References
- ISO (International Organization for Standardization). 2006a. Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors. In ISO 6336-1:2006.
- ISO (International Organization for Standardization). 2006b. Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting). In ISO 6336-2:2006.
- ISO (International Organization for Standardization). 2006c. Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength. In ISO 6336-3:2006.
- ISO (International Organization for Standardization). 2006d. Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load. In ISO 6336-6:2006.
- Jang JH. 2018. Durability analysis of compound planetary gear of hydro mechanical transmission. M.S. dissertation, Chungnam National Univ., Deajeon, Korea. [in Korean]
- Jang JH, Chung SO, Choi CH, Park YJ, Chun WK, Kim SI, Kwon WO, Kim CW, Hong SJ, Kim YJ. 2016. Effects of PTO gear face width on safety factors. Korean Journal of Agricultural Science 43:650-655. [in Korean] https://doi.org/10.7744/kjoas.20160068
- Kang DK, Song CK. 2011. Profile-shifted gears in multi-axial differential system. Journal of the Korean Society for Precision Engineering 28:632-637. [in Korean]
- Kim DC, Kang YS. 2009. Case study of accelerated life test method for agricultural tractor transmission. Journal of Biosystems Engineering 34:331-336. [in Korean] https://doi.org/10.5307/JBE.2009.34.5.331
- Kim KU, Park HJ. 1994. Evaluation of engineering capability of tractor designs in Korea. Journal of Biosystems Engineering 19:85-90. [in Korean]
- Kim TJ. 2019. Strength analysis of driving gear of 50 kW class tractor considering to usage ratio. M.S. dissertation, Chungnam National Univ., Deajeon, Korea. [in Korean]
- Kim YJ, Chung SO, Park SJ, Choi CH. 2011. Analysis of power requirement of agricultural tractor by major field operation. Journal of Biosystems Engineering 36:79-88. [in Korean] https://doi.org/10.5307/JBE.2011.36.2.79
- Kong MG, Kang DS, Song CK, Park JH, Jung JK, Yoon SB. 2010. Strength design evaluation of the multistage gear system. Journal of The Korean Society of Mechanical Engineers 11:29-32. [in Korean]
- Kong MG, Song CK, Kim YD. 2011. Strength design evaluation of the multi-range transmission. Journal of The Korean Society for Power System Engineering 15:12-17. [in Korean] https://doi.org/10.9726/kspse.2011.15.3.012
- KS (Korean Industrial Standards). 2015. Cylindrical gears-ISO system of accuracy-Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth. In KS B ISO 1328-1:2015. [in Korean]
- Lee DH. 2011. Analysis of power requirements of tractor for field operations. M.S. dissertation, Sungkyunkwan Univ., Sunwon, Korea. [in Korean]
- Lee PU, Chung SO, Choi CH, Park YJ, Kim YJ. 2016. Analysis of the effects of operating point of tractor engine on fatigue life of PTO gear using simulation. Korean Journal of Agricultural Science 43:441-449. [in Korean] https://doi.org/10.7744/kjoas.20160047
- MAFRA (Ministry of Agriculture, Food and Rural Affairs). 2017. Enforcement rule of the agricultural machinery promotion act Article 2-4. MAFRA, Sejong, Korea. [in Korean]
Cited by
- 트랙터 최종구동축용 복합유성기어 방식 감속기의 Micro-geometry를 이용한 전달 오차 및 치면 하중 분포 개선에 관한 연구 vol.17, pp.1, 2019, https://doi.org/10.7839/ksfc.2020.17.1.001
- 농작업 부하 데이터를 활용한 80 kW급 전기구동 AWD 트랙터의 시뮬레이션 모델 개발 vol.17, pp.1, 2019, https://doi.org/10.7839/ksfc.2020.17.1.027
- Development of Control System for Automated Manual Transmission of 45-kW Agricultural Tractor vol.10, pp.8, 2019, https://doi.org/10.3390/app10082930
- Analysis of Tillage Depth and Gear Selection for Mechanical Load and Fuel Efficiency of an Agricultural Tractor Using an Agricultural Field Measuring System vol.20, pp.9, 2019, https://doi.org/10.3390/s20092450
- Theoretical Analysis of Bending Stresses to Design a Sprocket for Transportation Part of a Chinese Cabbage Collector vol.45, pp.2, 2019, https://doi.org/10.1007/s42853-020-00047-w
- Analysis of the load distribution and contact safety factor of PTO gears of a 71 kW class agricultural tractor vol.47, pp.2, 2019, https://doi.org/10.7744/kjoas.20200023
- 원추 지수가 트랙터 작업 부하에 미치는 영향 vol.17, pp.2, 2020, https://doi.org/10.7839/ksfc.2020.17.2.009
- 55kW급 농업용 트랙터 정유압 기계식 변속기 설계 vol.17, pp.2, 2019, https://doi.org/10.7839/ksfc.2020.17.2.019
- Development of a Simulation Model for HMT of a 50 kW Class Agricultural Tractor vol.10, pp.12, 2019, https://doi.org/10.3390/app10124064
- Development of a Prediction Model for Tractor Axle Torque during Tillage Operation vol.10, pp.12, 2019, https://doi.org/10.3390/app10124195
- A study on the emissions of SOx and NH3 for a 78 kW class agricultural tractor according to agricultural operations vol.47, pp.4, 2020, https://doi.org/10.7744/kjoas.20200095
- Strength analysis of the driving shift gears for a 67 kW class agricultural tractor according to tire type vol.47, pp.4, 2019, https://doi.org/10.7744/kjoas.20200096
- 토양 조건에 따른 농업용 트랙터의 견인 성능 분석 vol.17, pp.4, 2020, https://doi.org/10.7839/ksfc.2020.17.4.133
- 다목적 농작업 기계 변속기 부변속 안전율 분석 vol.17, pp.4, 2019, https://doi.org/10.7839/ksfc.2020.17.4.141
- Estimation of Axle Torque for an Agricultural Tractor Using an Artificial Neural Network vol.21, pp.6, 2021, https://doi.org/10.3390/s21061989