과제정보
연구 과제 주관 기관 : Central Universities, Northeastern University, National Natural Science Foundation of China
참고문헌
- J. Yang, H.Z. Huang, L.P. He, et al., Risk evaluation in failure mode and effects analysis of aircraft turbine rotor blades using Dempster-Shafer evidence theory under uncertainty, Eng. Fail. Anal. 18 (8) (2011) 2084-2092. https://doi.org/10.1016/j.engfailanal.2011.06.014
- M. Hetmanczyk, L. Swadzba, B. Mendala, Advanced materials and protective coatings in aero-engines application, J. Achiev. Mater. Manuf. Eng. 24 (1) (2007) 372-381.
- J.R. Greer, J.T.M. De Hosson, Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect, Prog. Mater. Sci. 56 (6) (2011) 654-724. https://doi.org/10.1016/j.pmatsci.2011.01.005
- M. Ghidelli, M. Sebastiani, K.E. Johanns, et al., Effects of indenter angle on micro‐scale fracture toughness measurement by pillar splitting, J. Am. Ceram. Soc. 100 (2017) 5731-5738. https://doi.org/10.1111/jace.15093
- F. Yin, Y. Ohsawa, A. Sato, et al., Characterization of the strain-amplitude and frequency dependent damping capacity in the M2052 alloy, Mater. Trans. 42 (3) (2001) 385-388. https://doi.org/10.2320/matertrans.42.385
- M. Dao, L. Lu, R.J. Asaro, et al., Toward a quantitative understanding of mechanical behavior of nanocrystalline metals, Acta Mater. 55 (12) (2007) 4041-4065. https://doi.org/10.1016/j.actamat.2007.01.038
- S.S. Liu, Y.H. Wen, Z.Z. Zhu, CONDENSED MATTER: STRUCTURE, THERMAL AND MECHANICAL PROPERTIES: the elastic properties and energy characteristics of Au nanowires: an atomistic simulation study, Chin. Phys. B 17 (2008) 2621-2626. https://doi.org/10.1088/1674-1056/17/7/045
- D.P. Tracy, D.B. Knorr, Texture and microstructure of thin copper films, J. Electron. Mater. 22 (6) (1993) 611-616. https://doi.org/10.1007/BF02666406
- D.R. Clarke, Oxides for high temperature vibration damping of turbine coatings, Adv. Ceram. Coatings Interfaces IV (2010) 1-7.
- F. Kroupa, J. Plesek, Nonlinear elastic behavior in compression of thermally sprayed materials, Mater. Sci. Eng. A328 (2002) 1-7.
- T.H.T. Nguyen, J.C. Chen, C. Hu, et al., Numerical analysis of thermal stress and dislocation density distributions in large size multi-crystalline silicon ingots during the seeded growth process, J. Cryst. Growth 468 (2017) 316-320. https://doi.org/10.1016/j.jcrysgro.2016.09.061
- Rashid K. Abu Al-Rub, Anthony N. Palazotto, Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults, Int. J. Solid Struct. 47 (2010) 2131-2142. https://doi.org/10.1016/j.ijsolstr.2010.04.016
- Y. Mishin, M.J. Mehl, D.A. Papaconstantopoulos, et al., Structural stability and lattice defects in copper: ab initio, tight-binding, and embedded-atom calculations, Phys. Rev. B 63 (22) (2001) 224106. https://doi.org/10.1103/PhysRevB.63.224106
- S. Nose, A computer dynamics method for simulations in the canonical ensemble, Mol. Phys. 52 (1984) 255-268. https://doi.org/10.1080/00268978400101201
- W.G. Hoover, Canonical dynamics-equilibrium phase-space distributions, Phys. Rev. A 31 (1985) 1695-1697. https://doi.org/10.1103/PhysRevA.31.1695
- E. Hosseini, M. Kazeminezhad, A new microstructural model based on dislocation generation and consumption mechanisms through severe plastic deformation, Comput. Mater. Sci. 50 (3) (2011) 1123-1135. https://doi.org/10.1016/j.commatsci.2010.11.012
- H. Watanabe, T. Sawada, Y. Sasakura, et al., Microyielding and damping capacity in magnesium, Scripta Mater. 87 (2014) 1-4. https://doi.org/10.1016/j.scriptamat.2014.06.004
- J.C. Swartz, J. Weertman, Modification of the Koehler‐Granato‐Lücke dislocation damping theory, Acta Metall. 10 (4) (1962) 1860-1865.
- D. Qin, J. Wang, Y. Chen, et al., Effect of long period stacking ordered structure on the damping capacities of Mg-Ni-Y alloys, Mater. Sci. Eng. A 624 (2015) 9-13. https://doi.org/10.1016/j.msea.2014.11.011
- L.I.U. Di, Z. Liu, E. Wang, Evolution of twins and texture and its effects on mechanical properties of AZ31 magnesium alloy sheets under different rolling process parameters, Trans. Nonferrous Met. Soc. China 25 (11) (2015) 3585-3594. https://doi.org/10.1016/S1003-6326(15)63999-1
- V.M. Chernov, O.V. Kamaeva, Dislocation internal friction at random external loadings, Mater. Sci. Eng. A 370 (1-2) (2004) 246-252. https://doi.org/10.1016/j.msea.2003.07.012
- D. Wan, J. Wang, Internal friction peaks in Mg-0.6% Zr and Mg-Ni high damping magnesium alloys, Rare Metal Mater. Eng. 46 (10) (2017) 2790-2793. https://doi.org/10.1016/S1875-5372(18)30008-0
- H. Somekawa, T. Tsuru, H. Somekawa, et al., Effect of alloying elements on grain boundary sliding in magnesium binary alloys; Experimental and numerical studies, Mater. Sci. Eng. A (2017) 708.
- J. Li, Q. Fang, Y. Liu, et al., A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding, Appl. Surf. Sci. 303 (2014) 331-343. https://doi.org/10.1016/j.apsusc.2014.02.178
- M. Ghidelli, M. Sebastiani, C. Collet, et al., Determination of the elastic moduli and residual stresses of freestanding Au-TiW bilayer thin films by nanoindentation, Mater. Des. 106 (2016) 436-445. https://doi.org/10.1016/j.matdes.2016.06.003
- P. Andric, W.A. Curtin, New theory for mode I crack-tip dislocation emission, J. Mech. Phys. Solid. 106 (2017) 315-337. https://doi.org/10.1016/j.jmps.2017.06.006
- C. Hu, On the relation of grain orientation and opening crack of an Al-Cu-Mg sheet, Engineering 9 (05) (2017) 510. https://doi.org/10.4236/eng.2017.95031
- Y. Ding, X. Cao, G. Weng, et al., Crack growth behavior of natural rubber influenced by functionalized carbon nanotubes, J. Appl. Polym. Sci. 134 (9) (2017).
- I. Argatov, V.L. Popov, T. Rademacher, et al., A model of a breathing crack with relaxation damping, Int. J. Eng. Sci. 93 (2015) 46-50. https://doi.org/10.1016/j.ijengsci.2015.05.001
- J. Zeng, H. Ma, W. Zhang, et al., Dynamic characteristic analysis of cracked cantilever beams under different crack types, Eng. Fail. Anal. 74 (2017) 80-94. https://doi.org/10.1016/j.engfailanal.2017.01.005
피인용 문헌
- Internal Friction at the Grain Boundaries with Elongated Pores vol.45, pp.2, 2018, https://doi.org/10.1134/s106378501902010x
- Contribution of Grain Boundary Pores to the High-Temperature Background of Internal Friction in Metals with Ultrafine Grain vol.84, pp.9, 2020, https://doi.org/10.3103/s1062873820090221