한국기계기술학회지 (Journal of the Korean Society of Mechanical Technology)

  • 제20권6호
  • /
  • Pages.757-762
  • /
  • 2018
  • /
  • 1229-604X(pISSN)
  • /
  • 2508-3805(eISSN)
한국기계기술학회 (Korean Society of Mechanical Technology)
권호 표지
DOI QR코드

DOI QR Code

LDV를 이용한 토크컨버터 내 유동의 실험적 분석

Experimental Analyses of Flow in a Production Torque Converter Using LDV

  • Yoo, S.C. (Department of mechanical and automotive engineering of Halla University)
  • 투고 : 2018.09.28
  • 심사 : 2018.10.29
  • 발행 : 2018.12.28
⟨ 이전 논문 다음 논문 ⟩

초록

LDV(laser Doppler velocimetry) measurements were conducted on the exit region of the impeller passage and the gap between the impeller and turbine blades under 0.8 speed ratio. The 0.8 speed ratio has an impeller speed of 2000rpm and a turbine speed of 1600rpm. A periodic variation of the mass flow rate is present in many of the measurements made. The frequency of this variation is the same as the frequency of the turbine blades passing the impeller passage exit. It is found that the instantaneous position of the turbine had effect on fluid flow inside the impeller passage and gap region. This study would aid in the construction of higher accuracy CFD models of this complex turbomachinery device.

키워드

참고문헌

  1. W. Fister and F. W. Adrian, "Experimental Researches of Flow in Hydrodynamic Torque Converters," Proceeding of the 7th Conference of Fluid Machinery in Budapest, Hungary, Vol. 1, pp. 210-224, 1983
  2. R. R. By and J. E. Maloney, "Technology Needs for the Automotive Torque Converter-Part I: Internal Flow, Blade Design, and Performance," SAE Paper No. 880482, 1988
  3. H. M. Bahr, R. D. Flack, R. R. By and J. J. Zhang, "Laser Velocimetry Measurements in the Stator of a Torque Converter," SAE Paper No. 901769, 1990
  4. R. R. By and B. Lakshminarayna, "Measurement and Analysis of Static Pressure Field in a Torque Converter Pump," Journal of Fluids Engineering, Vol. 117, pp. 109-115, March 1995 https://doi.org/10.1115/1.2816798
  5. J. K. Gruver, R. D. Flake and K. Brun, "Laser Velocimeter Measurements on the pump of an Automotive Torque Converter-Part I: Average Measurements," Transactions of the ASME, Vol. 118, pp. 562-569, July 1996 https://doi.org/10.1115/1.2822668
  6. L. Dalimonte, M. Foster, M. Novak, K. Lee, and H. Schock, "Measurements of Flows in the Impeller and Turbine Side of an Automotive Torque Converter at 0.4 and 0.8 Speed Ratio," Thesis, Michigan State University, E. Lansing, Michigan, 1998
  7. M. Foster, M. Novak, K. Lee and H. Schock, "A Quantitative Study of Primary Flow Fields within an Automotive Torque Converter Using Laser Doppler Velocimetry," MSUERL Report, Michigan State University, 1998
  8. B. Lakshminarayna and T. W. Backstorm, "Perspective: Fluid Dynamics and Performance of Automotive Torque Converters: An Assessment," Journal of Fluids Engineering, Vol. 118, pp. 665-676, December 1996 https://doi.org/10.1115/1.2835494
  9. J. K. Gruver, R. D. Flake and K. Brun, "Laser Velocimeter Measurements on the pump of an Automotive Torque Converter-Part II: Unsteady Measurements," Transactions of the ASME, Vol. 118, pp. 570-577, July 1996 https://doi.org/10.1115/1.2822670
  10. K. Lee, S.-C. Yoo and H. Schock, "Quantification of Primary Flows of a Torque Converter Using Laser Doppler Velocimetry," SAE Paper No. 2000-05-0106, 2000
  11. S. C. Yoo, "Intake System Effects on Turbulent Kinetic Energy for the In-Cylinder Flow of a Four-Valve SI Engine," Journal of the Korean Society of Mechanical Technology, Vol. 19, No. 6, pp. 771-777, 2017 https://doi.org/10.17958/ksmt.19.6.201712.771
  12. S. C. Yoo, "Development of the Design and Manufacturing Technologies of the Experimental Four-Valve SI Engine for In-Cylinder Air Flow Study Using the Laser Based Flow Diagnostic Techniques," Journal of the Korean Society of Mechanical Technology Vol. 20, No. 3, pp. 377-382, 2018 https://doi.org/10.17958/ksmt.20.3.201806.377