과제정보
연구 과제 주관 기관 : Ministry of Land, Transportation and Maritime Affairs of the Korean
참고문헌
- British Standards Institution. (2007). BS EN 1993-1-6:2007: Eurocode 3: Design of Steel Structures-Part 1-6: Strength and Stability of Shell Structures. London: BSI.
- Brush, D., & Almroth, B. (1975). Buckling of bars, plates, and shells. New York: McGraw-Hill.
- Det Norske Veritas, A. S. (2013). DNV-RP-C208: Determination of structural capacity by non-linear finite element analysis methods. Oslo: Det Norske Veritas.
- Dimopoulos, C. A., & Gantes, C. J. (2012). Experimental investigation of buckling of wind turbine tower cylindrical shells with opening and stiffening under bending. Thin-Walled Structures, Elsevier Science Limited, 54, 140-155. https://doi.org/10.1016/j.tws.2012.02.011
- Dimopoulos, C. A., & Gantes, C. J. (2013). Comparison of stiffening types of the cutout in tubular wind turbine towers. Journal of Constructional Steel Research, Elsevier Science Limited, 83, 62-74. https://doi.org/10.1016/j.jcsr.2012.12.016
- Dnv, G. L. A. S. (2017). DNVGL-RP-C202: Buckling strength of shells. Oslo: DNV GL.
- Fereidoon, A., Kolasangiani, K., Akbarpour, A., & Shariati, M. (2013). Study on buckling of steel cylindrical shells with an elliptical cutout under combined loading. Journal of Computational and Applied Research in Mechanical Engineering, 3(1), 13-25.
- Germanischer Lloyd Renewables Certification. (2012). Guideline for the Certification of Off shore Wind Turbine. Hamburg: GL Renewables Certification.
- Jang, M. S., Park, J. S., Lee, Y. W., Kang, S. Y., & Kang, Y. J. (2015). A study of the effect of imperfection on buckling strength in thin cylindrical shells under bending. Journal of Korea Academia-Industrial Cooperation Society, 16(3), 2263-2271. https://doi.org/10.5762/KAIS.2015.16.3.2263
- Kougias, L. (2009). A study of the effect of imperfections on buckling capability in thin cylindrical shells under axial loading. Master Thesis, Rensselaer Polytechnic Institute: Hartford.
- Lancaster, E. R., Calladine, C. R., & Palmer, S. C. (2000). Paradoxical buckling behaviour of a thin cylindrical shell under axial compression. International Journal of Mechanical Sciences, Elsevier Science Limited, 42(5), 843-865. https://doi.org/10.1016/S0020-7403(99)00030-2
- Reyno, H. (2016). The ultimate strength for the lower segment of tubular steel wind tower with opening. Master Thesis, Sangmyung University: South Korea.
- Reyno, H., Park, J. S., & Kang, Y. J. (2015). Influence of door opening and collar stiffener on the buckling capacity of cylindrical wind tower. Indian Journal of Science and Technology, 8(25), 1-7.
- Shariati, M., & Rokhi, M. (2010). Buckling of steel cylindrical shells with an elliptical cutout. International Journal of Steel Structures, 10(2), 193-205. https://doi.org/10.1007/BF03215830
- Starnes, J. (1972). Effect of a slot on the buckling load of a cylindrical shell with a circular cutout. AAIA Journal, 10(2), 227-229. https://doi.org/10.2514/3.6564
- Tennyson, R. (1968). The effects of unreinforced circular cutouts on the buckling of circular cylindrical shells under axial compression. Journal of Engineering for Industry, 90(4), 541-546. https://doi.org/10.1115/1.3604686
- Yeh, M., Lin, M., & Wu, W. (1999). Bending buckling of an elastoplastic cylindrical shell with a cutout. Engineering Structures, 21(11), 996-1005. https://doi.org/10.1016/S0141-0296(98)00058-3
- Young, W., Budynas, R., & Sadegh, A. (2011). Roark's formulas for stress and strain (8th ed.). New York: McGraw-Hill.
피인용 문헌
- A Novel Tripod Concept for Onshore Wind Turbine Towers vol.14, pp.18, 2021, https://doi.org/10.3390/en14185772
- Structural Behavior of Large-Diameter Cylindrical Shell with Stiffened Opening vol.11, pp.9, 2018, https://doi.org/10.3390/met11091413
- Recent Advances in Vibration Control Methods for Wind Turbine Towers vol.14, pp.22, 2021, https://doi.org/10.3390/en14227536