DOI QR코드

DOI QR Code

A structural model updating method using incomplete power spectral density function and modal data

  • Esfandiari, Akbar (Department of Civil Engineering, Sharif University of Technology) ;
  • Chaei, Maryam Ghareh (Department of Marine Technology, Amirkabir University of Technology) ;
  • Rofooei, Fayaz R. (Department of Civil Engineering, Sharif University of Technology)
  • 투고 : 2017.12.26
  • 심사 : 2018.07.12
  • 발행 : 2018.10.10

초록

In this study, a frequency domain model updating method is presented using power spectral density (PSD) data. It uses the sensitivity of PSD function with respect to the unknown structural parameters through a decomposed form of transfer function. The stiffness parameters are captured with high accuracy through solving the sensitivity equations utilizing the least square approach. Using numerically noise polluted data, the model updating results of a truss model prove robustness of the method against measurement and mass modelling errors. Results prove the capabilities of the method for parameter estimation using highly noise polluted data of low ranges of excitation frequency.

키워드

참고문헌

  1. Araujo dos Santos, J.V., Mota Soares, C.M., Mota Soares, M.A. and Maia, N.M.M. (2005), "Structural damage identification in laminated structures using FRF data", Compos. Struct., 67(2), 239-249. https://doi.org/10.1016/j.compstruct.2004.09.011
  2. Bakhtiari Nejad, F., Rahai, A. and Esfandiari, A. (2004), "A structural damage detection method using static noisy data", Eng. Struct., 27(12), 1784-1793. https://doi.org/10.1016/j.engstruct.2005.04.019
  3. Bruggi, M. and Mariani, S. (2013), "Optimization of sensor placement to detect damage in flexible plates", Eng. Optim., 45(6), 659-676. https://doi.org/10.1080/0305215X.2012.690870
  4. Ditommaso, R., Mucciarelli, M. and Ponzo F.C. (2012), "Analysis of non-stationary structural systems by using a band-variable filter", Bull Earthq. Eng., 10, 895-911.
  5. Ditommaso, R. and Ponzo, F.C. (2015), "Automatic evaluation of the fundamental frequency variations and related damping factor of reinforced concrete framed structures using the short time impulse response function (STIRF)", Eng. Struct., 82, 104-112.
  6. Ditommaso, R., Ponzo, F.C. and Auletta, G. (2015), "Damage detection on framed structures: modal curvature evaluation using Stockwell Transform under seismic excitation", Earthq. Eng. Eng. Vibr., 14(2), 265-274. https://doi.org/10.1007/s11803-015-0022-5
  7. Entezami, A., Shariatmadar, H. and Sarmadi, H. (2017), "Structural damage detection by a new iterative regularization method and an improved sensitivity function", J. Sound Vibr., 399, 285-307. https://doi.org/10.1016/j.jsv.2017.02.038
  8. Esfandiari, A., Bakhtiari-Nejad, F., Rahai, A. and Sanayei, M. (2009), "Structural model updating using frequency response function and quasi-linear sensitivity equation", J. Sound Vibr., 236(3), 557-573.
  9. Esfandiari, A., Bakhtiari-Nejad, F., Sanayei, M. and Rahai, A. (2010), "Structural finite element model updating using transfer function data", Comput. Struct., 88(1-2), 54-64. https://doi.org/10.1016/j.compstruc.2009.09.004
  10. Eun, H.C., Cho, D.H., Ahn, Y.J. and Lee, S.G. (2015), "Damage identification of truss structure using power spectral density estimation", Adv. Sci. Technol. Lett., 100, 61-66.
  11. Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: A review and comparative study", Struct. Health Monitor., 10(1), 83-111.
  12. Fox, R.L. and Kapoor, M.P. (1969), "Rates of change of eigenvalues and eigenvectors", AIAA J., 6(12), 2426-2429. https://doi.org/10.2514/3.5008
  13. Gang, X., Chai, S., Allemang, R.J. and Li, L. (2014), "A new iterative model updating method using incomplete frequency response function data", J. Sound Vibr., 333, 2443-2453. https://doi.org/10.1016/j.jsv.2013.12.008
  14. Kammer, D.C. and Nimityongskul, S. (2009), "Frequency band averaging of spectral densities for updating finite element models", J. Vibr. Acoust., 131(4), 041007-10.
  15. Kim, B.H., Joo, H.J. and Park, T. (2007), "Damage evaluation of an axially loaded beam using modal flexibility", KSCE J. Civil Eng., 11(2), 101-110. https://doi.org/10.1007/BF02823853
  16. Kumar, R.P., Oshima, T., Mikami, S., Miyamori, Y. and Yamazaki, T. (2012), "Damage identification in a lightly reinforced concrete beam based on changes in the power spectral density", Struct. Infrastruct. Eng., 8(8), 715-727. https://doi.org/10.1080/15732471003730674
  17. Li, Y.Y. and Chen, Y. (2013), "A review on recent development of vibration-based structural robust damage detection", Struct. Eng. Mech., 45(2), 159-168. https://doi.org/10.12989/sem.2013.45.2.159
  18. Li, J., Hao, H. and Lo, J.V. (2015), "Structural damage identification with power spectral density transmissibility: Numerical and experimental studies", Smart Struct. Syst., 15(1), 15-40. https://doi.org/10.12989/sss.2015.15.1.015
  19. Li, J., Hao, H., Xia, Y. and Zhu, H.P. (2015), "Damage assessment of shear connectors with vibration measurements and power spectral density transmissibility", Struct. Eng. Mech., 54(2), 257-289. https://doi.org/10.12989/SEM.2015.54.2.257
  20. Liberatore, S. and Carman, G.P. (2004), "Power spectral density analysis for damage identification and location", J. Sound Vibr., 274, 761-776.
  21. Liberatore, S., Carman, G.P. and Speyer, J.L. (2001), "Power spectral density (PSD) technique in damage detection", Proceedings of the Spie-the International Society for Optical Engineering., 4327, 213-222.
  22. Min, C.H., Hong, S., Park, S.Y. and Park, D.C. (2014), "Sensitivity-based finite element model updating with natural frequencies and zero frequencies for damped beam structures", Int. J. Nav. Arch. Ocean, 6(4), 904-921. https://doi.org/10.2478/IJNAOE-2013-0221
  23. Moradipour, P., Chan, T.H.T. and Gallage, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., 54(1), 105-119. https://doi.org/10.12989/SEM.2015.54.1.105
  24. Natke, H.G., Lallement, G., Cottin, N. and Prells, U. (1995), "Properties of various residuals within updating of mathematical models", Inv. Probl. Sci. Eng.,1(4), 329-348. https://doi.org/10.1080/174159795088027589
  25. Newland, D.E. (1993), An Introduction to Random Vibration, Spectral and Wavelate Analysis, 3rd Edition, John Wiley & Sons.
  26. Pedram, M., Esfandiari, A. and Khedmati, M.R. (2017), "Damage detection by a FE model updating method using power spectral density: Numerical and experimental investigation", J. Sound Vibr., 397(9), 51-76. https://doi.org/10.1016/j.jsv.2017.02.052
  27. Pedram, M., Esfandiari, A. and Khedmati, M.R. (2016), "Finite element model updating using strain-based power spectral density for damage detection", Struct. Contr. Health Monitor., 23, 1-15.
  28. Petrovic, B., Parolai, S., Pianese, G., Dikmen, S.U., Moldobekov, B., Orunbaev, S. and Paolucci, R. (2017), "Joint deconvolution of building and downhole seismic recordings: An application to three test cases", Bull Earthq. Eng.
  29. Sanayei, M. and Onipede, O. (1991) "Damage assessment of structures using static test data", AIAA J., 29(7), 1174-1179. https://doi.org/10.2514/3.10720
  30. Wang, S.Q. and Li, H.J. (2012), "Assessment of structural damage using natural frequency changes", Acta Mech. Sin., 28(1), 118-127. https://doi.org/10.1007/s10409-012-0017-7
  31. Xu, Y. and Zhu, W. (2017), "Non-model-based damage identification of plates using measured mode shapes", Struct. Health Monitor., 16(1), 3-23. https://doi.org/10.1177/1475921716655974
  32. Yang, T. Fan, S.H. and Lin, C.H. (2003), "Joint stiffness identification using FRF measurements", Comput. Struct., 81, 2549-2556. https://doi.org/10.1016/S0045-7949(03)00328-6
  33. Yazdanpanah, O., Seyedpoor, S.M. and Akbarzadeh Bengar, H. (2015), "A new damage detection indicator for beams based on mode shape data", Struct. Eng. Mech., 53(4), 725-744. https://doi.org/10.12989/sem.2015.53.4.725
  34. Zhang, J., Xu, J.C., Guo, S.L. and Wu, Z.S. (2013), "Flexibility-based structural damage detection with unknown mass for IASC-ASCE benchmark studies", Eng. Struct., 48, 486-496. https://doi.org/10.1016/j.engstruct.2012.10.005
  35. Zheng, Z.D., Lu, Z.R., Chen, W.H. and Liu, J.K. (2015), "Structural damage identification based on power spectral density sensitivity analysis of dynamic responses", Comput. Struct., 146, 176-184. https://doi.org/10.1016/j.compstruc.2014.10.011