한국지반공학회논문집 (Journal of the Korean Geotechnical Society)

한국지반공학회 (Korean Geotechnical Society)
권호 표지
DOI QR코드

DOI QR Code

2차원 모형실험 및 수치해석을 통한 현수교 터널식 앵커리지의 인발거동 특성 분석

Analysis of Pull-out Behavior of Tunnel-type Anchorage for Suspended Bridge Using 2-D Model Tests and Numerical Analysis

  • 서승환 (한국건설기술연구원 인프라안전연구본부) ;
  • 박재현 (한국건설기술연구원 인프라안전연구본부) ;
  • 이성준 (청주대학교 공과대학 토목공학과) ;
  • 정문경 (한국건설기술연구원 인프라안전연구본부)
  • 투고 : 2018.10.15
  • 심사 : 2018.10.25
  • 발행 : 2018.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 케이블 인발하중이 작용하는 현수교의 앵커리지 종류 중 터널식 앵커리지의 인발거동 특성을 축소모형실험과 수치해석을 통하여 분석하였다. 터널식 앵커리지는 국내외 적용사례가 적고 파괴형태 및 안전율 등 설계기법이 명확히 정립되어 있지 않아 설계기법 개선과 관련한 연구가 필요한 실정이다. 이에 국내 최초로 터널식 앵커리지가 적용된 울산대교를 대상으로 형상 및 구조를 단순화하여 축소모형실험을 수행하였다. 모형실험에서 앵커리지 구체와 주변 암반을 석고혼합물로 구현하였고, 평면 변형률 조건에서 인발 거동 특성을 조사하였다. 모형실험결과 터널식 앵커리지의 최종 인발 파괴모드는 울산대교의 설계시 가정한 바와 달리 쐐기(wedge)형태로 나타났다. 이를 검증하기 위해 유한요소해석 프로그램인 ABAQUS를 사용하여 수치해석을 시행하였고, 모형실험결과와 동일한 인발 파괴 거동을 확인할 수 있었다. 수치해석에서는 추가적으로 모형재료의 포아송비 및 주변암반의 강도 변화에 따른 영향을 조사하였다. 그 결과 극한 인발상태까지는 포아송비에 따른 영향이 적은 것으로 나타났고, 주변암반의 강도가 앵커리지 구체의 강도보다 10배 이상 큰 특수한 경우에 한하여 앵커리지가 주변 암반의 경계면을 따라 빠져나오는 소위 플러그(plug)형태의 파괴모드가 발생할 수 있음을 확인하였다.

In this study, the pull-out behavior of tunnel type anchorage of suspension bridges was analyzed based on results from laboratory size model tests and numerical analysis. Tunnel type anchorage has found its applications occasionally in both domestic and oversea projects, therefore design method including failure mode and safety factor is yet to be clearly established. In an attempt to improve the design method, scaled model tests were conducted by employing simplified shapes and structure of the Ulsan grand bridge's anchorage which was the first case history of its like in Korea. In the model tests, the anchorage body and the surrounding rocks were made by using gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests showed that the tunnel type anchorage underwent wedge shape failure. For the verification of the model tests, numerical analysis was carried out using ABAQUS, a finite element analysis program. The failure behavior predicted by numerical analysis was consistent with that by the model tests. The result of numerical analysis also showed that the effect of Poisson's ratio was negligible, and that a plugging type failure mode could occur only when the strength of the surrounding rocks was 10 times larger than that of anchorage body.

키워드

참고문헌

  1. ABAQUS (2014), ABAQUS/Explict Version 6.14, Dassault Systemes, Providence, RI, USA.
  2. Coquard, P. and Boisetelle, R. (1994), "Water and Solvent Effects on the Strength of Set Plaster", Int. J. of Rock Mechanics and Min. Sci., 31.5, pp.517-524. https://doi.org/10.1016/0148-9062(94)90153-8
  3. Chung, J.S., Moon, I.K., and Yoo, C.H. (2013), "Behavior Characteristics of Tunnel in the Cavity Ground by Using Scale Model Tests", J. of Korean Geo-Environmental Society, Vol.14(12), pp. 61-69. https://doi.org/10.14481/jkges.2013.14.12.061
  4. Dakeuchi, K.O. and Yoshida, Y.T. (1984), "Tunnel Type Anchorage", Construction report of Honshou sikoku connection bridge, Vol.22(11), pp.85-92.
  5. Hobbs, D.W. (1968), "Scale Model Study of Strata Movement around Mine Toadways : I. The Dependence of Roadway Closure upon Rock Strength", Int. J. of Rock Mech. Min. Sci., 5, pp. 219-235. https://doi.org/10.1016/0148-9062(68)90010-7
  6. Hong, E.S., Cho, G.C., Baak, S.H., Park, J.H., Chung, M.K., and Lee, S.W. (2014), "A Numerical Study on Pull-out Behavior of Cavern-type Rock Anchorages", J. of Korean Tunn. Undergr. Sp. Assoc, Vol.16(6), pp.521-531. https://doi.org/10.9711/KTAJ.2014.16.6.521
  7. Jung, H.R. and Kim, J.W. (2006), "Deformation Behavior around Tunnel in Anisotropic Rocks Considering Joint Orientation and Rock Pressure Condition Using Scaled Model Tests", Korean Scosiety for Rock Mechanics, Vol.16(4), pp.313-325.
  8. Kanemitsu, H., Omachi, T., and Higuchi, K. (1980), "Calculation Method of Ultimated Resisting Pull Strength of Tunnel Type of Anchorage for Suspension Bridge", Honsi Technical Report, Vol.5, No.16, pp.15-20 (in Japanese).
  9. Kim, K.W., Cho, N.S., and Na, Y.M. (2011), "Anchorage Design of Ulsan Grand Bridge", Magazine of Concrete Institute, Vol.23, No.4, pp.51-54.
  10. Lubliner, J.J., Oliver, S.O., and Onate, E. (1989), "A Plastic-damage Model for Concrete", International Journal of Solids and Structures, Vol.25, No.3, pp.229-326.
  11. Park, G.W., Chung, S.T., and Cho, J.H. (2009), "The Design of Tunnel Type Anchorage in Ulsan Grand Bridge", Yooshin technical report, Vol.16, pp.328-336.
  12. Park, C.S., Park, J.H., Chung, M.K., and Oh, I.K. (2013), "A Study for Improvement of Suspension Bridge's Tunnel Anchorage Design", Proc. of KSCE Annual, Conference, Korean Society of Civil Engineering (in Korean).
  13. Pack, C.S., Park, J.H., and Chung, M.K. (2014), "Recent Study for Improving the Calcuation Method of Ultimate Pull-out Resistance of Tunnel Anchorage", Proc. of the KGS Spring National Conference, Korean Geotechnical Society (in Korean).
  14. Yooshin Co., Ltd. (2010a), Ulsan Grand Bridge and Access Road Private Proposal Project : Basic Design Report (in Korean).
  15. Yooshin Co., Ltd. (2010b), Ulsan Grand Bridge and Access Road Private Proposal Project : Geotechnical Soil Report (in Korean).

피인용 문헌

  1. Bearing Characteristics of Surrounding Rock of Deep Mining Roadway with Full and End Bolt Anchorages: A Comparative Numerical and Experimental Study vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/8829323