DOI QR코드

DOI QR Code

Novel optimal intensity measures for probabilistic seismic analysis of RC high-rise buildings with core

  • Pejovic, Jelena R. (The Faculty of Civil Engineering, University of Montenegro) ;
  • Serdar, Nina N. (The Faculty of Civil Engineering, University of Montenegro) ;
  • Pejovic, Radenko R. (The Faculty of Civil Engineering, University of Montenegro)
  • 투고 : 2018.05.06
  • 심사 : 2018.07.31
  • 발행 : 2018.10.25

초록

In this paper the new intensity measures (IMs) for probabilistic seismic analysis of RC high-rise buildings with core wall structural system are proposed. The existing IMs are analysed and the new optimal ones are presented. The newly proposed IMs are based on the existing ones which: 1) comprise a wider range of frequency velocity spectrum content and 2) are defined as the integral along the velocity spectrum. In analysis characteristics of optimal IMs such as: efficiency, practicality, proficiency and sufficiency are considered. As prototype buildings, RC high-rise buildings with core wall structural system and with characteristic heights: 20-storey, 30-storey and 40-storey, are selected. The non-linear 3D models of the prototype buildings are constructed. 720 non-linear time-history analyses are conducted for 60 ground motion records with a wide range of magnitudes, distances to source and various soil types. Statistical processing of results and detailed regression analysis are performed and appropriate demand models which relate IMs to demand measures (DMs), are obtained. The conducted analysis has shown that the newly proposed IMs can efficiently predict the DMs with minimum dispersion and satisfactory practicality as compared to the other commonly used IMs (e.g., PGA and $S_a(T_1)$). The newly proposed IMs overcome difficulties in calculating of integral along the velocity spectrum and present adequate replacement for IMs which comprise a wider range of frequency velocity spectrum content.

키워드

참고문헌

  1. Ambraseys, N., Smit, P., Sigbjornsson, R., Suhadolc, P. and Margaris, B. (2002), Internet-site for European Strong-motion Ddata, European Commission, Directorate-General XII, Environmental and Climate Programme, Brussels, Belgium.
  2. Baker, J.W. and Cornell, C.A. (2005), "A vectored-valued ground motion intensity measure consisting of spectral acceleration and epsilon", Earthq. Eng. Struct. Dyn., 34(10), 1193-1217. https://doi.org/10.1002/eqe.474
  3. Bavaghar, Y. and Bayat, M. (2017), "Seismic fragility curves for highly skewed highway bridges", J. Vibroeng., 19(4), 2749-2758. https://doi.org/10.21595/jve.2017.18340
  4. Bayat, M. and Daneshjoo, F. (2015), "Seismic performance of skewed highway bridges using analytical fragility function methodology", Comput. Concrete, 16(5), 723-740. https://doi.org/10.12989/cac.2015.16.5.723
  5. Bayat, M., Daneshjoo, F. and Nistico, N. (2015a), "Probabilistic sensitivity analysis of multi-span highway bridges", Steel Compos. Struct., 19(1), 237-262. https://doi.org/10.12989/scs.2015.19.1.237
  6. Bayat, M., Daneshjoo, F. and Nistico, N. (2015b), "A novel proficient and sufficient intensity measure for probabilistic analysis of skewed highway bridges", Struct. Eng. Mech., 55(6), 1177-1202. https://doi.org/10.12989/sem.2015.55.6.1177
  7. Bayat, M., Daneshjoo, F. and Nistico, N. (2017), "The effect of different intensity measures and earthquake directions on the seismic assessment of skewed highway bridges", Earthq. Eng. Eng. Vib., 16(1), 165-179. https://doi.org/10.1007/s11803-017-0375-z
  8. CTBUH (2011), The Tallest 20 in 2020: Entering the Era of the Megatall, The Council on Tall Buildings and Urban Habitat Illinois Institute of Technology, Chicago, USA.
  9. EN1992-1-1 (2004), Design of Concrete Structures. Part 1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  10. EN1998-1 (2004), Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  11. EN1998-3 (2005), Design of Structures for Earthquake Resistance. Part 3: Assessment and Retrofitting of Buildings, European Committee for Standardization, Brussels, Belgium.
  12. ETABS (2013), ETABS 2013 Integrated Analysis, Design and Drafting of Buildings Systems, CSI Computers & Structures Inc., Berkeley, USA.
  13. Giardini, D., Woessner, J., Danciu, L., Crowley, H., Cotton, F., Grunthal, G., ... and Valensise, G. (2013), SHARE European Seismic Hazard Map for Peak Ground Acceleration, 10% Exceedance Probabilities in 50 years, Erdbebengefahrenkarte, Zurich, ETH Zurich.
  14. Giovenale, P., Cornell, A.C. and Esteva, L. (2004), "Comparing the adequacy of alternative ground motion intensity measures for the estimation of structural responses", Earthq. Eng. Struct. Dyn., 33(8), 951-979. https://doi.org/10.1002/eqe.386
  15. HAZUS MR4 (2003), Technical Manual, Multi-hazard Loss Estimation Methodology - Earthquake Model, National Institute of Building Sciences, Federal Emergency Management Agency, Ishington DC.
  16. Ji, J., Elnashai, A.S and Kuchma, D.A. (2009), "Seismic fragility relationships for reinforced concrete high-rise buildings", Struct. Des. Tall Spec. Build., 18(3), 259-277. https://doi.org/10.1002/tal.408
  17. Ji, J., Elnashai, A.S. and Kuchma, D.A. (2007), "Seismic fragility assessment for reinforced concrete high-rise buildings", Research Report No. 07-14, Mid-America Earthquake Center, University of Illinois at Urbana-Champaign.
  18. Kostinakis, K.G. and Athanatopoulou, A.M. (2015), "Evaluation of scalar structure-specific ground motion intensity measures for seismic response prediction of earthquake resistant 3D buildings", Earthq. Struct., 9(5), 1091-1114. https://doi.org/10.12989/eas.2015.9.5.1091
  19. Lu, X., Lu, X.Z. and Ye, L.P. (2012), "Discussion on the ground motion intensity measures for super high-rise buildings", China Civil Eng. J., 45(1), 292-296.
  20. Lu, X., Ye, L., Lu, X., Li, M. and Ma, X. (2013), "An improved ground motion intensity measure for super high-rise buildings", Sci. China Tech. Sci., 56(6), 1525-1533. https://doi.org/10.1007/s11431-013-5234-1
  21. Luco, N. and Cornell, C.A. (2007), "Structure-specific scalar intensity measures for near-source and ordinary earthquake motions", Earthq. Spectra, 23(2), 357-391. https://doi.org/10.1193/1.2723158
  22. Mackie, K. and Stojadinovic, B. (2001), "Probabilistic seismic demand model for California bridges", J. Bridge Eng., 6(6), 468-480. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(468)
  23. Martinez-Rueda, J.E. (1998), "Scaling procedure for natural accelerograms based on a system of spectrum intensity scales", Earthq. Spectra, 14(1), 135-152. https://doi.org/10.1193/1.1585992
  24. Matsumura, K. (1992), "On the intensity measure of string motions related to structural failures", Proceedings 10WCEE, Madrid, July.
  25. Mosalem, K.M., Ayala, G., White, R.N. and Roth, C. (1997), "Seismic fragility of LRC frames with and without Masonry infill walls", J. Earthq. Eng., 1(4), 693-719. https://doi.org/10.1080/13632469708962384
  26. Nagashree, B.K., Kumar, R.C.M. and Reddy, V.D. (2016), "A parametric study on seismic fragility analysis of RC buildings", Earthq. Struct., 10(3), 629-643. https://doi.org/10.12989/eas.2016.10.3.629
  27. Padgett, J.E., Nielson, B.G. and DesRoches, R. (2008), "Selection of optimal intensity measures in probabilistic seismic demand models of highway bridge portfolios", Earthq. Eng. Struct. Dyn., 37(5), 711-726. https://doi.org/10.1002/eqe.782
  28. PEER (2010), Technical Report for the PEER Ground Motion Database Web Application, Pacific Earthquake Engineering Research Center, University of California, Berkeley, USA.
  29. PEER TBI (2014), Tall Buildings Initiative, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
  30. Pejovic, J. and Jankovic, S. (2015), "Dependence of RC high-rise buildings response on the earthquake intensity", J. Croatian Assoc. Civil Eng., 67(8), 749-759.
  31. Pejovic, J.R (2016), "Seismic analysis of reinforced concrete highrise building", Ph.D. Dissertation, Faculty of Civil Engineering Podgorica, University of Montenegro, Podgorica.
  32. Pejovic, J.R., Serdar, N.N. and Pejovic, R.R. (2017), "Optimal intensity measures for probabilistic seismic demand models of RC high-rise buildings", Earthq. Struct., 13(3), 221-230. https://doi.org/10.12989/EAS.2017.13.3.221
  33. PERFORM (2006), PERFORM 3D Nonlinear Analysis and Performance Assessment for 3D Structures, CSI Computers & Structures Inc., Berkeley, USA.
  34. Powell, G.H. (2007), PERFORM 3D Detailed Example of a Tall Shear Wall Building-Nonlinear Modeling, Analysis and Performance Assessment for Earthquake Loads, Computers & Structures Inc., Berkeley, USA.
  35. Rossetto, T. and Elnashai, A. (2003), "Derivation of vulnerability functions for European-type RC structures based on observational data", Eng. Struct., 25(10), 1241-1263. https://doi.org/10.1016/S0141-0296(03)00060-9
  36. Shome, N. (1999), "Probabilistic seismic demand analysis of nonlinear structures", Ph.D. Dissertation, Stanford University, Stanford.
  37. Shome, N., Cornell, C.A., Bazzurro, P. and Carballo, J.E. (1998) "Earthquakes, records and nonlinear responses", Earthq. Spectra, 14(3), 469-500. https://doi.org/10.1193/1.1586011
  38. Singhal, A. and Kiremidjian, A. S., (1997), "A method for earthquake motion-damage relationships with application to reinforced concrete frames", NCEER-97-0008, National Center for Earthquake Engineering Research, State Univ. of New York at Buffalo.
  39. Stewart, J.P., Chiou, S.J., Bray, J.D., Graves, R.W., Somerville, P.G. and Abrahamson, N.A. (2002), "Ground motion evaluation procedures for performance-based design", Soil Dyn. Earthq. Eng., 22(9), 765-772. https://doi.org/10.1016/S0267-7261(02)00097-0
  40. Su, N., Lu, X., Zhou, Y. and Yang, T.Y. (2017), "Estimating the peak structural response of high-rise structures using spectral value-based intensity measures", Struct. Des. Tall Spec. Build., 26(8), 1-8.
  41. Taranath, B.S. (2010), Reinforced Concrete Design of Tall Buildings, International Code Council, Concrete Reinforcing Steel Institute, CRC Press Taylor & Francis Group, Boca Raton, USA.
  42. Tothong, P. and Luco, N. (2007), "Probabilistic seismic demand analysis using advanced intensity measures", Earthq. Eng. Struct. Dyn., 36(13), 1837-1860. https://doi.org/10.1002/eqe.696
  43. Vamvatsikos, D. and Cornell, C.A. (2005), "Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information", Earthq. Eng. Struct. Dyn., 34(13), 1573-1600. https://doi.org/10.1002/eqe.496
  44. Zhang, Y., He, Z., Lu, W. and Yang, Y. (2017), "A spectralacceleration- based linear combination-type earthquake intensity measure for high-rise buildings", J. Earthq., 1-30.

피인용 문헌

  1. Seismic fragility analysis of RC frame-core wall buildings under the combined vertical and horizontal ground motions vol.20, pp.2, 2018, https://doi.org/10.12989/eas.2021.20.2.175