DOI QR코드

DOI QR Code

Assessment of ASCE 7-10 for wind effects on low-rise wood frame buildings with database-assisted design methodology

  • He, Jing (Department of Civil and Env. Eng., Louisiana State University) ;
  • Pan, Fang (Southwest Research Institute) ;
  • Cai, C.S. (Department of Civil and Env. Eng., Louisiana State University)
  • Received : 2017.09.10
  • Accepted : 2018.03.06
  • Published : 2018.09.25

Abstract

The design wind pressure for low-rise buildings in the ASCE 7-10 is defined by procedures that are categorized into the Main Wind Force-Resisting System (MWFRS) and the Components and Cladding (C&C). Some of these procedures were originally developed based on steel portal frames of industrial buildings, while the residential structures are a completely different structural system, most of which are designed as low-rise light-frame wood constructions. The purpose of this study is to discuss the rationality (or irrationality) of the extension of the wind loads calculated by the ASCE 7-10 to the light-frame wood residential buildings that represent the most vulnerable structures under extreme wind conditions. To serve this purpose, the same approach as used in the development of Chapter 28 of the ASCE 7-10 that envelops peak responses is adopted in the present study. Database-assisted design (DAD) methodology is used by applying the dynamic wind loads from Louisiana State University (LSU) database on a typical residential building model to assess the applicability of the standard by comparing the induced responses. Rather than the postulated critical member demands on the industrial building such as the bending moments at the knee, the maximum values at the critical points for wood frame buildings under wind loads are used as indicators for the comparison. Then, the critical members are identified through these indicators in terms of the displacement or the uplift force at connections and roof envelope. As a result, some situations for each of the ASCE 7 procedures yielding unconservative wind loads on the typical low-rise residential building are identified.

Keywords

Acknowledgement

Supported by : NSF

References

  1. ASCE (2010), "Minimum Design Loads for Buildings and Other Structures", ASCE/SEI 7-10, Reston, VA.
  2. Coffman, B.F., Main, J.A., Duthinh, D. and Simiu, E. (2010), "Wind effects on low-rise buildings: database-assisted design versus ASCE 7-05 Standard estimates", J. Struct. Eng., 136(6), 744-748. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000140
  3. Cook, R.A. and Soltani, M. (1994), "Hurricanes of 1992", American Society of Civil Engineers, New York, NY.
  4. Davenport, A.G., Surry, D. and Stathopoulos, T. (1978), "Wind loads on low-rise buildings", Final report on phase III, BLWTSS4; Univ. of Western Ontario, London, ON, Canada.
  5. Douglas, B.K. and Weeks, B.R. (2003), "Considerations in wind design of wood structures", AF&PA. Washington, DC.
  6. Engineering Science Data Unit (ESDU) (1990), "Strong Winds in the Atmospheric Boundary Layer. Part 1. Mean-Hourly Wind Speeds", Data Item 82026.
  7. Federal Emergency Management Agency (FEMA) (1993), "Hurricane Andrew in Florida, Report #22", Washington, D.C.
  8. Federal Emergency Management Agency (FEMA) (2005), "Hurricane Charley in Florida, Report #488", Washington, D.C.
  9. Fischer, C. and Kasal, B. (2009), "Analysis of light-frame, lowrise buildings under simulated lateral wind loads", Wind Struct., 12(2), 89-101. https://doi.org/10.12989/was.2009.12.2.089
  10. Gavanski, E., Kordi, B., Kopp, G.A. and Vickery, P.J. (2012), "Wind loads on roof sheathing of houses", J Wind Eng. Ind. Aerod., 114, 106-121.
  11. Gregg, J.P. (2006), "Development and application of methods for evaluation of hurricane shelters", M.S. Thesis, Louisiana State University, Baton Rouge, LA.
  12. He, J., Pan, F. and Cai, C.S. (2017), "A review of wood-frame low-rise building performance study under hurricane winds", Eng. Struct., 141, 512-529. https://doi.org/10.1016/j.engstruct.2017.03.036
  13. He, J., Pan, F., Cai, C.S., Chowdhury, A. and Habte, F. (2018), "Finite-element modeling framework for predicting realistic responses of light-frame low-rise Buildings under wind loads", Eng. Struct., 164, 53-69. https://doi.org/10.1016/j.engstruct.2018.01.034
  14. Isyumov, N. and Case, P. (1995), "Evaluation of structural wind Loads for low-rise buildings contained in ASCE Standard 7-1995 (Feb. 1995 draft)", BLWT-SS17-1995, Univ. of Western Ontario, ON, Canada.
  15. Jacklin, R.B., El Damatty, A. and Dessouki, A. (2014), "Finiteelement modeling of a light-framed wood roof structure", Wind Struct., 19(6), 603-621. https://doi.org/10.12989/was.2014.19.6.603
  16. Kopp, G.A., Surry, D. and Mans, C. (2005), "Wind effects of parapets on low buildings: Part 1. Basic aerodynamics and local loads", J Wind Eng. Ind. Aerod., 93 (11), 817-841. https://doi.org/10.1016/j.jweia.2005.08.006
  17. Kwon, D.K., Kareem, A., Kumar, D. and Tamura, Y. (2016), "A prototype online database-enabled design framework for wind analysis/design of low-rise buildings", Front. Struct. Civil Eng., 10(1), 121-130. https://doi.org/10.1007/s11709-015-0329-3
  18. Martin, K.G., Gupta, R., Prevatt, D.O., Datin, P.L. and van de Lindt, J.W. (2011), "Modeling system effects and structural load paths in a wood-framed structure", J. Archit. Eng., 17(4), 134-143. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000045
  19. Mehta, K.C. and Marshall, R.D. (1998), "Guide to the use of the wind load provisions of ASCE 7-95", American Society of Civil Engineers Press, Reston, Va.
  20. Mensah, A.F., Datin, P.L., Prevatt, D.O., Gupta, R. and van de Lindt, J.W. (2011), "Database-assisted design methodology to predict wind-induced structural behavior of a light-framed wood building", Eng. Struct., 33, 674-684. https://doi.org/10.1016/j.engstruct.2010.11.028
  21. Morrison, M.J. (2010), "Response of a two-story residential house under realistic fluctuating wind loads", PhD Thesis, Department of Engineering, The University of Western Ontario, London, Ontario, Canada
  22. Pan, F, Cai, C.S. and Zhang, W. (2013), "Wind-induced internal pressures of buildings with multiple openings", J. Eng. Mech., 139(3), 376-385. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000464
  23. Pielke, R.A. and Landsea, C.W. (1998), "Normalized hurricane damages in the United States, 1925-1995", Weather Forecast., 621-631.
  24. Reinhold, T.A. (2005), "Assessing the performance of modern building codes & standards in reducing hurricane damage", Presentation for Meeting of Task Force on Long-Term Solutions Florida's Hurricane Insurance Market.
  25. Roueche, D.B., Prevatt, D.O., Haan, F.L. and Datin, P.L. (2015), "An estimate of tornado loads on a wood-frame building using database-assisted design methodology", J. Wind Eng. Ind. Aerod., 138, 27-35. https://doi.org/10.1016/j.jweia.2014.11.011
  26. Shanmugam, B., Nielson, B.G. and Prevatt, D.O. (2009), "Statistical and analytical models for roof components in existing light-framed wood structures", Eng. Struct., 31, 2607-2616. https://doi.org/10.1016/j.engstruct.2009.06.009
  27. Sparks, P.R. (1991), "Hurricane Hugo in perspective", NIST Special Publication 820, National Institute of Standards & Technology, 29-37.
  28. St. Pierre, L.M., Kopp, G.A., Surry, D. and Ho, T.C.E. (2005), "The UWO contribution to the NIST aerodynamic database for wind loads on low buildings. 2: Comparison of data with wind load provisions", J. Wind Eng. Ind. Aerod., 93(1), 31-59. https://doi.org/10.1016/j.jweia.2004.07.007
  29. Tieleman, H., Elsayed, M. and Hajj, M. (2006), "Peak wind load comparison: Theoretical estimates and ASCE 7", J. Struct. Eng., 132(7), 1150-1157. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:7(1150)
  30. Trautner, C. and Ojdrovic, R. (2013), "Comparison of directional and envelope wind load provisions of ASCE 7", J. Struct. Eng., 140(4).
  31. van de Lindt, J. and Dao, T. (2009), "Performance-based wind engineering for wood-frame buildings", J. Struct. Eng., 135(2), 169-177. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:2(169)