DOI QR코드

DOI QR Code

Monte Carlo simulations of criticality safety assessments of transuranic element storage in a pyroprocess facility

  • Kim, Jinhwan (Dept. of Nuclear & Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Kim, Jisoo (Dept. of Nuclear & Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lim, Kyung Taek (Dept. of Nuclear & Quantum Engineering, Korea Advanced Institute of Science and Technology) ;
  • Ahn, Seong Kyu (Korea Atomic Energy Research Institute, KAERI) ;
  • Park, Se Hwan (Korea Atomic Energy Research Institute, KAERI) ;
  • Cho, Gyuseong (Dept. of Nuclear & Quantum Engineering, Korea Advanced Institute of Science and Technology)
  • Received : 2018.01.19
  • Accepted : 2018.03.26
  • Published : 2018.08.25

Abstract

In this study, criticality safety assessments of the potential for storing transuranic element (TRU) ingots via a pyroprocess were evaluated to determine the appropriate TRU storage design parameters, in this case the ratio of the TRU ingot height to the radius and the number of TRU ingot canisters stacked within a container. Various accident situations were modeled over a modeling period of 5 years for a cumulative inventory of TRU ingots with various water densities in submerged containers and with various pitches between the containers in the facility. Under these combinations, we calculated the threshold of TRU height and radius ratio depending on the number of canisters in a container to keep the stored TRU in a subcritical state. The ratio of the TRU ingot height to radius should not exceed 4.5, 1.1, 0.5, 0.3, and 0.2 for two, three, four, five, and six levels of stacked canisters in a container, respectively.

Keywords

References

  1. H.D. Kim, H.S. Shin, D.Y. Song, T.H. Lee, B.Y. Han, S.K. Ahn, S.H. Park, Application of Safeguards-by-design for the Pyroprocessing Facilities in ROK, XL, 2012, pp. 24-31.
  2. R.A. Borrelli, Use of curium spontaneous fission neutrons for safeguardability of remotely-handled nuclear facilities: fuel fabrication in pyroprocessing, Nucl. Eng. Des. 260 (2013) 64-77, https://doi.org/10.1016/j.nucengdes. 2013.03.025.
  3. R.A. Borrelli, Use of curium neutron flux from head-end pyroprocessing subsystems for the high reliability safeguards methodology, Nucl. Eng. Des. 277 (2014) 166-172, https://doi.org/10.1016/j.nucengdes.2014.06.028.
  4. R.A. Borrelli, Functional components for a design strategy: hot cell shielding in the high reliability safeguards methodology, Nucl. Eng. Des. 305 (2016) 18-27, https://doi.org/10.1016/j.nucengdes.2016.05.010.
  5. S.I. Moon, S.J. Seo, W.M. Chong, G.S. You, J.H. Ku, H.D. Kim, Identification of safety controls for engineering-scale pyroprocess facility, Nucl. Eng. Technol. 47 (2015) 915-923, https://doi.org/10.1016/j.net.2015.08.005.
  6. A. Mohammadi, M. Hassanzadeh, M. Gharib, Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors, Appl. Radiat. Isot 108 (2016) 129-132, https://doi.org/10.1016/ j.apradiso.2015.12.045.
  7. V. Barkauskas, R. Plukiene, A. Plukis, Actinide-only and full burn-up credit in criticality assessment of RBMK-1500 spent nuclear fuel storage cask using axial burn-up profile, Nucl. Eng. Des. 307 (2016) 197-204, https://doi.org/ 10.1016/j.nucengdes.2016.07.012.
  8. J.J. Herrero, A. Vasiliev, M. Pecchia, H. Ferroukhi, S. Caruso, Review calculations for the OECD/NEA burn-up credit criticality safety benchmark, Ann. Nucl. Energy 87 (2016) 48-57, https://doi.org/10.1016/j.anucene.2015.08.014.
  9. M. Rezaeian, J. Kamali, Effect of a dual-purpose cask payload increment of spent fuel assemblies from VVER 1000 Bushehr nuclear power plant on basket criticality, Appl. Radiat. Isot. 119 (2017) 80-85, https://doi.org/10.1016/ j.apradiso.2016.10.008.
  10. S.I. Moon, W.M. Chong, G.S. You, J.H. Ku, H.D. Kim, Y.K. Lim, H.S. Chang, Preliminary safety study of engineering-scale pyroprocess facility, Nucl. Eng. Technol. 46 (2014) 63-72, https://doi.org/10.5516/NET.06.2013.018.
  11. S.M. Bowman, I.C. Gauld, OrigenArp primer : How to Perform Isotopic Depletion and Decay Calculations with SCALE/ORIGEN, Oak Ridge Natl. Lab., 2010, pp. 1-85. ORNL/TM-20.
  12. E. Tomlinson, C. Brown, Nuclear criticality safety considerations in design of dry fuel assembly storage arrays, Nucl. Technol. 63 (1983) 347-350. https://doi.org/10.13182/NT83-A33293
  13. F. Brown, A Review of Best Practices for Monte Carlo Criticality Calculations, Los Alamos Natl. Lab., 2009, pp. 1-10. LA-UR-09-03136.
  14. R. Brewer, Criticality Calculations with MCNP5 TM : A Primer, Los Alamos Natl. Lab., 2009, pp. 0-201. LA-UR-09-00380.