References
- Bond, L. J., Doctor, S. R. and Taylor, T. T. (2008). "Proactive management of materials degradation-a review of principles and programs (PNNL-17779)". Pacific Northwest National Laboratory Richland, WA.
- Bond, L. J., Taylor, T. T., Doctor, S. R., Hull, A. B. and Malik, S. N. (2008). "Proactive management of materials degradation for nuclear power plant systems". 2008 International Conference on Prognostics and Health Management, Denver, CO, pp. 1-9.
- Doctor, S. R. et al. (2009). "The proactive management of materials degradation (PMMD) and enhanced structural reliability". 20th International Conference on Structural Mechanics in Reactor Technology (SMiRT 20), Finland, Paper 1954.
- Rumyantev, A. N. (2006). "Quantile estimate of the uncertainties of probabilistic safety analysis for objects of the nuclear power industry". Atomic Energy, Vol. 101, No. 3, pp. 617-624. https://doi.org/10.1007/s10512-006-0141-1
- INTERNATIONAL ATOMIC ENERGY AGENCY (1998). "Component reliability data for use in probabilistic safety assessment". IAEA-TECDOC-478, IAEA, Vienna.
- Lee, T. H., Yoon, J. Y., Nam, H. O. and Hwang, I. S. (2014). "A probabilistic environmentally assisted cracking model for steam generator tubes". ASME. J. Pressure Vessel Technol., Vol. 137, No. 2, pp. 021204-021204-7.
- Kekkonen, T. and Hänninen, H. (1985). "The effect of heat treatment on the microstructure and corrosion resistance of inconel X-750 alloy". Corrosion Science, Vol. 25, No. 8/9, pp. 789-803. https://doi.org/10.1016/0010-938X(85)90011-3
- Mills, W. J., Lebo, M. R. and Kearns, J. J. (1999). "Hydrogen embrittlement, grain boundary segregation, and stress corrosion cracking of alloy X-750 in low and high-temperature water". Metall and Mat Trans A, Vol. 30, No. 6, pp. 1579-1606. https://doi.org/10.1007/s11661-999-0095-8
- Symons, D. M. and Thompson, A. W. (1996). "The effect of hydrogen on the fracture of alloy X-750". Metall and Mat Trans A, Vol. 27A, No. 1, pp. 101-110.
- Turnbull, A. et al. (1992). "Hydrogen transport in nickel-base alloys". Metallurgical Transactions A, Vol. 23, No. 12, pp. 3231-3244. https://doi.org/10.1007/BF03024530
- Grote, K. H. and Antonsson, E. K. (2009). "Springer handbook of mechanical engineering". Springer.
- Vander Voort, G. F., Lucas, G. M. and Manilova, E. P. (2004). "Metallography and microstructures of heat-resistant alloys". ASM Handbook, Vol. 9, pp. 824-864.
- Hwang, I. S. (1987). "Embrittlement mechanisms of nickel-base alloys in water". Dissertation, Department of Nuclear Engineering, Massachusetts Institute of Technology, Boston.
- Was, G. S. and Ballinger, R. G. (1980). "Hydrogen induced cracking under cyclic loading of nickel base alloys used for pwr steam generator tubing". Third Semi-Annual Progress Report, NP4613, Research Project 1166-3, EPRI.
- ASTM E647-08 (2008). "Standard test method for measurement of fatigue crack growth rates". ASTM International, West Conshohocken, PA.
- Provan, J. W. and Sih, G. (1991). "Probabilistic fracture mechanics and reliability". Martinus Nijhoff Publishers.
- Ciavarella, M. (2011). "Crack propagation laws corresponding to a generalized el haddad equation". International Journal of Aerospace and Lightweight Structures, Vol. 1, No. 1, pp. 109-118.