DOI QR코드

DOI QR Code

외란의 변화가 있는 PMSM의 강인하고 정밀한 위치 제어에 대한 연구

A Study on Robust and Precise Position Control of PMSM under Disturbance Variation

  • Lee, Ik-Sun (Dept. of Electrical and Electronic Engineering, Dankook University) ;
  • Yeo, Won-Seok (Dept. of Electrical and Electronic Engineering, Dankook University) ;
  • Jung, Sung-Chul (Dept. of Electrical and Electronic Engineering, Dankook University) ;
  • Park, Keon-Ho (Dept. of Electrical and Electronic Engineering, Dankook University) ;
  • Ko, Jong-Sun (Dept. of Electrical and Electronic Engineering, Dankook University)
  • 투고 : 2018.07.06
  • 심사 : 2018.09.27
  • 발행 : 2018.11.01

초록

Recently, a permanent magnet synchronous motor of middle and small-capacity has high torque, high precision control and acceleration / deceleration characteristics. But existing control has several problems that include unpredictable disturbances and parameter changes in the high accuracy and rigidity control industry or nonlinear dynamic characteristics not considered in the driving part. In addition, in the drive method for the control of low-vibration and high-precision, the process of connecting the permanent magnet synchronous motor and the load may cause the response characteristic of the system to become very unstable, to cause vibration, and to overload the system. In order to solve these problems, various studies such as adaptive control, optimal control, robust control and artificial neural network have been actively conducted. In this paper, an incremental encoder of the permanent magnet synchronous motor is used to detect the position of the rotor. And the position of the detected rotor is used for low vibration and high precision position control. As the controller, we propose augmented state feedback control with a speed observer and first order deadbeat disturbance observer. The augmented state feedback controller performs control that the position of the rotor reaches the reference position quickly and precisely. The addition of the speed observer to this augmented state feedback controller compensates for the drop in speed response characteristics by using the previously calculated speed value for the control. The first order deadbeat disturbance observer performs control to reduce the vibration of the motor by compensating for the vibrating component or disturbance that the mechanism has. Since the deadbeat disturbance observer has a characteristic of being vulnerable to noise, it is supplemented by moving average filter method to reduce the influence of the noise. Thus, the new controller with the first order deadbeat disturbance observer can perform more robustness and precise the position control for the influence of large inertial load and natural frequency. The simulation stability and efficiency has been obtained through C language and Matlab Simulink. In addition, the experiment of actual 2.5[kW] permanent magnet synchronous motor was verified.

키워드

참고문헌

  1. Stephen J. Chapman, "Electric Machinery Fundamentals", McGraw-Hill Co., 2003.
  2. Bimal K. Bose, "Modern Power Electronics and AC Drives", Prentice-Hall Inc., 2002.
  3. Seung-Ki Sul, "Control of Electric Machine Drive Systems", Brain Korea., 2002.
  4. Stephen D. Umans, "Electric Machinery", McGraw-Hill Co., 2014.
  5. Slobodan N. Vukosavic, Milic R. Stojic, "Suppression of Torsional Oscillations on a High-Performance Speed Servo Drive", IEEE Trans. Ind. Electronics, Vol. 45, No. 1, 1998. February.
  6. Karl J. Astrom, Bjorn Wittenmark, "Computer Controlled System", Prentice Hall Information and System Sciences Series, 2002.
  7. J. S. Ko, J. H. Lee, S. K. Chung, M. J. Youn, "A Robust Position Control of Brushless DC Motor with Deadbeat Load Torque Observer", IEEE Trans. on Industrial Electronics, Vol. 40, No. 5, pp. 512-520, 1993. https://doi.org/10.1109/41.238020
  8. J. S. Ko, "Asymptotically Stable Adaptive Load Torque Observer for Precision Position Control of BLDC Motor", IEE Proc. on Electric Power Applications, Vol. 145, No. 4, pp. 383-386, 1998. July. https://doi.org/10.1049/ip-epa:19982010
  9. A. Krzyzak, E. Rafajlowicz, M. pawlak, "Moving Average Restoration of Bandlimited Signals from Noisy Observations", IEEE Trans. on Signal Processing, Vol. 45, No. 12, 1997.
  10. J. Y. Hung, "Control of Industrial Robots that have Transmission Elasticity", IEEE Trans. Ind. Electron., Vol. 38, pp. 421-427, 1991. December. https://doi.org/10.1109/41.107097
  11. Chi-Tsong Chen, "Linear System Theory and Design", Oxford University Press, 1999.
  12. R. Dhauadi, K. Kubo, M. Tobise, "Robust Speed Control of Rolling Mill Drive Systems Using the Loop Transfer Recovery Design Methodology", IEEE Trans. Ind. Electron., Vol. 42, pp. 555-560, 1991. November
  13. Ik-Sun Lee, Sung-Chul Jung, In-Sik Yoon, Jong-Sun Ko, "A Study on the PMSM Position Control of Vibration Reduction Using First Order Observer", KIEE. Conference, pp. 119-122, 2018. April.
  14. Richard C. Dorf, Robert H. Bishop, "Modern Control Systems", Prentice Hall, 2010.