DOI QR코드

DOI QR Code

Removable shear connector for steel-concrete composite bridges

  • Suwaed, Ahmed S.H. (Institute for Infrastructure and Environment, Herriot-Watt University) ;
  • Karavasilis, Theodore L. (Faculty of Engineering and the Environment, University of Southampton)
  • 투고 : 2018.05.25
  • 심사 : 2018.07.31
  • 발행 : 2018.10.10

초록

The conception and experimental assessment of a removable friction-based shear connector (FBSC) for precast steel-concrete composite bridges is presented. The FBSC uses pre-tensioned high-strength steel bolts that pass through countersunk holes drilled on the top flange of the steel beam. Pre-tensioning of the bolts provides the FBSC with significant frictional resistance that essentially prevents relative slip displacement of the concrete slab with respect to the steel beam under service loading. The countersunk holes are grouted to prevent sudden slip of the FBSC when friction resistance is exceeded. Moreover, the FBSC promotes accelerated bridge construction by fully exploiting prefabrication, does not raise issues relevant to precast construction tolerances, and allows rapid bridge disassembly to drastically reduce the time needed to replace any deteriorating structural component (e.g., the bridge deck). A series of 11 push-out tests highlight why the novel structural details of the FBSC result in superior shear load-slip displacement behavior compared to welded shear studs. The paper also quantifies the effects of bolt diameter and bolt preload and presents a design equation to predict the shear resistance of the FBSC.

키워드

참고문헌

  1. ASCE (2014), Report card for America's infrastructure - Bridges, Retrieved from; http://www.infrastructurereportcard.org/a/#p/bridges/conditionsand-capacity (23 October 2016)
  2. Ataei, A. and Bradford, M.A. (2014), "FE modelling of sustainable semi-rigid flush end plate composite joints with deconstructable bolted shear connectors", Proceedings of the International Conference on Composite Construction in Steel and Concrete, ASCE, Australia.
  3. Ataei, A., Bradford, M.A. and Liu, X. (2016), "Experimental study of composite beams having a precast geopolymer concrete slab and deconstructable bolted shear connectors", Eng. Struct., 114, 1-13. https://doi.org/10.1016/j.engstruct.2015.10.041
  4. Badie, S.S. and Tadros, M.K. (2008), "Full-Depth Precast Concrete Bridge Deck Panel Systems", Transportation Research Board, Washington, D.C., USA.
  5. Ban, H., Uy, B., Pathirana, S.W., Henderson, I., Mirza, O. and Zhu, X. (2015), "Time-dependent behaviour of composite beams with blind bolts under sustained loads", J. Constr. Steel Res., 112, 196-207. https://doi.org/10.1016/j.jcsr.2015.05.004
  6. Bickford, H.J. (1995), An Introduction to the Design and Behaviour of Bolted Joints, (3rd Ed.), Marcel Dekker, Inc., New York, USA.
  7. Biswas, M. (1986), "On modular full depth bridge deck rehabilitation", J. Trans. Eng. (ASCE), 112(1), 105-120. https://doi.org/10.1061/(ASCE)0733-947X(1986)112:1(105)
  8. Bradford, M.A. and Pi, Y.-L. (2012), "Computational Modelling of Deconstructable Composite Steel-Concrete Beams", Proceedings of the 11th International Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, Scotland.
  9. BSI (British Standards Institution) (1976), Specifications for Building sands from natural sources; BS 1199, London, UK.
  10. BSI (British Standards Institution) (1994), Draft for Development: Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings; BS EN 1994-1-1, London, UK.
  11. BSI (British Standards Institution) (2004), Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings; BS EN 1994-1-1, London, UK.
  12. BSI (British Standards Institution) (2005a), Eurocode 4: Design of composite steel and concrete structures, Part 1-2: General rules and rules for Bridges; BS EN 1994-2, London, UK.
  13. BSI (British Standards Institution) (2005b), Eurocode 3: Design of steel structures, Part 1-1: General rules and rules for buildings; BS EN 1994-1-1, London, UK.
  14. BSI (British Standards Institution) (2005c), High-strength structural bolting assemblies for preloading, Part 3: System HR, Hexagon bolt and nut assemblies; BS EN 14399-3, London, UK.
  15. BSI (British Standards Institution) (2005d), High-strength structural bolting assemblies for preloading, Part 6: Part 5: Plain chamfered washers; BS EN 14399-6, London, UK.
  16. BSI (British Standards Institution) (2009a), High-strength structural bolting assemblies for preloading, Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies; BS EN 14399-9, London, UK.
  17. BSI (British Standards Institution) (2009b), Metallic materials - Tensile testing, Part 1: Method of test at ambient temperature; BS EN ISO 6892-1, London, UK.
  18. BSI (British Standards Institution) (2010), Eurocode - Basis of structural design; BS EN 1990:2002+A1:2005, London, UK.
  19. Chen, Y-T., Zhao, Y., West, J.S. and Walbridge, S. (2014), "Behavior of steel-precast composite girders with through-bolt shear connectors under static loading", J. Constr. Steel Res., 103, 168-178.
  20. Chesson, E., Jr., Faustino, N.L. and Munse, W.H. (1965), "Highstrength bolts subjected to tension and shearear", J. Struct. Div., ASCE, 91(5), 155-180.
  21. Dai, X., Lam, D. and Saveri, E. (2015), "Effect of Concrete Strength and Stud Collar Size to Shear Capacity of Demountable Shear Connectors", J. Struct. Eng. DOI: 10.1061/(ASCE)ST.1943-541X.0001267, 04015025
  22. Dallam, L.N. (1968), "High Strength Bolt Shear Connectors - Pushout Tests", ACI Journal, 65(9), 767-769.
  23. Dallam, L.N. and Harpster, J.L. (1968), "Composite beam tests with high-strength bolt shear connectors", Report 68-3; Missouri State Highway Department, USA.
  24. Dedic, D.J. and Klaiber, F.W. (1984), "High-strength bolts as shear connectors in rehabilitation work", Concrete Int., 6(7), 41-46.
  25. Deng, Y., Phares, B.M., Dang, H. and Dahlberg, J.M. (2016), "Impact of Concrete Deck Removal on Horizontal Shear Capacity of Shear Connections", J. Bridge Eng., 21(3), 04015059. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000832
  26. Feidaki, E. and Vasdravellis, G. (2017), "Push out tests of a novel shear connection mechanism for use in demountable precast composite beams", Ce/papers, 1:2060-2069. DOI: 10.1002/cepa.251
  27. Hallmark, R. (2012), "Prefabricated Composite Bridges - a Study of Dry Joints", Licentiate thesis, Department of Civil, Mining and Natural Resources Engineering, Lulea University of technology, Sweden.
  28. Heistermann, C. (2011), "Behaviour of Pretensioned Bolts in Friction Connections: Towards the Use of Higher Strength Steels in Wind Towers", Licentiate Thesis; Lulea University of Technology, Lulea, Sweden.
  29. Henderson, I.E.J., Zhu, X.Q., Uy, B. and Mirza, O. (2015a), "Dynamic behaviour of steel-concrete composite beams with different types of shear connectors. Part I: Experimental study", Eng. Struct., 103, 298-307. https://doi.org/10.1016/j.engstruct.2015.08.035
  30. Henderson, I.E.J., Zhu, X.Q., Uy, B. and Mirza, O. (2015b), "Dynamic behaviour of steel-concrete composite beams with different types of shear connectors. Part II: Modelling and comparison", Eng. Struct., 103, 308-317. https://doi.org/10.1016/j.engstruct.2015.08.033
  31. Johnson, R.P. (1967), Structural Concrete, McGraw-Hill Publishing Co. Ltd., Berkshire, UK, p. 32.
  32. Johnson, R.P. (1981), "Loss of interaction in short-span composite beams and plates", J. Constr. Steel Res., 1(2), p. 11. https://doi.org/10.1016/0143-974X(81)90028-6
  33. Johnson, R.P. (2004), Composite Structures of Steel and Concrete: Volume 1: Beams, Slabs, Columns, and Frames for Buildings, (3rd Edition), Blackwell Scientific Publications, Oxford, UK, p. 32.
  34. Johnson, R.P. (2012), Designers' Guide to Eurocode 4: Design of Composite Steel and Concrete Structures, (2nd Edition), EN 1994-1-1, Thomas Telford Ltd., p. 213.
  35. Johnson, R.P. and Buckby, R.J. (1986), Composite structures of steel and concrete: Volume 2: Bridges, (2nd Edition), Collins Professional and Technical Books, London, UK, p. 63.
  36. Johnson, R.P. and May, I.M. (1975), "Partial-interaction design of composite beams", Struct. Engr., 53(8), 305-311.
  37. Kwon, G., Engelhardt, M.D. and Klinger, R.E. (2010), "Behavior of post-installed shear connectors under static and fatigue loading", J. Constr. Steel Res., 66, 532-541. https://doi.org/10.1016/j.jcsr.2009.09.012
  38. Kwon, G., Engelhardt, M.D. and Klingner, R.E. (2011), "Experimental behavior of bridge beams retrofitted with postinstalled shear connectors", J. Bridge Eng., pp. 536-545 DOI: 10.1061/(ASCE)BE.1943-5592.0000184
  39. Lam, D. and Saveri, E. (2012), "Shear capacity of demountable shear connectors", Proceedings of the 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures, Singapore.
  40. Lam, D., Dai, X. and Saveri, E. (2013), "Behaviour of Demountable Shear Connectors in Steel-Concrete Composite Beams", Proceedings of International Conference on Composite Construction in Steel and Concrete VII, ASCE, pp. 618-631.
  41. Lee, M.S.S. and Bradford, M.A. (2013), "Sustainable composite beams with deconstructable bolted shear connectors", In: Research and Applications in Structural Engineering, Mechanics and Computation, Taylor & Francis Group, London.
  42. Liu, X., Bradford, M.A. and Lee, M.S.S. (2014), "Behavior of high-strength friction-grip bolted shear connectors in sustainable composite beams", J. Struct. Eng. DOI: 10.1061/(ASCE)ST.1943-541X.0001090, 04014149
  43. Long, A.E., Basheer, P.A.M., Taylor, S.E., Rankin, B.G.I. and Kirkpatrick, J. (2008), "Sustainable bridge construction through innovative advances", Proceedings of the Institution of Civil Engineers - Bridge Engineering, Volume 161, Issue 4, pp. 183-188. https://doi.org/10.1680/bren.2008.161.4.183
  44. Marshall, W.T., Nelson, H.M. and Banerjee, H.K. (1971), "An experimental study of the use of high strength friction grip bolts as shear connectors in composite beams", Struct. Engr., 49(4), p. 175.
  45. Mirza, O., Uy, B. and Patel, N. (2010), "Behaviour and Strength of Shear Connectors Ultilising Blind Bolting", Proceedings of the 4th International Conference on Steel and Composite Structures, Sydney, Australia, pp. 791-796.
  46. Moynihan, M.C. and Allwood, J.M. (2014), "Viability and performance of demountable composite connectors", J. Constr. Steel Res., 88, 47-56.
  47. Nah, H., Lee, H., Kim, K., Kim, J. and Kim, W. (2010), "Evaluating relaxation of high-strength bolts by parameters on slip faying surfaces of bolted connections", Int. J. Steel Struct., 10(3), 295-303. https://doi.org/10.1007/BF03215838
  48. Oehlers, D.J. (1980), "Stud shear connectors for composite beams", Ph.D. Thesis; School of Engineering, University of Warwick, UK.
  49. Oehlers, D.J. and Bradford, M.A. (1995), Composite Steel and Concrete Structural Members: Fundamental Behavior, Elsevier Science Ltd., Oxford, UK.
  50. Oehlers, D.J. and Bradford, M.A. (1999), Elementary Behavior of Composite Steel & Concrete Structural Members, Butterworth-Heinemann, Oxford, UK, pp. 84-94.
  51. Oehlers, D.J. and Johnson, R.P. (1987), "The strength of stud shear connections in composite beams", Struct. Enr., 65(2), 44-48.
  52. Oehlers, D.J. and Sved, G. (1995), "Composite beams with limited-slip-capacity shear connectors", J. Struct. Eng., 121(6), 932-938. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(932)
  53. PANTURA (2011), Needs for maintenance and refurbishment of bridges in urban environments; Retrieved from; URL: http://www.pantura-project.eu/Downloads/D5.3.pdf (23 October 2016)
  54. Pathirana, S.W., Uy, B., Mirza, O. and Zhu, X. (2013), "Numerical study on the behaviour of composite steel-concrete beams utilising innovative blind bolts", Composite Construction in Steel and Concrete VII, ASCE, pp. 676-686.
  55. Pathirana, S.W., Uy, B., Mirza, O. and Zhu, X. (2015), "Strengthening of existing composite steel-concrete beams utilising bolted shear connectors and welded studs", J. Constr. Steel Res., 114, 417-430.
  56. Pathirana, S.W., Uy, B., Mirza, O. and Zhu, X. (2016), "Flexural behaviour of composite steel-concrete utilizing blind bolt shear connectors", Eng. Struct., 114, 181-194. https://doi.org/10.1016/j.engstruct.2016.01.057
  57. Pavlovic, M.S. (2013), "Resistance of Bolted Shear Connectors in Prefabricated Steel-Concrete Composite Decks", Ph.D. Thesis; University of Belgrade, Faculty of Civil Engineering, Belgrade, Serbia.
  58. Pavlovic, M., Markovic, Z., Veljkovic, M. and Budevac, D. (2013), "Bolted shear connectors vs. headed studs behavior in push-out tests", J. Constr. Steel Res., 88, 134-149. https://doi.org/10.1016/j.jcsr.2013.05.003
  59. Rehman, N., Lam, D., Dai, X. and Ashour, A.F. (2016), "Experimental study on demountable shear connectors in composite slabs with profiled decking", J. Constr. Steel Res., Volume 122, pp. 178-189. https://doi.org/10.1016/j.jcsr.2016.03.021
  60. Rowe, M. and Bradford, M.A. (2013), "Partial Shear Interaction in Deconstructable Steel-Concrete Composite Beams with Bolted Shear Connectors", Design, Fabrication and Economy of Metal Structures, International Conference Proceedings 2013, Miskolc, Hungary, pp. 585-590.
  61. Suwaed, A.S.H. (2017), "Development of demountable shear connector for precast steel concrete composite bridges", Ph.D. Thesis; School of Engineering, University of Warwick, Coventry, UK.
  62. Suwaed, A.S.H. and Karavasilis, T.L. (2017a), "Novel Demountable Shear Connector for Accelerated Disassembly, Repair, or Replacement of Precast Steel-Concrete Composite Bridges", J. Bridge Eng., 22(9), 04017052. DOI: 10.1061/(ASCE)BE.1943-5592.0001080
  63. Suwaed, A.S.H. and Karavasilis, T.L. (2017b), "Experimental evaluation of a novel demountable shear connector for accelerated repair or replacement of precast steel-concrete composite bridges", ce/papers, 1: 4163-4172. DOI: 10.1002/cepa.473
  64. Tadros, M.K. and Baishya, M.C. (1998), "Rapid replacement of bridge decks", NCHRP Rep. 407; Transportation Research Board, Washington, DC, USA.
  65. Vayas, I. and Iliopoulos, A. (2014), Design of Steel-concrete Composite Bridges to Eurocodes, CRC Press, Taylor & Francis Group, Boca Raton, FL, USA, p. 490.
  66. Xue, W., Ding, M., Wang, H. and Luo, Z. (2008), "Static behavior and theoretical model of stud shear connectors", J. Bridge Eng. (ASCE), 13(6), pp.623-634. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(623)
  67. Yuan, H. (1996), "The resistances of stud shear connectors with profiled sheeting", Ph.D. Thesis; School of Engineering, University of Warwick, Coventry, UK.

피인용 문헌

  1. Experimental study on steel-concrete composite beams with Uplift-restricted and slip-permitted screw-type (URSP-S) connectors vol.35, pp.2, 2018, https://doi.org/10.12989/scs.2020.35.2.261
  2. Static behavior of bolt connected steel-concrete composite beam without post-cast zone vol.38, pp.4, 2021, https://doi.org/10.12989/scs.2021.38.4.365
  3. New composite flooring system for the circular economy vol.40, pp.5, 2018, https://doi.org/10.12989/scs.2021.40.5.649
  4. Horizontal pushout tests and parametric analyses of a locking-bolt demountable shear connector vol.35, pp.None, 2022, https://doi.org/10.1016/j.istruc.2021.11.041