DOI QR코드

DOI QR Code

Reactive modification of PVC membranes for the improved performance

  • Jhaveri, Jainesh H. (Department of Chemical Engineering, Indian Institute of Technology) ;
  • Patel, Chetan M. (Department of Chemical Engineering, S.V. National Institute of Technology) ;
  • Murthy, Z.V.P. (Department of Chemical Engineering, S.V. National Institute of Technology)
  • Received : 2016.11.30
  • Accepted : 2018.06.26
  • Published : 2018.11.25

Abstract

Poly vinyl chloride (PVC) was chemically modified, and used for ultrafiltration to analyze the performance. Non-solvent induced phase separation (NIPS) method was used to prepare membranes. The neat PVC membrane was casted and used as a control membrane. Modified membrane was prepared by reacting PVC with ethanolamine (EA) in the casting solution (labeled as CM-PVC). Pure water permeability (PWP) was evaluated by measuring pure water flux. Humic acid was used as model foulant solute to analyze flux and rejection ability of membranes. Flux and rejection data of neat and modified membranes were compared to prove the improvement in the filtration performance. The experimental results showed that for PVC and CM-PVC, PWP was calculated to be ~64 and ${\sim}143L/m^2{\cdot}h$, respectively, and the rejection of humic acid was found to be 98% and 100%, respectively. TGA was carried out to analyze the effect of chemical modification on the thermal stability of polymer. FT-IR analysis was another characterization technique used for the comparative study.

Keywords

References

  1. Al Aani, S., Wright, C.J., Atieh, M.A. and Hilal, N. (2017), "Engineering nanocomposite membranes: Addressing current challenges and future opportunities", Desalination, 401, 1-15. https://doi.org/10.1016/j.desal.2016.08.001
  2. Aryanti, P., Yustiana, R., Purnama, R. and Wenten, I. (2015), "Performance and characterization of PEG400 modified PVC ultrafiltration membrane", Membr. Water Treat., 6(5), 379-392. https://doi.org/10.12989/mwt.2015.6.5.379
  3. Fan, X., Su, Y., Zhao, X., Li, Y., Zhang, R., Zhao, J., Jiang, Z., Zhu, J., Ma, Y. and Liu, Y. (2014), "Fabrication of polyvinyl chloride ultrafiltration membranes with stable antifouling property by exploring the pore formation and surface modification capabilities of polyvinyl formal", J. Membr. Sci., 464, 100-109. https://doi.org/10.1016/j.memsci.2014.04.005
  4. Guo, W., Ngo, H.H and Li, J. (2012), "A mini-review on membrane fouling", Bioresour. Technol., 122, 27-34. https://doi.org/10.1016/j.biortech.2012.04.089
  5. Hirose, S., Shimizu, A. and Nose, T. (1979), "Preparation and structures of the poly(vinyl chloride) porous membranes", J. Appl. Polym. Sci., 23(11), 3193-3204. https://doi.org/10.1002/app.1979.070231105
  6. Jhaveri, J.H. and Murthy, Z.V.P. (2016a), "Nanocomposite membranes", Desalination Water Treat., 55, 26803-26819.
  7. Jhaveri, J.H. and Murthy, Z.V.P. (2016b), "A comprehensive review on anti-fouling nanocomposite membranes for pressure driven membrane separation processes", Desalination, 379, 137-154. https://doi.org/10.1016/j.desal.2015.11.009
  8. Kawai, T., Lee, Y.M. and Yamada, S. (1997), "Preparation of asymmetric porous membranes of poly (vinyl chloride)", Polymer, 38(7), 1631-1637. https://doi.org/10.1016/S0032-3861(96)00662-3
  9. Kumar, R.S., Arthanareeswaran, G., Paul, D. and Kweon, J.H. (2015), "Modification methods of polyethersulfone membranes for minimizing fouling-Review", Membr. Water Treat., 6(4), 323-337. https://doi.org/10.12989/mwt.2015.6.4.323
  10. Liu, B., Chen, C., Zhang, W., Crittenden, J. and Chen, Y. (2012), "Low-cost antifouling PVC ultrafiltration membrane fabrication with Pluronic F 127: Effect of additives on properties and performance", Desalination, 307, 26-33. https://doi.org/10.1016/j.desal.2012.07.036
  11. Liu, J., Su, Y., Peng, J., Zhao, X., Zhang, Y., Dong, Y. and Jiang, Z. (2012), "Preparation and performance of antifouling PVC/CPVC blend ultrafiltration membranes", Industrial Eng. Chem. Res., 51(24), 8308-8314. https://doi.org/10.1021/ie300878f
  12. Mei, S., Xiao, C. and Hu, X. (2011), "Preparation of porous PVC membrane via a phase inversion method from PVC/DMAc/water/additives", J. Appl. Polym. Sci., 120(1), 557-562. https://doi.org/10.1002/app.33219
  13. Peng, Y. and Sui, Y. (2006), "Compatibility research on PVC/PVB blended membranes", Desalination, 196, 13-21. https://doi.org/10.1016/j.desal.2005.07.053
  14. Singh, A., Rawat, M. and Pande, C. (2010), "Chemical modification and characterization of poly (vinyl chloride) by crosslinking of multifunctional amines", J. Appl. Polym. Sci., 118(2), 876-880. https://doi.org/10.1002/app.32432
  15. Su, Y., Zhao, Q., Liu, J., Zhao, J., Li, Y. and Jiang, Z. (2015), "Improved oil/water emulsion separation performance of PVC/CPVC blend ultrafiltration membranes by fluorination treatment", Desalination Water Treat., 55(2), 304-3014. https://doi.org/10.1080/19443994.2014.918903
  16. Van der Bruggen, B. (2009), "Chemical modification of polyethersulfone nanofiltration membranes: A review", J. Appl. Polym. Sci., 114(1), 630-642. https://doi.org/10.1002/app.30578
  17. Xu, J. and Xu, Z.L. (2002), "Poly (vinyl chloride)(PVC) hollow fiber ultrafiltration membranes prepared from PVC/additives/solvent", J. Membr. Sci., 208(1-2), 203-212. https://doi.org/10.1016/S0376-7388(02)00261-2
  18. Yu, Z., Liu, X., Zhao, F., Liang, X. and Tian, Y. (2015), "Fabrication of a low-cost nano-$SiO_2$/PVC composite ultrafiltration membrane and its antifouling performance", J. Appl. Polym. Sci., 132(2), 41267.
  19. Zhao, C., Xue, J., Ran, F. and Sun, S. (2013). "Modification of polyethersulfone membranes - A review of methods", Progr. Mater. Sci., 58(1), 76-150. https://doi.org/10.1016/j.pmatsci.2012.07.002
  20. Zhu, J., Su, Y., Zhao, X., Li, Y., Zhao, J., Fan, X. and Jiang, Z. (2014), "Improved antifouling properties of poly(vinyl chloride) ultrafiltration membranes via surface zwitterionicalization", Industrial Eng. Chem. Res., 53(36), 14046-14055. https://doi.org/10.1021/ie5022877