수산해양기술연구 (Journal of the Korean Society of Fisheries and Ocean Technology)

  • 제54권3호
  • /
  • Pages.246-254
  • /
  • 2018
  • /
  • 2671-9940(pISSN)
  • /
  • 2671-9924(eISSN)
한국수산해양기술학회 (The Korean Society of Fisheries and Ocean Technology)
권호 표지
DOI QR코드

DOI QR Code

연안어선용 열전발전 장치의 성능개선을 위한 연구

A study of performance improvement of a thermoelectric generation system for the coastal fishing boats

  • 이동길 (국립수산과학원 수산공학과) ;
  • 김현영 (국립수산과학원 수산공학과) ;
  • 배성윤 (국립수산과학원 수산공학과) ;
  • 김지연 (국립수산과학원 수산공학과) ;
  • 도용현 (국립수산과학원 남동해수산연구소) ;
  • 양용수 (국립수산과학원 수산공학과)
  • LEE, Donggil (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • KIM, Hyunyoung (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • BAE, Sungyoun (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • KIM, Jiyeon (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • DO, Yonghyun (Southeast Sea Fisheries Research Institute, National Institute of Fisheries Science) ;
  • YANG, Yongsu (Fisheries Engineering Research Division, National Institute of Fisheries Science)
  • 투고 : 2018.05.21
  • 심사 : 2018.08.13
  • 발행 : 2018.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, we developed a thermoelectric generation system for coastal fishing boats that allows for a high-density arrangement of thermoelectric modules, verified the improvement in performance by conducting comparative analysis between field test results and results from previous studies. The developed thermoelectric generation system was installed in a 3-ton gill-netter to analyze the engine revolutions per minute and energy production per day for each fishing process over a period of 20 days. From the experimental results, the maximum electric energy generated was 207.1 Wh, the minimum was 53.93 Wh and the average electric energy was 129.98 Wh. In accordance with the increasing of the engine r.p.m., the maximum electric production was 183 W at 1,500 r.p.m. It was approximately 80.5% of designed capacity, 227.2 W. Considering the result in the earlier research was 50.7% of designed capacity, 115.8 W. It was improved by 30% compared to the earlier one. The fishing operation was classified as departure, fishing and arrival. From the result on production analysis of electric energy, the composition of energy was 63% in fishing, 19.5% in departure and 17.5% in arrival. The electric energy production per unit hour was 42.8% in arrival, 32.9% in departure and 24.3% in fishing.

키워드

참고문헌

  1. Beeby SP, Tudor MJ and White NM. 2006. Energy harvesting vibration sources for microsystems applications. Meas Sci Technol 17(12), R175-R195. (DOI:10.1088/0957-0233/17/12/R01)
  2. Cakir FY and Stenstrom MK. 2005. Greenhouse gas production: a comparison between aerobic and anaerobic wastewater treatment technology. Water research 39(17), 4197-4203. (DOI:10.1016/j.watres.2005.07.042)
  3. Cha W, Choi K, Kim K and Lee K. 2012. A study on the way to improve efficiency of a waste heat recovery system for an automotive engine. Transactions of KSAE 20(4), 76-81. (DOI:10.7467/KSAE.2012.20.4.076)
  4. Chun HW and Jang MG. 2014. Marker and development trend of thermoelectric materials. ETRI Electronics and telecommunications trends 29(1), 104-112. (DOI:10.22648/ETRI.2014.J.290111)
  5. Crane D, LaGrandeur J, Jovovic V, Ranalli M, Adldinger M, Poliquin E, Dean J, Kossakovski D, Mazar B and Maranville C. 2013. TEG on-vehicle performance and model validation and what it means for further TEG development. Journal of electronic materials 42(7), 1582-1591. (DOI:10.1007/s11664-012-2327-8)
  6. Hong S, Chung Y, Kim J and Chun D. 2016. Analysis on the level of contribution to the national greenhouse gas reduction target in Korean transportation sector using LEAP model. Renewable and Sustainable Energy Reviews 60, 549-559. (DOI:10.1016/j.rser.2015.12.164)
  7. Hsiao YY, Chang WC and Chen SL. 2010. A mathematic model of thermoelectric module with applications on waste heat recovery from automobile engine. Energy 35(3), 1447-1454. (DOI:10.1016/j.energy.2009.11.030)
  8. Jang MG, Jun MS, Roh TM and Kim JD. 2008. Thermoelectric power generation with high efficiency. ETRI Electronics and telecommunications trends 23(6), 12-21. (DOI:10.22648/ETRI.2008.J.230603)
  9. Kim H, Tadesse Y and Priya S. 2009. Piezoelectric energy harvesting. In Energy Harvesting Technologies, 3-39. (DOI:10.1007/978-0-387-76464-1_1)
  10. Kumar S, Heister SD, Xu X, Salvador JR and Meisner GP. 2013. Thermoelectric generators for automotive waste heat recovery systems part I: numerical modeling and baseline model analysis. Journal of electronic materials 42(4), 665-674. (DOI:10.1007/s11664-013-2471-9)
  11. Lee D, Yang Y, Kim B, Kim S and Kim H. 2017. Application and verification analysis of the thermoelectric generation system for a coastal fishing vessel. J Korean Soc Fish Technol 53(2), 196-203. (DOI:10.3796/KSFT.2017.53.2.196)
  12. Lee JJ, Kim DH, Lee KH, Lim JK and Lee ST. 2014. Fundamental study of energy harvesting using thermoelectric module on road facilities. Int J Highw Eng 16(6), 51-57. (DOI:10.7855/IJHE.2014.16.6.051)
  13. Lee JK, Kim JW and Lee J. 2016. Current status of thermoelectric power generation technology. Appl Chem Eng 27(4), 353-357. (DOI:10.14478/ace.2016.1064)
  14. Liebl J, Neugebauer S, Eder A, Linde M, Mazar B and Stutz W. 2009. The thermoelectric generator from BMW is making use of waste heat. MTZ worldwide 70(4), 4-11. (DOI:10.1007/BF03226939)
  15. Meisner GP. 2011. Advanced thermoelectric materials and generator technology for automotive waste heat at GM. In Proceedings of the 2d Thermoelecrics Applications Workshop.
  16. Nema P, Nema RK and Rangnekar S. 2010. Minimization of green house gases emission by using hybrid energy system for telephony base station site application. Renewable and Sustainable Energy Reviews 14(6), 1635-1639. (DOI:10.1016/j.rser.2010.02.012)
  17. Olah GA, Goeppert A and Prakash GKS. 2008. Chemical recycling of carbon dioxide to methanol and dimethyl ether: from greenhouse gas to renewable, environmentally carbon neutral fuels and synthetic hydrocarbons. JOC 74(2), 487-498. (DOI:10.1021/jo801260f)
  18. Rao AB and Rubin ES. 2002. A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control. Environmental science & technology 36(20), 4467-4475. (DOI:10.1021/es0158861)
  19. Rowe DM and Min G. 1998. Evaluation of thermoelectric modules for power generation. Journal of power sources 73(2), 193-198. (DOI:10.1016/S0378-7753(97)02801-2)
  20. Ryu C. 2010. Potential of municipal solid waste for renewable energy production and reduction of greenhouse gas emissions in South Korea. Journal of the Air & Waste Management Association 60(2), 176-183. (DOI:10.3155/1047-3289.60.2.176)
  21. Sievers RK and Bankston CP. 1988. Radioisotope powered alkali metal thermoelectic converter design for space systems. Proceedings of the Twenty-third Intersociety Energy Conversion Engineering Conference 3 (SEE A89-15176 04-44), 159-167.
  22. Snyder GJ. 2009. Thermoelectric energy harvesting. In Energy Harvesting Technologies, 325-336. (DOI:10.1007/978-0-387-76464-1_11)
  23. Wu C. 1996. Analysis of waste-heat thermoelectric power generators. Applied Thermal Engineering 16(1), 63-69. (DOI:10.1016/1359-4311(95)00014-5)