DOI QR코드

DOI QR Code

Evaluation the behavior of pre-fabricated moment connection with a new geometry of pyramidal end block under monotonic and cyclic loadings

  • 투고 : 2017.10.29
  • 심사 : 2018.07.07
  • 발행 : 2018.11.10

초록

Researchers have been long studying new building implementation methods to improve the quality of construction, reduce the time of assembly, and increase productivity. One of these methods is the use of modular pre-fabricated structural forms that are composed of a beam, column, short column, pyramidal end block, and connection plates. In this study, a new geometry for the pyramidal end block was proposed that helps facilitate the assembly procedure. Since the proposed configuration affects the performance of this form of connection, its behavior was evaluated using finite element method. For this purpose, the connection was modeled in ABAQUS and then validated by comparing the outputs with experimental results. The research proceeded through analyzing 16 specimens under monotonic and cyclic loading. The results indicated that using the pyramidal end block not only makes the assembly process easier but also reduces the out-of-plane displacement of the short column webs and the vertical displacement of beam end. By choosing appropriate section properties for column and beam, the connection can bear a rotation up to 0.01 radians within its inelastic region and a total of 0.04 radians without any significant reduction in its bearing capacity.

키워드

참고문헌

  1. Akgonen, A., Yorgun, C. and Vatansever, C. (2015), "Cyclic behavior of extended end-plate connections with European steel shapes", Steel Compos. Struct., Int. J., 19(5), 1185-1201. https://doi.org/10.12989/scs.2015.19.5.1185
  2. Alhendi, H. and Celikag, M. (2015), "Parametric study on moment-rotation characteristics of reverse channel connections to tubular columns", J. Constr. Steel Res., 104, 261-273. https://doi.org/10.1016/j.jcsr.2014.10.009
  3. Astaneh-Asl, A. and Nader, M.N. (1992), "Cyclic behavior of frames with semi rigid connections", In: Connections in Steel Structures II: Behavior, Strength, and Design, Elsevier, Amsterdam, Netherlands, pp. 327-334.
  4. Ataollahi, S., Banan, M. and Banan, M. (2016), "Numerical cyclic behavior of T-RBS: A new steel moment connection", Steel Compos. Struct., Int. J., 21(6), 1251-1264. https://doi.org/10.12989/scs.2016.21.6.1251
  5. Costa-Neves, L.F., Figueiredo, J.P., da S. Vellasco, P.C.G. and da Cruz Vianna, J. (2013), "Perforated shear connectors on composite girders under monotonic loading: An experimental approach", Eng. Struct., 56, 721-737. https://doi.org/10.1016/j.engstruct.2013.06.004
  6. Elnashai, A.S., Elghazouli, A.Y. and Denesh-Ashtiani, F.A. (1998), "Response of semi rigid steel frames to cyclic and earthquake loads", J. Struct. Eng., 124(8), 857-867. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(857)
  7. FEMA (2000), Recommended seismic design criteria for new steel moment frame buildings, Report no. FEMA-350; Federal Emergency Management Agency: California Universities for Research in Earthquake Engineering.
  8. Gerami, M., Saberi, H., Saberi, V. and Saedi Daryan, A. (2010), "Cyclic behavior of bolted connections with different arrangement of bolts", J. Constr. Steel Res., 67, 690-705.
  9. Herrera, R., Bravo, M., Gomez, G. and Aedo, G. (2013), "Performance of built-up T-stubs for Double T moment connections", J. Constr. Steel Res., 88, 289-295. https://doi.org/10.1016/j.jcsr.2013.05.022
  10. Ismail, R.E.S., Fahmy, A.S., Khalifa, A.M. and Mohamed, Y.M. (2016), "Numerical Study on Ultimate Behaviour of Bolted End-Plate Steel Connections", Latin Am. J. Solids Struct., 13(1), 1-22. https://doi.org/10.1590/1679-78251579
  11. JGJ82-2011 (2011), Technical Specification for High Strength Bolt Connections of Steel Structure; China Building Industry Press, Beijing, China. [In Chinese]
  12. Kulkarni Swati, A. and Gaurang, V. (2014), "Study of steel moment connection with and without reduced beam section", Case Studies Struct. Eng., 1, 26-31. https://doi.org/10.1016/j.csse.2014.04.001
  13. Liu, X.C., Pu, S.H., Zhang, A.L., Xu, A.X., Ni, Z., Sun, Y. and Ma, L., (2015), "Static and seismic experiment for bolted-welded joint in modularized prefabricated steel structure", J. Constr. Steel Res., 115, 417-433. https://doi.org/10.1016/j.jcsr.2015.08.036
  14. Maggi, Y.I., Goncalves, R.M., Leon, R.T. and Ribeiro, L.F.L. (2005), "Parametric analysis of steel bolted endplate connections using finite element modeling", J. Constr. Steel Res., 61(5), 689-708. https://doi.org/10.1016/j.jcsr.2004.12.001
  15. Miller, D.K. (1998), "Lessons learned from the Northridge earthquake", J. Eng. Struct., 20, 249-260. https://doi.org/10.1016/S0141-0296(97)00031-X
  16. Popov, E.P. and Takhirov, S.M. (2002), "Bolted large seismic steel beam-to-column connections part 1: experimental study", Eng. Struct., 24, 1523-1534. https://doi.org/10.1016/S0141-0296(02)00086-X
  17. Sabbagh, A.B., Petkovski, M., Pilakoutas, K. and Mirghaderi, R. (2013), "Cyclic behavior of bolted cold-formed steel moment connections: FE modelling including slip", J. Constr. Steel Res., 80, 100-108. https://doi.org/10.1016/j.jcsr.2012.09.010
  18. Salmon, C., Johnson, J. and Malhas, F. (2009), Steel Structures, Pearson/Prentice Hall, Upper Saddle River, NJ, USA.
  19. Smail, R.E.S., Fahmy, A.S., Khalifa, A.M. and Mohamed, Y.M. (2016), "Numerical study on ultimate behaviour of bolted endplate steel connections", Latin Am. J. Solids Struct., 13, 1-22. https://doi.org/10.1590/1679-78251579
  20. Zahmatkesh, F., Osman, M.H., Tahir, M.M., Talebi, E. and Kueh, A. (2016), "Numerical study on the structural performance of steel beams with slant end-plate connections", Latin Am. J. Solids Struct., 13, 1360-1387. https://doi.org/10.1590/1679-78252158

피인용 문헌

  1. Non-linear FEA of mechanical properties of modular prefabricated steel-concrete composite joints vol.40, pp.4, 2018, https://doi.org/10.12989/scs.2021.40.4.533