References
- G. J. Kish, and M. Ranjram, "A modular multilevel DC/DC converter with fault blocking capability for HVDC interconnects," IEEE Trans. Power Electron., Vol. 30, No. 1, pp.148-162, Jan. 2015. https://doi.org/10.1109/TPEL.2013.2295967
- D. Vinnikov, J. Laugis, and I. Galkin, "Middle-frequency isolation transformer design issues for the high-voltage DC/DC converter," in 2008 Power Electronics Specialists Conference, pp. 1930-1936, 2008.
- S. Vighetti and J.-P. Ferrieux "Optimization and design of a cascaded DC/DC converter devoted to grid-connected photovoltaic systems," IEEE Trans. Power Electron., Vol. 27, No. 4, pp. 2018-2027, Apr. 2012. https://doi.org/10.1109/TPEL.2011.2167159
- R. Kadri and J.-P. Gaubert, “Nondissipative string current diverter for solving the cascaded DC–DC converter connection problem in photovoltaic power generation system,” IEEE Trans. Power Electron., Vol. 27, No. 3, pp. 1249-1258, Mar. 2012. https://doi.org/10.1109/TPEL.2011.2164268
- S. L Undberg, "Wind farm configuration and energy efficiency studies - Series dc versus ac layouts," Ph.D. dissertation, Chalmers University of Technology, Sweden, 2006.
- C. Meyer, "Key components f or future offshore dc grids," Ph.D. dissertation, Inst. Power Generation and Storage Systems, R W TH Aachen University, Aachen, Germany, 2007.
- Z. Chen, S. Liu, and L. Shi, “A soft switching full bridge converter with reduced parasitic oscillation in a wide load range,” IEEE Trans. Power Electron., Vol. 29, No. 2, pp. 801-812, Feb. 2014. https://doi.org/10.1109/TPEL.2013.2257868
- X. Hu, and C. Gong, "A high voltage gain dc-dc converter integrating coupled-inductor and diode-capacitor techniques," IEEE Trans. Power Electron., Vol. 29, No. 2, pp. 789-800, Feb. 2014. https://doi.org/10.1109/TPEL.2013.2257870
- F. S. Garcia, J. A. Pomilio, and G. Spiazzi, “Modeling and control design of the interleaved double dual boost converter,” IEEE Trans. Ind. Electron., Vol. 60, No. 8, pp. 1292-1300, Aug. 2013. https://doi.org/10.1109/TED.2013.2248278
- K. C. Tseng, C. C. Huang, and W. Y. Shih, “A high step-up converter with a voltage multiplier module for a photovoltaic system,” IEEE Trans. Power Electron., Vol. 28, No. 6, pp. 3047-3057, Jun. 2013. https://doi.org/10.1109/TPEL.2012.2217157
- L. Huber and M. M. Jovanovic, "A design approach for server power supplies for networking applications," Proc. IEEE Applied Power Electronics Conf. And Exposition, pp. 1163-1169, 2000.
- L. Huber and M. M. Jovanovic, "A design approach for server power supplies for networking applications," Proc. IEEE Applied Power Electronics Conf. And Exposition, pp. 1163-1169, 2000.
- M. S. Elmore, "Input current ripple cancellation in synchronized, parallel connected critically continuous boost converters," in Proc. IEEE Appl. Power Electron. Conf., pp. 152-158, 1996.
- C. H. Chan and M. H. Pong, "Input current analysis of interleaved boost converters operating in discontinuous-inductor current mode," in IEEE Power Electron. Spec. Conf., pp. 392-398, 1997.
- T. Ishii and Y. Mizutani, "Power factor correction using interleaving technique for critical mode switching converters," in IEEE Power Electron. Spec. Conf., pp. 905-910, 1998.
- N. Genc and I. Iskender, “DSP-based current sharing of average current controlled two-cell interleaved boost PFC converter,” IET Power Electron., Vol. 4, No. 9, pp. 1015-1022, Nov. 2011. https://doi.org/10.1049/iet-pel.2010.0349
- T. Nouri, S. H. Hosseini, E. Babaei, and J. Ebrahimi, “Interleaved high step-up dc-dc converter based on three-winding high-frequency coupled inductor and voltage multiplier cell,” IET Power Electron., Vol. 8, No. 2, pp. 175-189, Feb. 2015. https://doi.org/10.1049/iet-pel.2014.0165
- L. Po-Wa, Y. S. Lee, D. K. W. Cheng, and L. Xiu-Cheng, “Steady-state analysis of an interleaved boost converter with coupled inductors,” IEEE Trans. Ind. Electron., Vol. 47, No. 4, pp. 787-795, Aug. 2000. https://doi.org/10.1109/41.857959
- Y. Ye, K. W. E. Cheng, and S. Chen, “A high step-up PWM DC-DC converter with coupled-inductor and resonant switched-capacitor,” IEEE Trans. Power Electron., Vol. 32, No. 10, pp. 7739-7749, Nov. 2016. https://doi.org/10.1109/TPEL.2016.2633381
- F. H. Khan, L. M. Tolbert, and W. E. Webb, “Start-up and dynamic modeling of the multilevel modular capacitor-clamped converter,” IEEE Trans. Power Electron., Vol. 25, No. 2, pp. 519-531, Feb. 2010. https://doi.org/10.1109/TPEL.2009.2025273
- F. H. Khan, L. M. Tolbert, and W. E. Webb, "Hybird electric vehicle power management solutions based on isolated and nonisolated configurations of multilevel modular capacitor-clamped converter," IEEE Trans. Ind. Electron., Vol. 56, No. 8, pp. 3079-3095, May 2009. https://doi.org/10.1109/TIE.2009.2022074
- D. Cao, S. Jiang, and F. Z. Peng, “Optimal design of a multilevel modular capacitor-clampled DC-DC converter,” IEEE Trans. Power Electron., Vol. 28, No. 8, pp. 3816-3826, Aug. 2013. https://doi.org/10.1109/TPEL.2012.2231438
- F. H. Khan and L. M. Tolbert, “Multiple-load-source integration in a multilevel modular capacitor-clamped DC-DC converter featuring fault tolerant capability,” IEEE Trans. Power Electron., Vol. 24, No. 1, pp. 14-24, Jan. 2009. https://doi.org/10.1109/TPEL.2008.2006055
- L. Sun, F. Zhuo, F. Wang, and T. Zhu, "A non-isolated bidirectional soft-switching power-unit-based DC-DC converter with unipolar and bipolar structure for DC networks interconnection," IEEE Trans. Ind. Appl., Vol. 54, No. 3, pp. 2677-2689, Jan. 2018. https://doi.org/10.1109/TIA.2018.2797256