DOI QR코드

DOI QR Code

Stress intensity factors for double-edged cracked steel beams strengthened with CFRP plates

  • Wang, Hai-Tao (College of Civil and Transportation Engineering, Hohai University) ;
  • Wu, Gang (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Pan, Yu-Yang (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Zakari, Habeeb M. (College of Civil and Transportation Engineering, Hohai University)
  • 투고 : 2018.08.20
  • 심사 : 2019.11.11
  • 발행 : 2019.12.10

초록

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α1 was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Jiangsu Natural Science Foundation, China Postdoctoral Science Foundation, Central Universities

The authors would like to acknowledge the financial support from the National Natural Science Foundation of China (51708174), Jiangsu Natural Science Foundation (BK20170889), Project Funded by China Postdoctoral Science Foundation (2019M651675), and the Fundamental Research Funds for the Central Universities (2017B00714).

참고문헌

  1. Abd-Elhady, A.A. and Sallam, H.E.M. (2017), "Discussion of 'Fatigue Behavior of Cracked Steel Plates Strengthened with Different CFRP Systems and Configurations' by Hai-Tao Wang, Gang Wu, and Jian-Biao Jiang", J. Compos Constr., 21(3), 07016002. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000767
  2. Albrecht, P., Lenwari, A. and Feng, D.Q. (2008), "Stress intensity factors for structural steel I-beams", J. Struct. Eng., 134(3), 421-429. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:3(421)
  3. Bansal, P.P., Sharma, R. and Mehta, A. (2016), "Retrofitting of RC girders using pre-stressed CFRP sheets", Steel Compos. Struct., Int. J., 20(4), 833-849. https://doi.org/10.12989/scs.2016.20.4.833
  4. China Aviation Academy (1981), Stress Intensity Factor Handbook, Science Press, Beijing, China.
  5. Colombi, P. and Fava, G. (2015), "Experimental study on the fatigue behaviour of cracked steel beams repaired with CFRP plates", Eng. Fract. Mech., 145, 128-142. https://doi.org/10.1016/j.engfracmech.2015.04.009
  6. Colombi, C., Bassetti, A. and Nussbaumer, A. (2003), "Analysis of cracked steel members reinforced by pre-stress composite patch", Fatigue Fract. Eng. M., 26(1), 59-66. https://doi.org/10.1046/j.1460-2695.2003.00598.x
  7. Dunn, M.L., Suwito, W. and Hunter, B. (1997), "Stress intensity factor for cracked I-beams", Eng. Fract. Mech., 57(6), 609-616. https://doi.org/10.1016/S0013-7944(97)00059-3
  8. El-Emam, H.M., Salim, H.A. and Sallam, H.E. (2017), "Composite patch configuration and prestress effect on SIFs for inclined cracks in steel plates", J. Struct. Eng., 143(5), 04016229. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001727
  9. GB 50017 (2003), Code for design of steel structures; China Planning Press, Beijing, China.
  10. Ghafoori, E. and Motavalli, M. (2011), "Analytical calculation of stress intensity factor of cracked steel I-beams with experimental analysis and 3D digital image correlation measurements", Eng. Fract. Mech., 78(18), 3226-3242. https://doi.org/10.1016/j.engfracmech.2011.09.012
  11. Ghafoori, E., Motavalli, M., Botsis, J., Herwig, A. and Galli, M. (2012), "Fatigue strengthening of damaged metallic beams using prestressed unbonded and bonded CFRP plates", Int. J. Fatigue, 44, 303-315. https://doi.org/10.1016/j.ijfatigue.2012.03.006
  12. Ghafoori, E., Motavalli, M., Nussbaumer, A., Herwig, A., Prinz, G.S. and Fontana, M. (2015), "Design criterion for fatigue strengthening of riveted beams in a 120-year-old railway metallic bridge using pre-stressed CFRP plates", Compos. B: Eng., 68, 1-13. https://doi.org/10.1016/j.compositesb.2014.08.026
  13. Ghafoori, E., Hosseini, A., Al-Mahaidi, R., Zhao, X.L. and Motavalli, M. (2018), "Prestressed CFRP-strengthening and long-term wireless monitoring of an old roadway metallic bridge", Eng. Struct., 176, 585-605. https://doi.org/10.1016/j.engstruct.2018.09.042
  14. Hmidan, A., Kim, Y.J. and Yazdani, S. (2015), "Stress intensity factors for cracked steel girders strengthened with CFRP sheets", J. Compos. Constr., 19(5), 04014085. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000552
  15. Hosseini, A., Ghafoori, E., Al-Mahaidi, R., Zhao, X.L. and Motavalli, M. (2019), "Strengthening of a 19th-century roadway metallic bridge using nonprestressed bonded and prestressed unbonded CFRP plates", Constr. Build. Mater., 209, 240-259. https://doi.org/10.1016/j.conbuildmat.2019.03.095
  16. Hosseini, A., Ghafoori, E., Motavalli, M., Nussbaumer, A. and Zhao, X.L. (2017), "Mode I fatigue crack arrest in tensile steel members using prestressed CFRP plates", Compos. Struct., 178, 119-134. https://doi.org/10.1016/j.compstruct.2017.06.056
  17. Hu, L.L., Zhao, X.L. and Feng, P. (2016), "Fatigue behavior of cracked high-strength steel plates strengthened by CFRP sheets", J. Compos. Constr., 20(6), 04016043. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000698
  18. Jiao, H., Mashiri, F. and Zhao, X.L. (2012), "A comparative study on fatigue behaviour of steel beams retrofitted with welding, pultruded CFRP plates and wet layup CFRP sheets", Thin-Wall. Struct., 59, 144-152. https://doi.org/10.1016/j.tws.2012.06.002
  19. Krueger, R. (2004), "Virtual crack closure technique: History, approach, and applications", Appl. Mech. Rev., 57(2), 109-143. https://doi.org/10.1115/1.1595677
  20. Lam, A.C.C., Yam, M.C.H., Cheng, J.J.R. and Kennedy, G.D. (2010), "Study of stress intensity factor of a cracked steel plate with a single-side CFRP composite patching", J. Compos. Constr., 14(6), 791-615. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000136
  21. Lee, W.Y. and Lee, J.J. (2004), "Successive 3D FE analysis technique for characterization of fatigue crack growth behavior in composite-repaired aluminum plate", Compos. Struct., 66(1-4), 513-520. https://doi.org/10.1016/j.compstruct.2004.04.074
  22. Liu, H.B., Al-Mahaidi, R. and Zhao, X.L. (2009a), "Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures", Compos. Struct., 90(1), 12-20. https://doi.org/10.1016/j.compstruct.2009.02.016
  23. Liu, H.B., Xiao, Z.G., Zhao, X.L. and Al-Mahaidi, R. (2009b), "Prediction of fatigue life for CFRP-strengthened steel plates", Thin-Wall. Struct., 47(10), 1069-1077. https://doi.org/10.1016/j.tws.2008.10.011
  24. Liu, H.B., Zhao, X.L. and Al-Mahaidi, R. (2009c), "Boundary element analysis of CFRP reinforced steel plates", Compos. Struct., 91(1), 74-83. https://doi.org/10.1016/j.compstruct.2009.04.032
  25. Mall, S. and Conley, D.S. (2009), "Modeling and validation of composite patch repair to cracked thick and thin metallic panels", Compos. Part A, 40(9), 1331-1339. https://doi.org/10.1016/j.compositesa.2008.08.007
  26. Mechab, B., Chama, M., Kaddouri, K. and Slimani, D. (2016), "Probabilistic elastic-plastic analysis of repaired cracks with bonded composite patch", Steel Compos. Struct., Int. J., 20(6), 1173-1182. https://doi.org/10.12989/scs.2016.20.6.1173
  27. Naboulsi, S. and Mall, S. (1996), "Modeling of a cracked metallic structure with bonded composite patch using the three layers technique", Compos. Struct., 35(3), 295-308. https://doi.org/10.1016/0263-8223(96)00043-8
  28. Rose, L.R.F. and Wang, C.H. (2002), "Analytical Methods for Designing Composite Repairs", In: Baker, A,A,, Rose, L.R.F. and Jones, R. (Eds.), Advances in Bonded Composite Repairs of Metallic Airframe Structure, Elsevier Science Ltd., Amsterdam, Netherlands.
  29. Sallam, H.E.M., Badawy, A.A.M., Saba, A.M. and Mikhail, F.A. (2010), "Flexural behavior of strengthened steel-concrete composite beams by various plating methods", J. Const. Steel Res., 66(8-9), 1081-1087. https://doi.org/10.1016/j.jcsr.2010.03.005
  30. Serror, M.H., Soliman, E.G. and Hassan, A.F. (2017), "Numerical study on the rotation capacity of CFRP strengthened cold formed steel beams", Steel Compos. Struct., Int. J., 23(4), 385-397. https://doi.org/10.12989/scs.2017.23.4.385
  31. Setvati, M.R. and Mustaffa, R. (2018), "Rehabilitation of notched circular hollow sectional steel beam using CFRP patch", Steel Compos. Struct., Int. J., 26(2), 151-161. https://doi.org/10.12989/scs.2018.26.2.151
  32. Shen, H. and Hou, C. (2011), "SIFs of CCT plate repaired with single-sided composite patch", Fatigue Fract. Eng. M., 34(9), 728-733. https://doi.org/10.1111/j.1460-2695.2011.01569.x
  33. Shen, D.J., Yang, Q., Huang, C.B., Cui, Z.H. and Zhang, J.Y. (2019), "Tests on seismic performance of corroded reinforced concrete shear walls repaired with basalt fiber-reinforced polymers", Constr. Build. Mater., 209, 508-521. https://doi.org/10.1016/j.conbuildmat.2019.02.109
  34. Sih, G.C. (1973), Handbook of Stress Intensity Factors, Lehigh University Press, Bethlehem, PA, USA.
  35. Sun, C.T., Klug, J. and Arendt, C. (1996), "Analysis of cracked aluminum plates repaired with bonded composite patches", AIAA J., 34(2), 369-374. https://doi.org/10.2514/3.13073
  36. Wang, H.T. and Wu, G. (2018a), "Bond-slip models for CFRP plates externally bonded to steel substrates", Compos. Struct., 184, 1204-1214. https://doi.org/10.1016/j.compstruct.2017.10.033
  37. Wang, H.T. and Wu, G. (2018b), "Crack propagation prediction of double-edged cracked steel beams strengthened with FRP plates", Thin-Wall. Struct., 127, 459-468. https://doi.org/10.1016/j.tws.2018.02.018
  38. Wang, H.T., Wu, G. and Wu, Z.S. (2014), "Effect of FRP configurations on the fatigue repair effectiveness of cracked steel plates", J. Compos. Constr., 18(1), 04013023. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000422
  39. Wang, H.T., Wu, G. and Jiang, J.B. (2016a), "Fatigue behavior of cracked steel plates strengthened with different CFRP systems and configurations", J. Compos. Constr., 20(3), 04015078. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000647
  40. Wang, H.T., Wu, G., Dai, Y.T. and He, X.Y. (2016b), "Experimental study on bond behavior between CFRP plates and steel substrates using digital image correlation", J. Compos. Constr., 20(6), 04016054. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000701
  41. Wang, H.T. Wu, G. and Pang, Y.Y. (2018), "Theoretical and numerical study on stress intensity factors for FRP-strengthened steel plates with double-edged cracks", Sensors, 18(7), 2356. https://doi.org/10.3390/s18072356
  42. Wei, Y., Zhang, X., Wu, G. and Zhou, Y.F. (2018), "Behaviour of concrete confined by both steel spirals and fiber-reinforced polymer under axial load", Compos. Struct., 192, 577-591. https://doi.org/10.1016/j.compstruct.2018.03.041
  43. Wu, G., Wang, H.T., Wu, Z.S., Liu, H.Y. and Ren, Y. (2012), "Experimental study on the fatigue behavior of steel beams strengthened with different fiber-reinforced composite plates", J. Compos. Constr., 16(2), 127-137. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000243
  44. Wu, C., Zhao, X.L. and Al-Mahaidi, R. (2013), "Mode I stress intensity factor of center-cracked tensile steel plates with CFRP reinforcements", Int. J. Struct. Stab. Dy., 13(1), 1350005. https://doi.org/10.1142/S0219455413500053
  45. Ye, H.W., Li, C.J., Pei, S.L., Ummenhofer, T. and Qu, H.B. (2018), "Fatigue performance analysis of damaged steel beams strengthened with prestressed unbonded CFRP plates", J. Bridge Eng., 23(7), 04018040. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001251
  46. Yu, Q.Q., Chen, T., Gu, X.L., Zhao, X.L. and Xiao, Z.G. (2013), "Fatigue behaviour of CFRP strengthened steel plates with different degrees of damage", Thin-Wall. Struct., 69, 10-17. https://doi.org/10.1016/j.tws.2013.03.012
  47. Yu, Q.Q., Zhao, X.L., Chen, T., Gu, X.L. and Xiao, Z.G. (2014a), "Crack propagation prediction of CFRP retrofitted steel plates with different degrees of damage using BEM", Thin-Wall. Struct., 82, 145-158. https://doi.org/10.1016/j.tws.2014.04.006
  48. Yu, Q.Q., Zhao, X.L., Xiao, Z.G., Chen, T. and Gu, X.L. (2014b), "Evaluation of stress intensity factor for CFRP bonded steel plates", Adv. Struct. Eng., 17(12), 1729-1746. https://doi.org/10.1260/1369-4332.17.12.1729
  49. Yu, Q.Q. and Wu, Y.F. (2018), "Fatigue retrofitting of cracked steel beams with CFRP laminates", Compos. Struct., 192, 232-244. https://doi.org/10.1016/j.compstruct.2018.02.090
  50. Yu, Q.Q., Gu, X.L., Zhao, X.L., Zhang, D.M., Huang, H.W. and Jiang, C. (2019), "Characterization of model uncertainty of adhesively bonded CFRP-to-steel joints", Compos. Struct., 215, 150-165. https://doi.org/10.1016/j.compstruct.2019.02.045
  51. Zhang, D., Gu, X.L., Yu, Q.Q., Huang, H.W., Wan, B.L. and Jiang, C. (2018), "Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty", Compos. Struct., 185, 786-806. https://doi.org/10.1016/j.compstruct.2017.11.058
  52. Zheng, Y. (2007), "Experimental and theoretical research on fatigue behavior of steel structures strengthened with CFRP", Ph.D. Dissertation; Tsinghua University, Beijing, China.