DOI QR코드

DOI QR Code

Experimental Study on the Development of EMP Shielded Concrete Using Industrial By-products

산업부산물을 사용한 EMP차폐 콘크리트 개발에 관한 실험적 연구

  • Received : 2019.10.02
  • Accepted : 2019.11.04
  • Published : 2019.12.20

Abstract

The purpose of this study is to present basic data for developing concrete with EMP shielding as the structure materials when constructing an EMP shielded building structure. In order to use metal-based recycled aggregates with excellent conductivity and easy procurement for EMP shielding concrete, an evaluation of the stability evaluation and EMP shielding performance was performed. Through the stability evaluation, it was found that the coarse aggregate stability criterion was satisfied, but the oxidized slag did not satisfy the fine aggregate stability criterion, the oxidized slag is not satisfied. In addition, as a result of fresh concrete, the workability is increased and the air volume is decreased. The compressive strength is increased due to the high density and coarse granularity of the recycled aggregates, which increased the cement paste and adhesion, thereby increasing the compressive strength. The results of an EMP shielding test show that aggregates with high shielding performance are electronic arc furnace(EAF) Oxidizing Slag and Cooper Slag. The shielding performance is expected to increase if the average particle size of aggregate is small or uniformly distributed.

본 연구에서는 EMP차폐 건축구조물 구축시 구조체 자체로써 EMP차폐성능을 발현하는 콘크리트를 개발하기 위한 기초적인 자료를 제시하고자 도전성이 우수하고 조달이 쉬운 금속계열 산업부산물을 EMP차폐용 콘크리트 골재로 사용하기 위해 골재의 안정성 평가 및 EMP차폐 성능평가를 실시하였다. 안정성 평가결과 굵은골재 안정성기준에 만족하였으나 잔골재 안정성 기준에의 경우 전기로산화슬래그는 만족하지 못하였다. 또한 콘크리트의 물성평가 결과 유동성은 증가하는 것으로 나타났으며 공기량이 감소되는 것으로 사료되며. 압축강도는 산업부산물 골재의 높은 밀도와 거친 입형을 가지기 때문에 시멘트 페이스트와 부착력이 증가하여 강도 또한 증가하는 것으로 나타났다. EMP차폐 실험결과 차폐성능이 높은 산업부산물 골재는 전기로산화슬래그와 동제련슬래그 이며 골재의 평균입경이 작거나 균일하게 분포되면 차폐성능은 증가할 것으로 사료된다.

Keywords

References

  1. Choi HJ. An experimental study on the development of electromagnetic shielding concrete wall for shielding high-altitude electromagnetic pulse (HEMP). Journal of the Korea Concrete Institute. 2017 Apr;29(2):169-177. https://doi.org/10.4334/JKCI.2017.29.2.169
  2. Kim KJ. Method for judging the EMP protection plan and required level through decision making. Journal of the Korea Institute of building Construction. 2019 Apr;19(2):193-200. https://doi.org/10.5345/JKIBC.2019.19.2.193
  3. Seo MJ. Electromagnetic wave shielding effectiveness measurement method of EMP protection facility. The Journal of Korean Institute of Electromagnetic Engineering and Science. 2014 May;25(5):548-58. http://dx.doi.org/10.5515/KJKIEES.2014.25.5.548
  4. Kim HG, Lee HK. Development of electromagnetic wave absorbing/shielding construction materials. Magazine of the Korea Concrete Institute. 2008 Nov;20(6):70-4. https://doi.org/10.22636/MKCI.2008.20.6.70
  5. Chung DDL. Electromagnetic interference shielding effectiveness of carbon materials. Carbon. 2001 Feb; 39(2):279-85. https://doi.org/10.1016/S0008-6223(00)00184-6
  6. Chen B, Wu K, Yao W. Conductivity of carbon fiber reinforced cement-based composites. Cement and Concrete Composites. 2004 May;26(4):291-7. https://doi.org/10.1016/S0958-9465(02)00138-5
  7. Dai Y, Sun M, Liu C, Li Z. Electromagnetic wave absorbing characteristics of carbon black cement-based. Composites. 2010 Aug;32(7):508-13. https://doi.org/10.1016/j.cemconcomp.2010.03.009
  8. Xu Z, Hao H. Electromagnetic interference shielding effectiveness of aluminum foams with different porosity. Journal of Alloys and Compounds. 2014 Dec;617:207-13. https://doi.org/10.1016/j.jallcom.2014.07.188
  9. Dou Z, Wu G, Huang X, Sun D, Jiang L. Electromagnetic shielding effectiveness of aluminum ally-fly ash composites. Composites Part A: Applied Science and Manufacturing. 2007 Jan;38(1):186-91. https://doi.org/10.1016/j.compositesa.2006.01.015
  10. Jin L, Haiyan Z, Ping L, Xijiang Y, Guoxun Z. The electromagnetic shielding effectiveness of a low-cost and transparent stainless steel fiber/silicone resin composite. IEEE Transactions on Electromagnetic Compatibility. 2014 Dec;56(2):328-34. https://doi.org/10.1109/TEMC.2013.2280140
  11. Kim YJ, Yi CK. The UHF wave shielding effectiveness of mortar with conductive inclusions. Journal of the Architectural Institute of Korea Structure & Construction. 2015 Mar;31(4):103-10. https://doi.org/10.5659/JAIK_SC.2015.31.4.10312.
  12. Choi HJ, Park JH, Min TB, Jang HO, Lee HS. An experimental study on the evaluation of EMP shielding performance of concrete applied with ATMSM using Zn-Al alloy wire. Journal of the Korea Institute of Building Construction. 2019 Jun;19(3):209-18. https://doi.org/10.5345/JKIBC.2019.19.3.209
  13. MIL-STD-188-125-1. High-altitude electromagnetic pulse (HEMP) protection for ground-based c41 facilities performing critical. Time-urgent Missions Part 1 Fixed facilities. Department of Defense Interface Standard; 1988. 98 p.