한국안전학회지 (Journal of the Korean Society of Safety)

  • 제33권5호
  • /
  • Pages.92-100
  • /
  • 2018
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

건설현장 물체에 맞음 사고 저감을 위한 줄걸이 작업 전문 자격제도 도입에 관한 연구

A Study on the Introduction of a Rigging and Slinging Certificate System to Reduce a Struck by Object Accidents

  • 염춘호 (서울시립대학교 국제도시과학대학원) ;
  • 이진호 (대림산업(주) 토목SQ팀) ;
  • 박현 (서울시립대학교 국제도시과학대학원)
  • Yeom, Chun Ho (International School of Urban Sciences, University of Seoul) ;
  • Lee, Jinho (Civil Business Division, Civil Safety & Quality Team, DAELIM Industrial Co., Ltd.) ;
  • Park, Hyeon (International School of Urban Sciences, University of Seoul)
  • 투고 : 2018.06.20
  • 심사 : 2018.10.23
  • 발행 : 2018.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

According to 'The Analysis of Industrial Accidents in 2016' by Ministry of Employment and Labor, the number of deaths caused by accidents in the construction field is 391, accounting for 47% of 826 industrial fatalities in all industries. The breakdown of the 391 fatalities of the construction industry shows that 'struck by an object' accident had 30 fatalities, the 3rd in frequency following falling (235) and crashing (32) accidents. This study aims to explore ways to reduce the 'struck by an object' accident with emphasis on safety education and certificate system for rigging and slinging works. This study reviews literature on rigging and slinging works and analyzes 'struck by an object' accidents. The rules and regulation on the rigging and slinging works are also reviewed both for Korea and other countries with best practices in construction safety such as Singapore, Japan, U.K., and U.S. The rigging and slinging certificate systems of those countries are also reviewed to find any advantage in the construction safety management. In addition, a pilot rigging and slinging certificate system was executed in one of domestic construction site followed by two surveys: one on the riggers who participated in the pilot operation and the other on general managers in domestic construction sites. Based on the analysis of the 'struck by an object' accidents and pilot operation, this study proposes a rigging and slinging certificate system to reduce accidents, enhancing safety condition of construction sites. The certificate system was proposed in a way to accommodate working practice of construction sites. Depending on rigging careers and a crane load capacity, riggers are eligible to apply either basic or master certificate which makes difference in the level of rigging works. The safety condition of rigging and slinging work could be substantially enhanced if workers, managers, supervisors, administrators, and policy makers work together consistently.

키워드

참고문헌

  1. OSHRI, "Analysis of Industrial Accidents in 2016", KOSHA, 2017.
  2. R. E. Levitt and N. M. Samelson, "Construction Safety Management", John Wiley & Sons, 1993.
  3. J. H. Kim, "A Study on Protective Purposes and Intents of Use of Safety Helmets as for Reduction of Falls", J. Korean Soc. Saf., Vol. 28, No. 5, pp. 83-89, 2013. https://doi.org/10.14346/JKOSOS.2013.28.5.83
  4. E. J. Kim and H. S. Ahn, "Effective Disaster Risk Management Measures Fall", J. Korean Soc. Saf., Vol. 27, No. 2, pp. 41-47, 2012.
  5. H. J. Kim and S. W. Baek, "A Study on the Cause Analysis of Fall Accidents at Temporary Construction Sites", J. Korean Soc. Saf., Vol. 25, No. 1, pp. 62-64, 2010.
  6. H. S. Kim, S. W. Lee, W. J. Cheong and B. H. Ryu, "A Study on the Preventive Measures against Fall Injuries in Manufacturing Industry Focusing on the Portable Ladders", J. Korean Soc. Saf., Vol. 24, No. 6, pp. 136-143, 2009.
  7. J. H. Kim and E. S. Kim, "Forensic Engineering Study on the Evaluation of the Structural Stability of the Mobile Crane Accident", J. Korean Soc. Saf., Vol. 28, No. 3, pp. 11-17, 2013. https://doi.org/10.14346/JKOSOS.2013.28.3.011
  8. W. C. Shin and Y. S. Hong, "The Development of the Slope Monitoring System(SMS) ofthe Tower Crane", J. Korean Soc. Saf., Vol. 25, No. 6, pp. 60-64, 2010.
  9. G. H. Shim and D. H. Rie, "A Quantitative Risk Analysis of Related to Tower Crane Using the FMEA", J. Korean Soc. Saf., Vol. 25, No. 6, pp. 34-39, 2010.
  10. J. H. Park, T. J. Park, H. G. Lim and E. H. Seo, "Analysis of Crane Accidents by Using a Man-Machine System Model", J. Korean Soc. Saf., Vol. 22, No. 2, pp. 59-66, 2007.
  11. D. H. Kee and W. K. Kim, "Status of Fatal Crane Accidents and Their Safety Measures", J. Korean Soc. Saf., Vol. 20, No. 1, pp. 137-142, 2005.
  12. OSHRI, "A Study on Cause Analyses of Fatal Insuries by the Mobile Cranes", KOSHA, 2014.
  13. H. H. Cho, "Protecting Workers from Dangerous Work in Occupational Safety and Heath Act", The Journal of Labor Law, Vol. 42, No. 4, pp. 69-121, 2018.
  14. KOSHA, Rigging and Slinging Safety, 2007.
  15. MOEL, Occupational Safety and Health Act, 2017.
  16. MOEL, Orders on Mistry of Employment and Labor, 2017
  17. MOEL, Regulations for Occupational Safety and Health Act, 2017.
  18. C. W. Park, "A Study on Improvement of the Special Safety Training for the Slinging Work at the Construction Site", Incheon University, 2014.
  19. J. W. Lee, C. H. Han, Y. J. Woo, J. H. Lee and C. H. Lee, "A Study on the Development of Rigging and Slinging Course for Seafares", Journal of Fishries and Marine Sciences Education, Vol. 28, No. 6, pp. 1561-1572, 2016. https://doi.org/10.13000/JFMSE.2016.28.6.1561
  20. Y. A. Onur, "Investigation of the Effect of the Sling Angle and Size on the Reliability of Lifting Hooks", Simulation, pp. 1-12, 2017.
  21. U.S. Department of Energy, Synthetic Sling Failure - Evaluations and Recommendations, 2009.
  22. A. Shapira and B. Lyachin, "Identification and Analysis of Factors Affecting Safety on Construction Sites with Tower Cranes", Journal of Construction Engineering and Management, Vol. 135, No. 1, pp. 24-33, 2009. https://doi.org/10.1061/(ASCE)0733-9364(2009)135:1(24)
  23. J. E. Beavers, J. R. Moore, R. Rinehart and W. R. Schriver, "Crane-related Fatalities in the Construction Industry", Journal of Construction Engineering and Management, Vol. 132, No. 9, pp. 901-910, 2006. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:9(901)
  24. Singapore WSH Council, WSH Statistic & Resources, www.wshc.sg.
  25. Japan Ministry of Health, Labour and Welfare, www.mhlw.go.jp.
  26. U.K. Health and Safety Executive, Reporting of Injuries, Diseases and Dangerous Occurrences Regulations, www.hse.gov.uk.
  27. U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries, www.bls.gov.
  28. PLASA, Professional Lighting and Sound Association, www.plasa.org.
  29. U.S. OSHA, Safety and Health Regulations for Construction, www.osha.gov.