleng.2007.01.033
  13. Khandekar, S., Gautam, A. P. & Sharma, P. K., 2009, "Multiple quasi-steady states in a closed loop pulsating heat pipe," International Journal of Thermal Sciences, Vol. 48, pp. 535-546. https://doi.org/10.1016/j.ijthermalsci.2008.04.004
  14. Lips, S., Bensalem,A. & Bertin,Y., 2010, "Experimental evidences of distinct heat transfer regimes in pulsating heat pipes (PHP)," Applied Thermal Engineering, Vol. 30, pp. 900-907. https://doi.org/10.1016/j.applthermaleng.2009.12.020
  15. Mameli, M., Marengo, M. & Khandekar, S., 2014, "Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe," International Journal of Thermal Sciences, Vol. 75, pp. 140-152. https://doi.org/10.1016/j.ijthermalsci.2013.07.025
  16. Tong, B. Y., Wong, T. N. & Ooi, K. T., 2001, "Closed-loop pulsating heat pipe," Applied Thermal Engineering, Vol. 21, pp. 1845-1862. https://doi.org/10.1016/S1359-4311(01)00063-1
  17. Xu. J. L., Li, Y. X. & Wong, T. N., 2005, "High speed flow visualization of a closed loop pulsating heat pipe," International Journal of Heat and Mass Transfer, Vol. 48, pp. 3338-3351. https://doi.org/10.1016/j.ijheatmasstransfer.2005.02.034
  18. Kim, Y. B., Song, H. W. & J. Sung, 2018, "Flow Behavior of Rapid Thermal Oscillation Inside an Asymmetric Micro Pulsating Heat Exchanger," International Journal of Heat and Mass Transfer, Vol. 120, pp. 923-929. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.101
  19. Yang, K.S., Cheng, Y.C. & Liu, M.C., 2015, "Micro pulsating heat pipes with alternate microchannel widths," Applied Thermal Engineering, Vol. 83, pp. 131-138. https://doi.org/10.1016/j.applthermaleng.2015.03.020
  20. Yoon, A. & Kim, S. J., 2017, "Characteristics of oscillating flow in a micro pulsating heat pipe: Fundamental-mode oscillation," International Journal of Heat and Mass Transfer, Vol. 109, pp. 242-253. https://doi.org/10.1016/j.ijheatmasstransfer.2017.02.003
  21. Yoon, A. & Kim, S. J., 2019 "Experimental and theoretical studies on oscillation frequencies of liquid slugs in micro pulsating heat pipes," Energy Conversion and Management, Vol. 181, pp. 48-58. https://doi.org/10.1016/j.enconman.2018.11.060