참고문헌
- Han, S. R., "A Study on the Deformation Optimization of a Plastic Bezel Assembled on the Steering Wheel of an Automobiles," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 105-112, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.105
- Lee, B. K. and Kim, J. H., "Manufacturing of Micromolds for Plastic Molding Technologies via Synchrotron LIGA Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 1-7, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.001
- Lee, I. G. and Kim, J. H., "Thermo-Chemical Treatment Characteristics of Recycling Oil Obtained from Pyrolysis of Refused Plastics," The 2006 International Symposium on the Recycling of Polymers, pp. 39-54, 2006.
- Lee, K. T., Gyoung, Y. S. and Park, T. K., "Studies on the Analysis of DOA in PVC Wrap Film and its Migration into Foodstuffs," Korean J. Food SCI. TECHNOL., Vol. 22, No. 2, pp. 145-149, 1990.
- Kim, K. S., "The Research on Upcycling of Recovered Pulp and Mixed Plastic from Soiled Diaper," Journal of the Korean Institute of Resources Recycling, Vol.24, No.5, pp. 22-32, 2015. https://doi.org/10.7844/kirr.2015.24.5.22
- Chung, S. H., Na, J. G., Kim, S. G., Woo, H. M. and Kim, Y. T., "Feedstock Recycling Technologies using Waste Vinyls," Journal of the Korean Institute of Resources Recycling, Vol.22, No.4, pp. 46-54. 2013. https://doi.org/10.7844/kirr.2013.22.4.46
- Kang, C. M., "A Study on Environmental Standards Establishment for Discarding Synthesized Polymer Renewable Material," Graduate School of Industry, Seoul National University of Science & Technology, pp. 1-105, 2010.
- Lee, K. T., Lee, J. P., Choi, W. S., Woo, M. J. and Lee J. R., "Material Tests for the Evaluation of Safety Aspects for Recycled Plastic 'Tarai' as a Food Container," J. of KORRA, Vol. 12, No. 2, pp. 41-51, 2004.
- KS, KS T 1081:2014