References
- DiBitonto, D. D., Eubank, P. T. et al., "Theoretical models of the electrical discharge machining process. I. A. simple cathode erosion model," Journal of Applied Physics, Vol. 66, No. 9, pp. 4095-4103, 1989. https://doi.org/10.1063/1.343994
- Song, K. Y., "DEVELOPMENT OF STRIP EDM," A Thesis for a Doctorate, Seoul National University, Republic of Korea, 2012
- Tsai, H. C., Yan, B. H., Huang, F. Y., "EDM performance of Cr/Cu-based composite electrodes," International Journal of Machine Tools and Manufacture, Vol. 43, No. 3, pp. 245-252, 2003. https://doi.org/10.1016/S0890-6955(02)00238-9
- Kim, C. H., "Improvement of the ED-Drilling Machinability using Multi-hole Electrodes," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 88-93, 2012.
- Tsai, H. C., Yan, J. H. and Huang, F. Y., 2003, EDM performance of Cr/Cu-based composite electrodes, International Journal of Machine Tools and Manufacture Vol. 43, No. 3, pp. 245-252 https://doi.org/10.1016/S0890-6955(02)00238-9
- Ho, K. H. and Newman, S. T., "State of the art electrical discharge machining (EDM)", International Journal of Machine Tools and Manufacture Vol. 43, No.13, pp.1287-1300, 2003. https://doi.org/10.1016/S0890-6955(03)00162-7
- Song, K. Y., Chung, D. K., Park, M. S. and Chu, C. N., "Tape EDM", Proceedings of KSPE 2012 spring Conference :11-12
- Sanjeev Kumar, Rupinder Singh, T.P. Singh and B. L. Sethi, "Surface modification by electrical discharge machining", Journal of Materials Processing Technology Vol. 209, No. 8, pp.3675-3687, 2009. https://doi.org/10.1016/j.jmatprotec.2008.09.032
- Krishna, K., S., Anand, S., S., Sanjay, A., "Experimental investigation into the micro-EDM characteristics of conductive SiC," Journal of Ceramics International,Vol. 42 No. 1, pp. 1597-1610, 2016. https://doi.org/10.1016/j.ceramint.2015.09.111
- Kwon, W. T., Kim, Y. C., "Process Optimization for Productivity Improvement during EDM machining of a micro-hole," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21 No.4. pp. 556-562, 2012. https://doi.org/10.7735/ksmte.2012.21.4.556
- Lee, C. S., "A Method of Hole Pass-Through Evaluation for EDM Drilling," Journal of the Korean Institute of Industrial Engineers, Vol. 38, No. 3, pp. 220-226, September 2012. https://doi.org/10.7232/JKIIE.2012.38.3.220
- Kumar, N. M., Kumaran, S. S., Kumaraswamidhas, L. A., "An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites," Journal of Alloys and Compounds, Vol. 650, pp. 318-327, 2015. https://doi.org/10.1016/j.jallcom.2015.07.292
- Ferreira, J. C., "A study of die helical thread cavity surface finish made by Cu-W electrodes with planetary EDM," International Journal of Advanced Manufacturing Technology, Vol. 34, No. 11-12, pp. 1120-1132, 2007. https://doi.org/10.1007/s00170-006-0687-z
- Kim, B., H., "Micro Hole Machining Using MEDM with Screw-Type Electrode," Master Thesis, Seoul University 1999.
- Lee, E., J., "A Study on the Electrical Discharge Machining Tap by using Cu Electrodes of the Cold-Work Tool Steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 131-136, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.131
- Park, I., S., "A Study on the Electrical Discharge Blind Hole Tap Machining of STD11 with Copper Electrode" Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 38-44, 2017.
Cited by
- A Study on the Development of Hall Effect Sensor for Hydraulic Locking Alarm in Ship's Steering Gear vol.18, pp.1, 2018, https://doi.org/10.14775/ksmpe.2019.18.1.116