Abstract
In order to estimate behavior of soil mass which is located straight up of reinforced concrete culvert, Ritz method and FEM were applied and arching effects between the soil mass and adjacent soil were considered for the analyses. Analysis results obtained from the Ritz method and finite element method were compared with analytical solution. In the case of estimating nodal forces considered in FEM, caution is needed that shear stress depending on depth from ground surface should be reflected regardless of local coordinate system. Comparing the displacements computed from Ritz method with those of the analytic solution, it is seen that as the power of assumed displacement function increases, differences between the computed displacements and those of analytic solution decreases. It seems that displacements of FEM becomes closer to those of analytical solution as the number of elements are increased. It is seen that stresses computed from the Ritz method don't get closer to those of the analytic solution as the power of assumed displacement function. Stresses from FEM become closer to those of analytic solution as the number of elements are increased. Comparing the analysis results from the Ritz method and FEM with those of analytic solution, it can be seen that FEM is more reliable than Ritz method.
철근 콘크리트 암거 상부지반에 있어 아칭효과에 의한 지반의 상대적 변형 때문에 발생하는 침하거동을 평가하기 위해 Ritz 방법과 유한요소법을 적용하고 해석결과를 해석 해에 의한 결과와 상호 비교해 보았다. 유한요소법을 적용하여 절점외력을 구할 경우 요소별 국부좌표계에 관계없이 지표면으로부터의 깊이의 함수로 표현되는 전단응력이 반영되도록 주의할 필요가 있다. 암거 상부지반의 지표면에서의 변위는 해석방법에 상관없이 동일한 값을 보였다. Ritz 방법을 통해 구한 변위를 해석 해와 비교해 볼 때 가정한 변위의 차수를 증가시킬수록 해석 해에 근접한 결과를 보임을 알 수 있었다. 유한요소법에 의한 변위 또한 요소를 세분화 할수록 해석 해에 근접한 결과를 보임을 알 수 있었다. Ritz 방법에 의한 해석결과에 따르면 계산된 응력값이 해석 해에 근접한 결과를 보이지는 않았다. 유한요소법에 의한 응력의 경우 요소를 세분화 할수록 해석 해에 근접한 결과를 보였다. 본 연구에서 고려한 Ritz 방법과 유한요소법에 의한 해석결과를 해석 해와 비교한 결과 유한요소법에 의한 해석결과가 해석 해에 안정적으로 근접하는 결과를 보임을 알 수 있었다.