과제정보
연구 과제 주관 기관 : National Natural Science Foundation of China, Natural Science Foundation of Shanxi Province
참고문헌
- M. Ruffo, C. Tuck, R.J.M. Hague, Cost estimation for rapid manufacturing: laser sintering production for low to medium volumes. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 220, 1417-1427 (2006) https://doi.org/10.1243/09544054JEM517
- S.H. Huang, P. Liu, A. Mokasdar, L. Hou, Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Technol. 67, 1191-1203 (2013) https://doi.org/10.1007/s00170-012-4558-5
- K.V. Wong, A. Hernandez, A review of additive manufacturing. ISRN Mech. Eng. 2, 1-10 (2012)
- M.H. Farshidianfar, A. Khajepour, A.P. Gerlich, Effect of realtime cooling rate on microstructure in Laser Additive Manufacturing. J. Mater. Process. Technol. 231, 468-478 (2016) https://doi.org/10.1016/j.jmatprotec.2016.01.017
- C.A. Brice, B.T. Rosenberger, S.N. Sankaran et al., Chemistry control in electron beam deposited titanium alloys. Mater. Sci. Forum 618, 155-158 (2009)
- Y. Ma, D. Cuiuri, N. Hoye et al., The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in situ alloying and gas tungsten arc welding. Mater. Sci. Eng. A 631, 230-240 (2015) https://doi.org/10.1016/j.msea.2015.02.051
- F. Martina, J. Mehnen, S.W. Williams et al., Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V. J. Mater. Process. Technol. 212, 1377-1386 (2012) https://doi.org/10.1016/j.jmatprotec.2012.02.002
- E. Brandl, A. Schoberth, C. Leyens, Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater. Sci. Eng. A 532, 295-307 (2012) https://doi.org/10.1016/j.msea.2011.10.095
- J.Y. Bai, C.L. Fan, S.B. Lin et al., Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing. Int. J. Adv. Manuf. Technol. 87, 1-9 (2016)
- J.Y. Bai, C.L. Yang, S.B. Lin et al., Mechanical properties of 2219-Al components produced by additive manufacturing with TIG. Int. J. Adv. Manuf. Technol. 86, 1-7 (2015)
- J.Y. Bai, C.L. Fan, S.B. Lin et al., Mechanical properties and fracture behaviors of GTA-additive manufactured 2219-Al after an especial heat treatment. J. Mater. Eng. Perform. 26, 1808-1816 (2017) https://doi.org/10.1007/s11665-017-2627-5
- J. Gu, J. Ding, S.W. Williams et al., The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys. J. Mater. Process. Technol. 230, 26-34 (2016) https://doi.org/10.1016/j.jmatprotec.2015.11.006
- J. Gu, J. Ding, S.W. Williams et al., The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy. Mater. Sci. Eng. A 651, 18-26 (2016) https://doi.org/10.1016/j.msea.2015.10.101
- H. Geng, J. Xiong, D. Huang et al., A prediction model of layer geometrical size in wire and arc additive manufacture using response surface methodology. Int. J. Adv. Manuf. Technol. 2015, 1-12 (2015)
- A.S. Haselhuhn, B. Wijnen, G.C. Anzalone et al., In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing. J. Mater. Process. Technol. 226, 50-59 (2015) https://doi.org/10.1016/j.jmatprotec.2015.06.038
- H. Geng, J. Li, J. Xiong et al., Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy. Sci. Technol. Weld Join 2016, 1-12 (2016)
- A.S. Haselhuhn, M.W. Buhr, B. Wijnen et al., Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing. Mater. Sci. Eng. A 673, 511-523 (2016) https://doi.org/10.1016/j.msea.2016.07.099
- H. Geng, J. Li, J. Xiong et al., Geometric limitation and tensile properties of wire and arc additive manufacturing 5A06 aluminum alloy parts. J. Mater. Eng. Perform. 26, 1-9 (2016)
- C. Zhang, Y. Li, M. Gao et al., Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source. Mater. Sci. Eng. A 711, 415-423 (2018) https://doi.org/10.1016/j.msea.2017.11.084
- S. Zhou, Z. Zhang, M. Li et al., Effect of Sc on microstructure and mechanical properties of as-cast Al-Mg alloys. Mater. Des. 90(6), 1077-1084 (2016) https://doi.org/10.1016/j.matdes.2015.10.132
- J.D. Ming, W.C. Li, Y.U. Jie et al., Cleavage and intergranular fracture in Al-Mg alloys. Mater. Sci. Technol. 49, 387-392 (2002)
-
N.K. Babu, K. Kallip, M. Leparoux et al., Influence of microstructure and strengthening mechanism of AlMg5-
$Al_2O_3$ , nanocomposites prepared via spark plasma sintering. Mater. Des. 95, 534-544 (2016) https://doi.org/10.1016/j.matdes.2016.01.138 - Oyvind Ryen, B. Holmedal, O. Nijs et al., Strengthening mechanisms in solid solution aluminum alloys. Metall. Mater. Trans. A 37, 1999-2006 (2006) https://doi.org/10.1007/s11661-006-0142-7
- E.L. Huskins, B. Cao, K.T. Ramesh, Strengthening mechanisms in an Al-Mg alloy. Mater. Sci. Eng. A 527, 1292-1298 (2010) https://doi.org/10.1016/j.msea.2009.11.056
- M. Zha, X.T. Meng, H.M. Zhang et al., High strength and ductile high solid solution Al-Mg alloy processed by a novel hard-plate rolling route. J. Alloys Compd. 728, 872-877 (2017) https://doi.org/10.1016/j.jallcom.2017.09.017
피인용 문헌
- Modified TIG Welding Joint Process: An Approach to Improve Microstructure and Fracto-Mechanical Behavior by MWCNTs Inducement in Al-Mg-Si Alloy vol.12, pp.9, 2018, https://doi.org/10.3390/ma12091441
- Research advances in high-energy TIG arc welding vol.104, pp.1, 2018, https://doi.org/10.1007/s00170-019-03918-5
- Controlling the porosity using exponential decay heat input regimes during electron beam wire-feed additive manufacturing of Al-Mg alloy vol.108, pp.9, 2018, https://doi.org/10.1007/s00170-020-05539-9
- The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review vol.11, pp.18, 2021, https://doi.org/10.3390/app11188619