초록
최대 이륙중량 55 kg에 최대 순항속도가 180 km/h이고 수직이착륙이 가능한 쿼드 틸트 프롭로터 무인기에 적용할 프롭-블레이드 단면 설계를 수행하였다. 먼저 프롭-블레이드 단면 설계수행을 위한 설계 프로세스를 수립하고 단면 설계에 필요한 요구도를 식별하였으며 식별된 요구도 만족을 위한 단면 설계를 수행하였다. 단면 설계 결과를 분석하기 위하여 유한요소 단면해석 프로그램을 활용하여 인장/굽힘/뒤틀림 강성 및 단위길이 당 중량, 탄성 축 등을 포함한 주요설계 인자들을 도출하였으며, 이 과정에서 프롭-블레이드의 설계 중량을 예측하였다. 그리고 도출된 설계 인자들을 로터시스템 통합 해석 프로그램에 적용하여 프롭-블레이드 운영 환경에서의 동적 안정성을 분석하였으며, 로터시스템 통합 해석 프로그램을 통해 분석된 프롭-블레이드 하중을 활용하여 2차원 단면 구조 해석을 수행하여 프롭-블레이드 구조 안전성을 확인하였다. 이러한 단면 설계/해석 과정에서 설계 요구도를 만족시키지 못하거나 다른 구성품에 부정적 영향을 준 설계 결과에 대해서는 설계 변경을 수행하였으며, 이를 통해 요구도를 만족시켰다.
Cross section design of a prop-blade is carried out for VTOL(Vertical Takeoff and Landing) Quad Tilt Prop-rotor UAV with a maximum takeoff weight of 55 kg and a maximum cruising speed of 180 km/h. Design procedure for cross section design is established and design requirements for prop-blade are identified. Through the procedure, cross section design is carried out to meet the identified requirements. Main design factors including stiffness, weight per unit length, and elastic axis are obtained by using a finite element section analysis program, and the design weight of the prop-blade is predicted. The obtained design factors are used along with the rotor system analysis program CAMRAD II to evaluate the dynamic stability of prop-blade in operating environment. In addition, the prop-blade load is obtained by CAMRAD II software, and it is used to verify the safety of the prop-blade structure. If the design results are not satisfactory, design changes are made in an iterative manner until the results satisfy the design requirements.