DOI QR코드

DOI QR Code

Analysis of Efficiency and Loss due to Number of Poles in Magnetic Gears

마그네틱 기어의 극수 변화에 따른 효율 및 손실 분석

  • Received : 2018.07.05
  • Accepted : 2018.10.15
  • Published : 2018.10.31

Abstract

Mechanical gears driven by direct contact have problems including noise, vibration and heat. In order to, solve these problems, magnetic gears having a non-contact magnetic coupling have been proposed. Through various studies on magnetic gears, we found that losses are changed when the number of magnetic poles varies in the same gear ratio. For this reason, research team expect the iron loss of the magnetic gear and the Eddy current loss of the permanent magnet will have a certain tendency depending on the number of poles. This paper identified the magnetic gear's loss tendency according to the number of poles, and laid the basis for efficiency improvement design.

직접 접촉 방식의 기계적인 결합을 사용하는 기어는 접촉 마찰로 인한 소음, 진동, 발열 등의 문제가 지속적으로 제기되어왔기 때문에, 비접촉 자기(magnetic)결합을 이용한 마그네틱 기어(magnetic gear)가 제안되었다. 마그네틱 기어에 대한 연구 중 동일한 기어비에서 극수에 따라 손실의 차이가 발생함을 확인하였으며, 철손과 영구자석 와류손이 극수에 따라 일정한 경향성을 보일 것으로 예상되어 연구를 진행하였다. 본 논문에서는 마그네틱 기어의 극수에 따른 경향성을 확인하고 구체화하여 마그네틱 기어의 효율 개선 설계의 기반을 마련하였다.

Keywords

References

  1. H. Huh and J. Lee, "A Study on The Modeling and Operation Control of A Variable Speed Synchronous Wind Power System," J. of the Korea Institute of Electronic Communication Science, vol. 10, no. 8, 2015, pp. 935-944. https://doi.org/10.13067/JKIECS.2015.10.8.935
  2. K. Atallah, D. Calverley, and D. Howe, "Design, Analysis And Realisation Of A Highperformance Magnetic Gear," IEEE Trans. Power Delivery, vol. 151, no. 2, 2004, pp. 135-143.
  3. K. Lee, W. Cho, J. Back, and I. Choy, "Design and Verification of Disturbace Observer based Controller for Windturbine with Two Cooperative Generators," J. of the Korea Institute of Electronic Communication Science, vol. 12, no. 2, 2017, pp. 301-308. https://doi.org/10.13067/JKIECS.2017.12.2.301
  4. L. Shah, A. Cruden, and B. Williams, "A Variable Speed Magnetic Gear Box Using Contra-Rotating Input Shafts," IEEE Trans. Magnetics, vol. 47, no. 2, 2011, pp. 431-438. https://doi.org/10.1109/TMAG.2010.2097273
  5. K. Atallah, S. Dalverley, and D. Howe, "Design, analysis and realisation of a highperformance magnetic gear," IEEE Trans. Power Delivery, vol. 151, no. 2, 2004, pp. 135-143.
  6. Y. Kim, J. Song, and G. Lee, "How to Acquire the Evidence Capability of Video Images Taken by Drone," J. of the Korea Institute of Electronic Communication Science, vol. 13, no. 1, 2018, pp. 163-168. https://doi.org/10.13067/JKIECS.2018.13.1.163
  7. K. Yoon, S. Lee, and Y. Han, S. Kim, "A Study on Flight Stabilization of Drones by Gyro Sensor and PID Control," J. of the Korea Institute of Electronic Communication Science, vol. 12 no. 4, 2017, pp. 591-598. https://doi.org/10.13067/JKIECS.2017.12.4.591
  8. K. Atallah, and D. Howe, "A Novel High-Performance Magnetic Gear," IEEE Trans. Magnetics, vol. 37, no. 4, 2001, pp. 2844-2846. https://doi.org/10.1109/20.951324
  9. H. M. Shin, J. H. Chang, "Analysis of Coaxial Magnetic Gear with Low Gear Ratios for Application in Counter Rotating Systems," J. of Magnetics, vol. 20, no. 2, 2015, pp. 186-192. https://doi.org/10.4283/JMAG.2015.20.2.186
  10. C. Kim, E. Park, S. Kim, and Y. Kim, "An Study on Pole Piece Shape for Improving Torque Ripple of Magnetic Gears," J. of the Korea Institute of Electronic Communication Science, vol. 12, no. 6, 2017, pp. 1065-1070. https://doi.org/10.13067/JKIECS.2017.12.6.1065